Octagon SF4008 and PowerVu.

  • NO!!!!!

  • Yes somehow it was working for me without streaming relay. But all I wanted to get Sport24 working. Since that didn't happen I didn't use the box for months now. But I noticed Octagon have released new drivers to fix some audio issue. In few days im going to give it a try again using the new drivers to see Sport24 working or not.

  • Good going Maxy1 hope you get it. I'm in N.A. so don't get that sat. I don't know if your backup image if you could send to me. Would work on other sats anyhow. I've messed w/ OpenATV/Openeight/etc just not getting the PowerVu are Biss key input software to FTP to the boc Octagon SF4008

  • Yes somehow it was working for me without streaming relay. But all I wanted to get Sport24 working. Since that didn't happen I didn't use the box for months now. But I noticed Octagon have released new drivers to fix some audio issue. In few days im going to give it a try again using the new drivers to see Sport24 working or not.

    Please give more details.


    Which image are you using ?


    Which drivers are you using ?


    Which version of Oscam or Ncam are you using ?


    Please post your configs.


    Others are trying to repeat even limited success to no avail so this information would be very helpful.

  • I have heard that wicardd-armv7a-eabihf version 1.19 beelive will work... anyone have try it and got it to work?


    Heard it WORKS using wizardd-armv7 on AFN... anyone can confirm? anyone have a wizardd.config for it?

  • if it will work in one cam,it will work in any cam (total fixing in drivers).

  • I use WinSCP for (FTP) edit the keys, Ncam 1.1 & OpenATV 6.0

    Also downloaded Notepad + for editing softcam because windows notepad and wordpad sometimes screws up.

    Ncam gotta pick correct architecture i know it was ipk extension so arm architecture but also have different arm so gotta choose correct compile think it was arm7.

    For the dreambox would be mips architecture same with oscam gotta choose correct or compile from source on linux pc

  • I use WinSCP for (FTP) edit the keys, Ncam 1.1 & OpenATV 6.0

    Also downloaded Notepad + for editing softcam because windows notepad and wordpad sometimes screws up.

    Ncam gotta pick correct architecture i know it was ipk extension so arm architecture but also have different arm so gotta choose correct compile think it was arm7.

    For the dreambox would be mips architecture same with oscam gotta choose correct or compile from source on linux pc

    So did you get it to work using Ncam 1.1 ?

  • I use WinSCP for (FTP) edit the keys, Ncam 1.1 & OpenATV 6.0

    Also downloaded Notepad + for editing softcam because windows notepad and wordpad sometimes screws up.

    Ncam gotta pick correct architecture i know it was ipk extension so arm architecture but also have different arm so gotta choose correct compile think it was arm7.

    For the dreambox would be mips architecture same with oscam gotta choose correct or compile from source on linux pc

    So did you get it to work using Ncam 1.1 ?

    I already posted that I have it working with Ncam 1.1 & OpenATV 6.0


    Here is a example how things get entered SID, Video PID , CW's for Fox Channel on 95.0W

    F 00010020 00 823BFAB7116C4DCA ;FOX 95.0°W
    F 00010020 01 823BFAB7116C4DCA ;FOX 95.0°W



    F is for Biss 0001 is your SID, 0020 is Video PID 00 Line, then your 16 Biss Numbers also have to have the ; added

    F is for Biss 0001 is your SID, 0020 is Video PID 01 Line, then your 16 Biss Numbers also have to have the ; added


    You don't need the FOX 95.0W added for it to work that is just for showing me which channel it is.

  • Thanks

  • please help, sf4008 can support power vu des? channel on apstar7 disney jr, or intelsat 19 animal planet southeast asia, or asiasat 5 cartoon networ, because my another arm receiver like sf4008 , zgemma h7s, can open power vu des channel, thx