Mgcamd For arm based receivers

Quote from samsid

also try disabling logging in mg.cfg, also if using BH 3.0.1 check are online updates available for 4k box as there were issues with box losing dns on the regular box 3,0,1 images, which were addressed via online update

Hi Samsid

I have the mg.cfg log in option to 00(Disabled) since I disabled the DLNA Servers it's been OK! I will also check for update later

Thanx
Regards

Quote from levi45

You need to know correct directions (some images has different directions than another image) if is the case need to play with script ;)

I did put the bin manually into OpenATV,and in Difference to BH the OpenatV has no camsript,I did used sript in ATV but no Cam was found.
I find no way Mgcamd to start in OpenATV (its so easy in Blackhole)

Quote from bak07

I did put the bin manually into OpenATV,and in Difference to BH the OpenatV has no camsript,I did used sript in ATV but no Cam was found.
I find no way Mgcamd to start in OpenATV (its so easy in Blackhole)

I too tried installing in different images to no avail, with BH it can be installed with remote manually install Bh(tgz) packages

Got it now working 100%

Thanks guys for the help!

Regards

As set correctly mg_cfg
thanks

got some help off carwash(such a great help but still having trouble clearing any virgin uk channels)

any help please if you's don't mind

this is cfg carwash sent

any help for me to clear uk cable be much appreciated

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 00 } 5 00

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
# 12 stapi/ IPbox DGS, openbox Sxx,Skyway & others
B: { 06 }

# Mapping 18xx
# 00 disable mapping
# 01 map 18xx to 1801
F: { 00 }

any help please (carwash) been trying all day to help me but we aint clearing uk channels on cable

- - - Updated - - -

I using latest bh image and updated it and used levi's mgcamd 1.35a in this thread and nothing clearing

Try my mg_cfg file add it to /usr/keys along with your newcamd.list

restart cam

i will give it a go let u know soon and thanks

- - - Updated - - -

still same
wonder wats goin wrong

my newcamd file works perfect on my duo 2
is it just a straight forward put in same place as I use to put on duo 2 ? var/keys

- - - Updated - - -

if some 1 could log into box view my team viewer n take a look see if I put something wrong
I know my newcamd.list working fine as on my other duo 2 down stairs

Hi Pizzaman

You may have the wrong area channels!

I seem to remember that you have to install cable XML file and then scan for your area channels . Have you done that?

I can scan for channels ok and any fta work fine
just not showing the paid channels

Quote from pizzaman

I can scan for channels ok and any fta work fine
just not showing the paid channels

but you still need to make sure you are also scanning the correct netid and frequency for your area

It's been so long since I worked with Cable files but i think you will still need the Nagra Rom files in /var/scce or var/keys

I 99.9% sure I am as scan same way on my duo 2 downstairs

any 1 with a vu 4k and on cable to help me please
and I thank you carwash for putting up with all my questions m8 cheers for helping

I did have oscam on but use to glitch now and then
hence the reason for trying to get mgcamd on it
but i'll give this a go

Hi,
i need mgcamd for vti-or openAtv-solo+4k please,can help me anybody ?

that's working abit better still the odd glitch
how do I update to latest oscam
as downloaded and gives me bin,changes and oscam on the folder

where do I send these to please
I am on openvix

Betterway was to got Magiccamd for ATV /VIX/VTI why is Mccamd only possible for Black Hole??

tried to get mgcamd on but wouldn't decode the channels dunno why as work sweet on my duo 2

Quote from levi45

here is the Mgcamd135a for solo4k works perfectly on BH image

This Mgcamd is working now for VTI Image too

German User psychokidd from Nachtfalke Rel... Forum made it possible with this Manual .It works fine in VTI

mgcamd.arm nach usr/bin (Attribute) Rechte auf 755
Ncam_Mgcamd135a.sh nach usr/script (Attribute) Rechte auf 777
Ncam_Mgcamd135a.del nach usr/uninstall (Attribute) Rechte auf 755 (auf frischen Images ist dieser odrner nicht vorhanden also kopiert ihr einfach den gesamten uninstall ordner in das usr Verzeichnis)
mg_cfg nach var/keys (Attribute) Rechte auf 755
Und natürlich die Newcamd.list in var/keys (Attribute) Rechte auf 755

Dann verbindet ihr euch per Telnet (ich benutze Putty) und setzt folgende Verknüpfungen

ln -s /lib/ld-2.21.so /lib/ld-linux.so.3
ln -s /lib/libcrypto.so.1.0.0 /lib/libcrypto.so.0.9.7

dann Startet ihr die Box neu und tadaaaaa mgcamd läuft...

Viel Spaß....

PS
Hoping that Someone fix it for OpenATV too

And it is possible for NFR too
putting this in EMU:
mgcamd.arm nach usr/bin (Attribute) Rechte auf 755
Ncam_Mgcamd135a.sh nach usr/script (Attribute) Rechte auf 777

and using Manual above