Is it likely that there will be 1.45c for ARM processor?
The MIPS version works great for S*y DE (and anything else with cccam protocol)
Is it likely that there will be 1.45c for ARM processor?
The MIPS version works great for S*y DE (and anything else with cccam protocol)
not working on zegmma h7s box
Not correct. Tested.
can u help me ?
I already have: Mgcamd For arm based receivers - just read a bit...
But!
OSCam Emu works better! See the thread in the stickies in the OSCam Emu section and easy-peasy...
Display Morefound this on a german forum
got it working on openATV zero4k
i did not install with the ipk
i unpacked the ipk with 7zip
sent the bin to /usr/bin
the config files to /usr/keys
and just used telnet with this command
ln -s /lib/ld-linux-armhf.so.3 /lib/ld-linux.so.3
and the openATV start script in etc
mgcamd_135a.emu
with this inside
emuname = mgcamd_1.35a
binname = mgcamd_1.35a
startcam = /usr/bin/mgcamd_1.35a
stopcam = killall -9 mgcamd_1.35a
if you follow what is is said above you will get it working on
openATV VU+ Zero4K
nothing more to be said
Hi Tech
I cant find bin file in openatv mgcams 135 only files are inside the zip file are :
Usr/ Keys
ccamd
newlist
ignore
mg cfg
peer
priority
replace
enigma 2 plugin mgcamd135 ipk file
When that unzipped files inside are:
control.tar
data.tar
debian.binary
So where do i fins bin file ?
Where do i find OpenATV start script to go in etc ?
Also where do i find mgcamd135.emu with the following files
emuname = mgcamd_1.35a
binname = mgcamd_1.35a
startcam = /usr/bin/mgcamd_1.35a
stopcam = killall -9 mgcamd_1.35a
Thanks any help appreciated pls, using ULTIMO 4K with FBC Tuner and Dual Tuner alsoand having freezing probs with Oscam especially when trying to
record more than 2 channels constant freeze
Thanks
Eggie
Or could you send all files and where to put them pls.
ok the files are in previous post
only thing missing is this
help yourself
Hi Tech
I cant find bin file in openatv mgcams 135 only files are inside the zip file are :
Usr/ Keys
ccamd
newlist
ignore
mg cfg
peer
priority
replace
enigma 2 plugin mgcamd135 ipk file
When that unzipped files inside are:
control.tar
data.tar
debian.binary
So where do i fins bin file ?
Where do i find OpenATV start script to go in etc ?
Also where do i find mgcamd135.emu with the following files
emuname = mgcamd_1.35a
binname = mgcamd_1.35a
startcam = /usr/bin/mgcamd_1.35a
stopcam = killall -9 mgcamd_1.35a
Thanks any help appreciated pls, using ULTIMO 4K with FBC Tuner and Dual Tuner alsoand having freezing probs with Oscam especially when trying to
record more than 2 channels constant freeze
Thanks
Eggie
Or could you send all files and where to put them pls.
unzip the ipk with 7zip
as told in previous post
read it
enigma2-plugin-softcams-mgcamd-1.35a_openpli_armv7ahf-vfp-neon.ipk - mgcamd not work on duo4k openpli 7.x image.
in 'postinst' we have:
should be:
ln -s /lib/ld-2.25.so /lib/ld-linux.so.3
ln -s /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.1.0.0
then we got:
./mgcamd: /usr/lib/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by ./mgcamd)
OpenPli image include 1.0.2k openssl version
but this ssl version does not support ssl 1.0.0 :(
root@vuduo4k:/usr/bin# grep OPENSSL /usr/lib/libssl.so.1.0.2
OPENSSL_cleanse
OPENSSL_DIR_read
OPENSSL_DIR_end
OPENSSL_1.0.2d
OPENSSL_1.0.2g
OPENSSL_DIR_read(&ctx, '
OPENSSL_malloc Error
any solutions?
hi, i have satdream image installed on the mutant 51 4k and there are magikcam 1.35 plugins from its plugin but being the basic image Openpli on this works the same cam putting it on Openpli does not work, how to solve.
Sono riuscito a far funzionare MgCam 1.35 ma ho cambiato il file mg_cfg con quello di MgCam 1.38
ora funziona ma al cambio di canale devo riavviare la Cam chi può darmi informazioni su dove cambiare ...?
log log:
===== Nagra ECM su CaID 0x1805, pid 0x09f4 ======
prov: 000000
codice: 20 E2 36 38 8B DB 9C 02
cw1: 47 EF 44 7A 59 85 29 07
Firma OK
fonte: net (wwwwwwwwwwwww)
776 msec - lun 10 feb 12:23:12 2020
con immagine Satdream su Mutant 51 4k.
Ho aggiunto
lib
libcrypto.so.0.9.7
libssl.so.0.9.7
ora funziona bene ma non ho video sui tedeschi.
After a long search and reading, I can't get a working Mgcamd for VTI image on ULTIMO 4K.
Can someone come to my rescue please?
Thank you
After a long search and reading, I can't get a working Mgcamd for VTI image on ULTIMO 4K.
Can someone come to my rescue please?
Thank you
Forget it, NCam is much better.
Where can I get this Ncam please ? whiv cersion works on ARM
Thank you, but I actually wanted mgcamd for Ultimo 4K
Has someone ever got this "thing" to work on ARM receiver?
1.35..arm
Can you say more on this please?
Just quoting a number isn't enough
Mgcamd_1.35a vu duo 2 4Kse /lib/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found
mod libcrypto.so.1.0.2 work ok mgcamd_libcrypto.so.1.0.2_vu_2_4kse.rar
Don’t have an account yet? Register yourself now and be a part of our community!