Changeset 11438 with Emu 777
[add] PowerVu hash mode 21 and 22 [add] Basic support for BISS 2* [fix] Small optimizations and improvements *BISS 2 support is limited to ecm and emm detection only. Nothing more at the moment! |
Changeset 11438 with Emu 777
[add] PowerVu hash mode 21 and 22 [add] Basic support for BISS 2* [fix] Small optimizations and improvements *BISS 2 support is limited to ecm and emm detection only. Nothing more at the moment! |
Changeset 11439 with emu 777
Enables Nagra Merlin (CAK7) reader by default Corresponding keys are now configurable via WebIf and config files Tnx DaMulda? for providing this patch! |
Changeset 11439 with emu 778
-[add] PowerVu hash mode 23 and 24
-[fix] Small optimizations and improvements
Changeset 11439 with emu 779
[add] PowerVu hash mode 25 |
Changeset 11440 with emu 779
[nagra merlin]
- fix some compiler errors and warnings introduced r11429
- patch provided by @DaMulda
Changeset 11441 with emu 780
[add] PowerVu hash mode 26 [fix] PowerVu channels with missing audio or video streams [fix] Small optimizations and improvements All PowerVu channels should now work WITHOUT the need of a separate Emu reader with cacheex enabled. Should also fix most, if not all, channels with missing or not descrambled audio streams. |
Changeset 11442 with emu 781
[add] PowerVu hash mode 27 [fix] Small optimizations and improvements |
Changeset 11443 with emu 781
[gbx] - fix parameter 'gbox_reshare' show peer-id & online stat in webif reader code clear up |
Changeset 11444 with emu 782
[fix] PowerVu channels with non working audio streams [fix] Irdeto cw checksum bytes were not correct The rest of the PowerVu channels with non working audio streams should now work correctly |
Changeset 11445 with emu 782
- add tandberg to 'get cardsysten' in oscam.simples.c - add #include <sys/sysmacros.h> to globals.h |
Changeset 11445 with emu 783
[add] Support for Compel encryption via the Stream Relay [fix] Small optimizations and improvements Users who already use the Stream Relay for PowerVu, need to add the "0E00" caid in the new Stream Relay setting. Refer to the wiki for information on how to setup the Stream Relay for Compel and PowerVu |
Enabling Stream Relay
To enable the Stream Relay you have to:
Select 1 - enabled in the Config -> Stream Relay -> Mode option.
Set the proper Caid for the channels you want to enable the Stream Relay for.
For PowerVu channels, caid is 0E00. Compel channels don't have an actual caid, so the OSCam-Emu's free-to-air FFFE caid is used. For Rosscrypt1 channels the caid is A101. Multiple caid values, separated with commas are accepted. For example, setting caid to 0E00,FFFE will enable the Stream Relay for PowerVu and Compel channels.
Creating a modified channel list
Stream Relay needs a modified channel list. First step is to get the streaming url for the channel you want to watch:
Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
Download and save the .m3u file
Open the .m3u file with a text editor and get the stream link. It looks like this:
Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1. It should look like this:
After preparing the new stream link, you need to create a new channel in your user bouquet and add the url. For example, when using DreamBoxEdit, this can be done like this:
Go to the list in the middle "Bouquet details".
Right click and select "IPTV and other streaming services" and then select "Add".
Select "DVB/TS" as the service type.
Write a name for the channel and add the new stream link as URL you prepared above.
Set Service Type to "1" (SD) or "25" (HD) and enter the Service ID of the original channel. You can find it in the left list ("Services") or through the WebIf.
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link. Instead, use dummy values like Transponder ID: "11", Network ID: "22" and Namespace: "33".
Changeset 11446 with emu 783
[gbx] - Speed up local card status detection and report cards to peers |
Changeset 11448 with emu 783
better solution streamid thnx Nautilus7 |
Changeset 11451 with emu 784
fix for last commit ... [fix] Better stream type detection for PowerVu channels This is probably the last fix regarding the stream type detection. The identification of each stream type (video, audio, subtitle) is now based on the "descriptors" included in the PMT (when this is necessary) and not only on the "Stream_type". If you still have some channels that don't have audio or video, or some audio stream are not working, it is almost certain that it is not the OSCam-Emu's fault. In anyway, it won't harm if you post an issue in the github. |
Changeset 11460 with emu 784
Changeset 11457 part 2 for ORF AU fix -add CAID 0D96 -add on/off switch thnx to pehedima Changeset 11458 fix 1x fallthrough / break videoguard2 cleanup Changeset 11459 fix typo missing ; Changeset 11460 code cleanup and fix for *** Standard cards thnx to KD (de-board) |
Changeset 11462 with emu 784
Changeset 11461 another cleanup patch thnx optimum power Changeset 11462 fix last commit |
Changeset 11462 with emu 785
[add] RossCrypt1 support via the Stream Relay* [fix] Some PowerVu channels were missing audio when recording [fix] Allow more PowerVu channels to be watched or recorded simultaneously** *Refer to the wiki for information on how to configure the Stream Relay. **This is done by not descrambling the subtitles on the PowerVu channels. The subtitles are always(?) un-encrypted, so this should not be a problem. If you come across a PowerVu channel with scrambled subtitles, please report. |
Changeset 11463 with emu 785
Changeset 11463 part1 cleanup and fixes for gcc 8.2 Emu 785 [add] RossCrypt1 support via the Stream Relay* [fix] Some PowerVu channels were missing audio when recording [fix] Allow more PowerVu channels to be watched or recorded simultaneously** *Refer to the wiki for information on how to configure the Stream Relay. **This is done by not descrambling the subtitles on the PowerVu channels. The subtitles are always(?) un-encrypted, so this should not be a problem. If you come across a PowerVu channel with scrambled subtitles, please report. |
Don’t have an account yet? Register yourself now and be a part of our community!