VIASAT 0940 Card Not Working ?

There are 43 replies in this Thread which was already clicked 11,050 times. The last Post () by johndeere88.

    Hi.


    Have a problem, but let me start by saying :


    Had a Viasat 093E card working on same config o month ago, but they cancelled the card and sent me a new one, number starting with 0170..... ( 0940 )


    So.


    A working Configuration with 093E card, not working with 0940 card ? ( YES! The card is paired with an SD box. )


    Any ideas why this is not working anymore ? What do i need to change ?


    I keep getting "No Entitlements" - But the card works in the box and i have picture! ( Works in both SD box and VUSolo2 )


    Only change i have made is the line CARD ID : Changed this line to 0940 instead of 093E.


    I have also tried setting all CARD ID at the same time... No Progress there...


    I am greatful for any help.:)


    NOTE!


    IT WORKED FINE WITH 093E card - Same config. So no issues there... 8)

    I thought you would come forward, the master of the forum...


    However... The boxkey is the same as the old box key, as i paired the new card with the same box.... :(


    So i do nor think that is going to help, i get the same Box key if i try again. It is double checked it is written correct...


    Any ideas on the new card ? 0940 should be correct ? Right ?


    And the card is paired with the old SD box, and that is serial is converted...

    You dont say what box you are testing it in, but if it's a dm900 you need to overclock it to get it to initialize correctly, dont worry, the card can take it :)


    this is my setup..


    protocol = internal

    device = /dev/sci0

    autospeed = 0

    caid = 0940

    boxid = xxxxxxxxxx

    detect = cd

    mhz = 675

    cardmhz = 2700

    ident = 0940:000000



    /Spawn

    I run my 0940 card in my Synology DS216 NAS storage with cardreader, works like a charm. Try update card in sd box to get entitlements. My card is paired with vias@t cam


    [reader]


    label = pcsc1
    description = pcsc reader

    protocol = pcsc

    device = 0

    services = viasat_0940

    localcards = 0940:000000

    caid = 0940

    boxid = xxxxxxxx

    ins7e11 = 15

    fix07 = 0

    ecmwhitelist = 0940:A7,85,93,88,84,AA,98,89,95,B7

    detect = cd

    ident = 0940:000000

    group = 1

    blockemm-unknown = 1

    saveemm-u = 1

    auprovid = 000940


    Autospeed is checked or try set both (Mhz and Card Mhz) 357 Mhz


    Br

    Hex

    Hi,

    Quote from hexman

    I run my 0940 card in my Synology DS216 NAS storage with cardreader, works like a charm. Try update card in sd box to get entitlements. My card is paired with vias@t cam


    [


    You say this works with HD channels aswell hexman ?

    SD channels are switched off now by Vi@s@t about a week ago. But there is a good news - in the Ncam7.1 the 0940 provider HD channels working fine also others working. ECMs ok ~100ms - it's fast card! Even showing cards entitlements! But when I've tested even the latest OSCAM I cannot get a "CARDOK" also it does not showing a cards entitlements.

    I know it - in both emus -OScam/Ncam config is the same and correct boxid is written. Even my old DM500S clone box with a right configured OSCAM worked fine and stable with a new Vi@s@t 0940 card for some months until they switched off SD (about a week ago switched off in my region....). But problem was that OScam does not showed cards entitlements also on DM500S but the card and AU worked and decrypted the channels without freezes on server and client/peers sides. On client side also HD worked in

    HD tuner box. ;) Now I migrate server side to DM800 HDSE and 0940 card works fine with a Ncam 7.1 Emu, shows entitlements (I hope that autoupdate works too) and seems to be stable, but with an OScam it with the same config files does not shows cards entitlements. But it's nothing wrong - I can run Ncam server and it's good enough at this time...

    • Official Post
    Quote from duets

    SD channels are switched off now by Vi@s@t about a week ago. But there is a good news - in the Ncam7.1 the 0940 provider HD channels working fine also others working. ECMs ok ~100ms - it's fast card! Even showing cards entitlements! But when I've tested even the latest OSCAM I cannot get a "CARDOK" also it does not showing a cards entitlements.

    So you are claiming that Viasat HD channels are working with only box ID in Ncam?


    Jeg antar du snakker noen av de Nordiske språken etter som du bruker 0940 kort. Vi har en Nordisk sektion her på forumet.

    Men det du sier er at du får Viasat HD knaler til og virke med bare Box ID i Ncam?

    In my configuration it's working without freezes:

    2018-12-02 17:12:06 7867B42C c (ecm) vuplus23 (0940@000000/02F7/27C4/B7:2xx72750ACF91ADA72BC8CCxxxxxxxxx:0F0xx00000000000:Viasat-Nationa Geograhic HD): found (101 ms) by V--------0940 (L/1/4/4)

    Quote from duets

    In my configuration it's working without freezes:

    2018-12-02 17:12:06 7867B42C c (ecm) vuplus23 (0940@000000/02F7/27C4/B7:2xx72750ACF91ADA72BC8CCxxxxxxxxx:0F0xx00000000000:Viasat-Nationa Geograhic HD): found (101 ms) by V--------0940 (L/1/4/4)


    Det er jo litt nice, hva er forskjell på ncam og oscam? det skal jo egentlig være samme greiern.

    Du har ikke linka kortet mot en CI+ cam fra via...? jeg vet dette funket for noen kort en periode. Bruker du bare boxid eller?

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login