Hi i just got me a VU+ Zero and trying to get my Viasat card to work, i undersand i have to use oscam and have downloaded it from the Linux-sat plugin + the viasat config files. But it is not working, does not the VU+ Internal reader work on this card?
Vu+ Zero cardreader and viasat card help
-
- Videoguard2 Cards OSCam
- fjott70
- Thread is marked as Resolved.
-
-
Yes, works without problems, but the card must be paired with a sd tuner if you have a 093E card
Code
Display More[reader] label = Viasat protocol = internal device = /dev/sci1 caid = 093E boxid = xxxxxxxx detect = cd mhz = 450 cardmhz = 2700 group = 1 emmcache = 1,3,2,0 blockemm-unknown = 1 blockemm-s = 1
-
How do the vu + zero to do cards Canal Digitaal NL E 23.5 and 19.2
thanks
-
Yes, works without problems, but the card must be paired with a sd tuner if you have a 093E card[/CODE]
Its a 093E card yes, and i got a Sd tuner, so i just put the card in the tuner and its paired with the sd tuner? do i need any boxkey or how does this work?
-
If the card is paired to a HD tuner today ,you must call Viasat or login on your side
and switch around to sd tuner.
Put the card in SD tuner and wait until channels functioning in sd-box.
(you can call the telephone number that appears on your TV)And the answer is yes, you must have boxid converted to hex in oscam from sd-box
-
Ok, thanks for the help, one last question.. can i use cccam 2.3.0 with this card or does it just work in Oscam?
- - - Updated - - -
Got the 090E card working in Oscam, but i have not managed to get the c-lines to work yet.
Have tried all the setups i have found.oscam.conf
[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1[cccam]
port = 12000
version = 2.3.0
build = 3165
reshare = 1[newcamd]
key = 0102030405060708091011121314
port = 34001@093E:000000[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 10
httpallowed = 10.0.0.94 - 255.255.255.255
debug = 255[monitor]
appendchaninfo = 1oscam.server
oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10656
# Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt[reader]
label = VIASAT
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 093E
boxid = xxxxxxxx
detect = cd
mhz = 450
cardmhz = 2700
ident = 093E:000000
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-s = 1[reader]
enable=1
label = somename
protocol = cccam
device = ip dns,12000
user = user
password = pass
inactivitytimeout = 1
caid = 1702,1833,1830,0D05,0500,0B00
group = 1
cccversion = 2.3.0
ccckeepalive = 1oscam user
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10656
# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.user.txt[account]
user = linuxsatsupport
caid = 093E
keepalive = 1
au = VIASAT
group = 1
ident = 093E:000000 -
master G
Set the Label from General Oscam Support to NDS Videoguard Cards OSCam
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!