i need you help

There are 2 replies in this Thread which was already clicked 858 times. The last Post () by wg105.

    hi friend i need you help about oscam,card sharing,everytime i put card in reader only 8 hour and i get black screen provider killed my card,how to right config my oscam to sharing card and how to get ecm lowers.
    m using card


    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [internal] type: VideoGuard Astro Malaysia (09AC), caid: 09AC
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [internal] serial: ########, BoxID: ########, baseyear: 2004
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [internal] ready for requests
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [internal] found card system videoguard2
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] card detected
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] type: VideoGuard Astro Malaysia (09AC)
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] ------------------------------------------------------------------
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] +---------+----------+---------------------+---------------------+
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 003b --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 0035 --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 003e --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 0068 --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 00c0 --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 00c2 --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 00ec --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 00e6 --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 00e7 --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 00fa --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:26 482BC2BB r (reader) lower_card [videoguard2] |-- 00 ---|-- 00f3 --| 2017/01/26-00:00:00 |
    2017/01/12 10:56:27 482BC2BB r (reader) lower_card [videoguard2] |-- 01 ---|-- 0195 --| 2017/01/26-00:00:02 |


    i hope you can help me,,friend

    I receive this message , how to read the N3 1861


    2017/01/18 10:18:02 76B28958 h (reader) CNT [smartreader] creating thread for device Serial:Reader 3FABB5B
    2017/01/18 10:18:02 693C8C37 r (reader) CNT [smartreader] Reader initialized (device=Serial:Reader 3FABB5B, detect=cd, mhz= AUTO, cardmhz=534)
    2017/01/18 10:18:03 693C8C37 r (reader) CNT [smartreader] card detected
    2017/01/18 10:18:06 693C8C37 r (reader) CNT [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 39 30 20 4D 65 72 51 32 48 32
    2017/01/18 10:18:06 693C8C37 r (reader) CNT [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
    2017/01/18 10:18:06 693C8C37 r (reader) CNT [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
    2017/01/18 10:18:06 693C8C37 r (reader) CNT [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
    2017/01/18 10:18:07 693C8C37 r (reader) CNT [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
    2017/01/18 10:18:07 693C8C37 r (reader) CNT [smartreader] Card responded ok for ifsd request of 28
    2017/01/18 10:18:08 693C8C37 r (reader) CNT [smartreader] detect native nagra card
    2017/01/18 10:18:10 693C8C37 r (reader) CNT [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
    2017/01/18 10:18:11 693C8C37 r (reader) CNT [smartreader] T1 Resync command error, trying to reactivate!
    2017/01/18 10:18:15 693C8C37 r (reader) CNT [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 39 30 20 4D 65 72 51 32 48 32
    2017/01/18 10:18:15 693C8C37 r (reader) CNT [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
    2017/01/18 10:18:15 693C8C37 r (reader) CNT [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
    2017/01/18 10:18:15 693C8C37 r (reader) CNT [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
    2017/01/18 10:18:16 693C8C37 r (reader) CNT [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
    2017/01/18 10:18:16 693C8C37 r (reader) CNT [smartreader] Card responded ok for ifsd request of 28
    2017/01/18 10:18:16 693C8C37 r (reader) CNT [smartreader] card system not supported
    2017/01/18 10:18:16 693C8C37 r (reader) CNT [smartreader] Normal mode failed, reverting to Deprecated Mode
    2017/01/18 10:18:19 693C8C37 r (reader) CNT [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 39 30 20 4D 65 72 51 32 48 32
    2017/01/18 10:18:19 693C8C37 r (reader) CNT [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
    2017/01/18 10:18:19 693C8C37 r (reader) CNT [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
    2017/01/18 10:18:19 693C8C37 r (reader) CNT [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=1 inv=1 parity=ODD
    2017/01/18 10:18:20 693C8C37 r (reader) CNT [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
    2017/01/18 10:18:21 693C8C37 r (reader) CNT [smartreader] Warning: Card returned error on setting ifsd value to 28
    2017/01/18 10:18:22 693C8C37 r (reader) CNT [smartreader] detect native nagra card
    2017/01/18 10:18:23 693C8C37 r (reader) CNT [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
    2017/01/18 10:18:24 693C8C37 r (reader) CNT [smartreader] T1 Resync command error, trying to reactivate!
    2017/01/18 10:18:28 693C8C37 r (reader) CNT [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 39 30 20 4D 65 72 51 32 48 32
    2017/01/18 10:18:28 693C8C37 r (reader) CNT [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
    2017/01/18 10:18:28 693C8C37 r (reader) CNT [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
    2017/01/18 10:18:28 693C8C37 r (reader) CNT [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
    2017/01/18 10:18:29 693C8C37 r (reader) CNT [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
    2017/01/18 10:18:29 693C8C37 r (reader) CNT [smartreader] Card responded ok for ifsd request of 28
    2017/01/18 10:18:31 693C8C37 r (reader) CNT [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
    2017/01/18 10:18:32 693C8C37 r (reader) CNT [smartreader] T1 Resync command error, trying to reactivate!
    2017/01/18 10:18:36 693C8C37 r (reader) CNT [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 39 30 20 4D 65 72 51 32 48 32
    2017/01/18 10:18:36 693C8C37 r (reader) CNT [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
    2017/01/18 10:18:36 693C8C37 r (reader) CNT [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
    2017/01/18 10:18:36 693C8C37 r (reader) CNT [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
    2017/01/18 10:18:36 693C8C37 r (reader) CNT [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
    2017/01/18 10:18:36 693C8C37 r (reader) CNT [smartreader] Card responded ok for ifsd request of 28
    2017/01/18 10:18:36 693C8C37 r (reader) CNT [smartreader] card system not supported
    2017/01/18 10:18:36 693C8C37 r (reader) CNT [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
    2017/01/18 10:18:36 693C8C37 r (reader) CNT [smartreader] card initializing error

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login