a big thank you for this post has sorted me out:D
does the autoroll work for discovery chanels on that sat?
thnx
a big thank you for this post has sorted me out:D
does the autoroll work for discovery chanels on that sat?
thnx
After few times spent and games with AU on zero 4k finally works :)
Im succesfully clear one channel and from them get correct keys for all SIS Live...
then only need to copy paste finded keys to SoftCam.key and then all SIS package and channels work's! :)
Hi Maximus66,
As a fellow Vu+ owner (Solo 4K and Zero), can you please confirm this is your setup? I am finding it difficult to find best setup for Vu+.
Vu+ Zero 4K
OpenATV 6.2
Oscam emu - which version?
oscam config files (oscam.conf, oscam.server, oscam.user) from #43 - what about oscam.config??
SoftCam.Key from #40
Thanks!!
For me
"oscam config files (oscam.conf, oscam.server, oscam.user) from #43 - what about oscam.config??
SoftCam.Key from #40" all the SIS channels AU once one AUs no manual intervention needed...Interestingly I hate horse racing:D
Thanks! Those config files along with the oscam on Vu+ Zero worked fine.
I very thank you for the guide on this post , I managed to get autoroll working on sat 58W in my dreambox DM 900 UHD clone
my dream box dm 900 uhd .i am using powersat image. oscam 11424 latest one .auto rolling powervu is not working plaz help me.i satellite power is working. latest powervu version is not working
idea2 bare in mind that depending on the service it may take a long time.... right now I've to leave a channel in 9E open for 15 minutes with no image to get AU. Also check the thread I started (Oscam-Emu (Linux x86_64) issues with AFN) for a working oscam-emu config
Thanks for this post...
I was able to get AFN au working!!!
It is possible do the same process with Discovery Power Vu channel´s ?
Thanks!!!
Display MoreHere's it special for you, my SoftCam.Key for SIS live channels ...
delete youre SoftCam.Key from youre usr/keys and copy-paste this mine, restart gui..
Start oscam and leave it on any SIS Live channel.. make sure that you have this in youre log file..
Dont change channel and the picture comes in a few minutes (this takes about 5-15 minutes) over AU ...
Good luck...
Can you please validate this:
- With a softcam.key like yours on this post,
- Oscam.conf, Oscam.server and Oscam.user adjusted to au AFN
Should i get au on SIS channel´s?
Thanks!!
Edit:
I tested what i ask before and yes SIS Update works fine with Oscam.conf, Oscam.server and Oscam.user adjusted to au AFN!!!
But Au on Discovery channel´s did not work...
I get this log:
My questions are:
- Should Au work on Discovery?
- If yes what i am doing wrong?
Thanks!!
AU works on Discovery and SIS and keys updated but no sound and image. just AFN is ok. how fix this problem? any changes need to oscam conf files?
AU works on Discovery and SIS and keys updated but no sound and image. just AFN is ok. how fix this problem? any changes need to oscam conf files?
Ok... my Discovery problem was time.... i needed to give more time to oscam find the keys...
Linuxxxx in my Dm900UHD with last oscamEmu version: Afn, Sis and Discovery auto update works with image and sound
Can you post your configuration,i have Dm900 too,thx?
AU works on Discovery and SIS and keys updated but no sound and image. just AFN is ok. how fix this problem? any changes need to oscam conf files?
Ok... my Discovery problem was time.... i needed to give more time to oscam find the keys...
Linuxxxx in my Dm900UHD with last oscamEmu version: Afn, Sis and Discovery auto update works with image and sound
@naja please post your OSCAM config files so we can also use it.
Thanks.
Can you post your configuration,i have Dm900 too,thx?
Display MoreAU works on Discovery and SIS and keys updated but no sound and image. just AFN is ok. how fix this problem? any changes need to oscam conf files?
Ok... my Discovery problem was time.... i needed to give more time to oscam find the keys...
Linuxxxx in my Dm900UHD with last oscamEmu version: Afn, Sis and Discovery auto update works with image and sound
@naja please post your OSCAM config files so we can also use it.
Thanks.
Try add this:
Conf
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
Server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
[reader]
label = constant.cw
protocol = constcw
device = /usr/keys/constant.cw
services = !afn
caid = 2600
group = 1
[reader]
label = AFN
protocol = emu
device = Emulator
services = afn
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
User
[account]
user=dvbapiau
monlevel= 4
au= 1
group = 1,2,3,4,5,6,7,8,9,10
Hello @maximus66. I have configured my OSCAM exactly with the config you provided. I don't understand the usage of 2 emulator readers. Can you please explain use of emulator labeled as AFN? Moreover there are few channels which are been decrypted by AFN reader and on those channels i am not getting audio. I am getting the EMM SEND in my log but autoroll is not working. May be the EMM key is not correct. Will try to get a valid EMM and revert. Thanks in advance
Even this one needs it:
services
[afn]
caid = 0E00
provid = 000000
srvid = 0066,0067,0068,0069,006A,006B,006C,006D
and it was left out:
Server
[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
...
But now because the new encoding does not open the AFN.
afn down may be new cam fix so have to wait
Oh... good to know it isn't just me!
Hello.....the auto roll function is working fine now.
I very thank you for the guide on this post , I managed to get autoroll working on sat 58W in my dreambox DM 900 UHD clone
hello friend can you share the softcam.key that you use for the 58w thanks
Don’t have an account yet? Register yourself now and be a part of our community!