Hi
Just flashed my receiver with ATV 6 & got this message -> " Please consider updating your rescue loader! "
Anyone know the fix for this please?
Receiver is with Sim 2.3
cheers
Hi
Just flashed my receiver with ATV 6 & got this message -> " Please consider updating your rescue loader! "
Anyone know the fix for this please?
Receiver is with Sim 2.3
cheers
Try this in telnet update-rescue -v
Remember this is a clone, so be careful when updating with any official firmware / software.
Display MoreHi
Just flashed my receiver with ATV 6 & got this message -> " Please consider updating your rescue loader! "
Anyone know the fix for this please?
Receiver is with Sim 2.3
cheers
Hi how has solved a problem?
Try this in telnet update-rescue -v
Remember this is a clone, so be careful when updating with any official firmware / software.
just flashed a newer image & have again tried to update the rescue loader with the above command & im getting this in telnet
any suggestions please mate?
dm520 login: root
root@dm520:~# update-rescue -v
Warning: Could not read CA!
Warning: Please consider updating your rescue loader!
[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm520/release/rescue-image-dm520.bin.sig'
[*] Downloading 'http://dreamboxupdate.com/download/recovery/dm520/release/rescue-image-dm520.bin'
[*] Verifying signature of 'rescue-image-dm520.bin'
/usr/sbin/update-rescue: line 38: gpgv: not found
Fatal: Failed to verify signature
Do anyone know how to update Rescue loaderof DM520
Still waiting answer how to update rescue loader
When i update image via browser i got this msg
Warning: Please consider updating your rescue loader!
Current loader is 101
Thanks
Put the box into Rescue mode then open telnet/ssh session and type:
wget https://www.dreamboxupdate.com/opendreambox/2.5/unstable/images/dm520/vmlinux.gz-rescue-3.4-r1-dm520-20200227.bin
flash-rescue vmlinux.gz-rescue-3.4-r1-dm520-20200227.bin
When the image loads update the rescue loader in telnet/ssh:
Now you should be able to flash a new image of choice.
root@dm520:~# flash-rescue vmlinux.gz-rescue-3.4-r1-dm520-20200227.bin
Fatal: Cannot access '/root/vmlinux.gz-rescue-3.4-r1-dm520-20200227.bin'
root@dm520:~#
root@dm520:~# apt-get update && update-rescue -v
-sh: apt-get: not found
error
You need to do this is rescue mode, not when you booted an image...
Emo
You need to do this is rescue mode, not when you booted an image...
Emo
Ifcus iam doing on rescue mode all this
One thing my dm520 is original not clone
😕😕
Rescue firmware can be found here ~ https://www.dreamboxupdate.com/
Try a different rescue loader.
Alter the commands accordingly.
Rescue firmware can be found here ~ https://www.dreamboxupdate.com/
Try a different rescue loader.
Alter the commands accordingly.
I try this all but now bootloader show 102
Can you tell me which one image show bootloader 103
If I am not wrong latest bootloader for DM52xHD is 102. The 103 is for DM9x0UHD.
Emo
Don’t have an account yet? Register yourself now and be a part of our community!