hello cazuela
where to buy bbs tool
thanks alot
hello cazuela
where to buy bbs tool
thanks alot
any body know where to buy bbs tool thanks
I have a problems
I seek and I find no model jtag vu +
:83:I search on google and find many models, but none is like jtag image from thread "+ VU Broadcom JTAG Tools"
more, is possible build it.?
Please jtag has a name.? :02:
knowing the name is easier to find jtag
do not get angry please.
someone please help me.
When it is possible to be made public ,it will be..
please stop sending me PMs asking where it can be found.
in the meanwhile... patience is a virtue...
When it is possible to be made public ,it will be..
please stop sending me PMs asking where it can be found.
in the meanwhile... patience is a virtue...
I can't wait.... ;)
I hope it will be soon.
Thanks for the Broadcom Tools description.
Great.
This is what I have so far...
BBS pinout
1 is 3v3
2 is BSC_SCL
3 is BCS_SDA
4 is GND
in the code it looks for
vendor 0x0A5C (broadcom) , id = 0xB12C (Broadcom I2C)
or
%VID_04b4&PID_8613.DeviceDesc%=Broadcom, USB\VID_04b4&PID_8613
%VID_0a5c&PID_b12c.DeviceDesc%=CYUSB, USB\VID_0a5c&PID_b12c
It seems the device is just a
Cypress CY7C68013A EZ-USB FX2LP USB2.0 Developement Develope Board Module
Cypress CY7C68013A EZ-USB FX2LP USB2.0 Developement Develope Board Module | eBay
It's working (software detects the interface and the SCL SDA are toggling checked with a scope)
but no reply from our target (not a Vu box), so BBS and the JTAG seem disabled on our target.
Mick
Hi Mike,
QuoteIt's working (software detects the interface and the SCL SDA are toggling checked with a scope)
but no reply from our target (not a Vu box), so BBS and the JTAG seem disabled on our target.
Mick
I did some testing myself and i get no responce at all from the VU+ Duo.
Try'd different homebrew i2C and JTAG adapters and programs. Nothing...
Does anyone know if the BCM7335 chip has a build in IP address?
The Network interface is activated and still working.
iq2bad
VU+ JTag Broadcom Tools
How to install After extracting the compressed file that is installer in the follow order.
BBS
1. Install Framework 4
2. Install BroadCom Studio3
3. Install BCM97325 [ Do not use setup install file ] [ VU+ SOLO ]
4. Install BCM97335 [ Do not use setup install file ] [ VU+ DUO ]
5. Install BCM97413 [ Do not use setup install file ] [ VU+ UNO/ULTIMO ]
6. Bcm USB [ Use USB Driver update ]
How to run
1. Broadband Studio 3 runs
2. Select Menu => View => devices => BCM97325 [ VU+ SOLO ]
3. Select Menu => View => devices => BCM97335 [ VU+ DUO ]
4. Select Menu => View => devices => BCM97413 [ VU+ UNO/ULTIMO ]
3. After turning on the STB, you can see the message 'Connected'
4. Select Flash Explorer
5. Select the Type ' K9F1G08U0A '
6. Select refresh
7. Select the update file in Browser
8. Select start
How to connect BBS
Connect the BBS as shown below
1. VU+ DUO
2. VU+ SOLO
3. VU+ UNO
4. VU+ ULTIMO
Bcm97325.zip
Bcm97335.zip
Bcm97413.zip
cfe_Duo.zip
cfe_Solo.zip
cfe_Ultimo.zip
cfe_Uno.zip
how to use BBS - SOLO_UNO_DUO_ULTIMO.pdf
thanx TRR
I also searched the entire web to find exact model of the jtag used. Unfortunately no exact match.
The closest I found is this One thing I'm pretty sure is that the core of BBS tool is Cypress FX2 USB 2.0 chip.
Otherwise the procedure described here is USELESS unless you have the exact jtag.
It's just like reading recipe cook book without actually eating.
So I sincerely hope that the author and starter of all this CASUELA, will take a pity on us and give us exact details we need to know.
I also searched the entire web to find exact model of the jtag used. Unfortunately no exact match.
The closest I found is this One thing I'm pretty sure is that the core of BBS tool is Cypress FX2 USB 2.0 chip.
The link lead to a USB to JTAG adapter.
I think we talking about a USB to I2C apdapter here.
On the other hand I think it should be possible to connect the VU+ in coma to a working VU+ using a crossover I2C cable. By using special software on the working VU+ it could be possible to connect to the VU+ in COMA through the I2C connection.
I am working on something like that but I have only a VU+ in coma :(
Iq2bad
Can anyone tell me how long it will take before that I can buy it????
There are photos, so some one is testing....and there is at least one divice.
I need one desperately....
ThanX: ExtremeDream.
I understand you are desperate to get your receiver fixed mate but at this time nobody knows where to purchase, as soon as we do know it will be posted here. Until then i think google is our best friend.
I hope it will not take long...
Nothing else to find on google.
Display MoreI also searched the entire web to find exact model of the jtag used. Unfortunately no exact match.
The closest I found is this One thing I'm pretty sure is that the core of BBS tool is Cypress FX2 USB 2.0 chip.
Otherwise the procedure described here is USELESS unless you have the exact jtag.
It's just like reading recipe cook book without actually eating.
So I sincerely hope that the author and starter of all this CASUELA, will take a pity on us and give us exact details we need to know.
You wont be able to buy the exact board, unless you buy it from broadcom. If you zoom in on the pictures you will see the broadcom logo on the back of the PCB on one of the chips.
It just seems to be a generic FX2LP USB2.0 chip. If you program the board with the PID / VID I supplied, it will be recognised by the software, and it will download the firmware into it.
When we tried to connect, we noticed the SDA, SCK lines working with our scope, but JTAG and BBS seems disabled on our box which isn't a VU box.
Mick
Hi Mick
Can you explain in detail what are the connections from vu plus duo 2 generic FX2LP USB2.0 chip tnx in advance.
this is how when a Company do not give information to costumers. Vu+ knows what the Jtag is, but they supplie only the dealers with this. End costumer have to wait or send the bad boxes back to dealer and wait for repair
Bad ways to make us happy.
Hi, mick, what are the SDA and SCL pins I / O of the Cypress EZ-USB FX2LP CY7C68013A USB2.0 Board Module Developement develope?
Thanks
Hello
I can confirm this method whith the cypress board from ebay works
My vu+ DUo is working after this method.
Installed broadcom studio on a windows xp machine removed jumper from cypress board and al went well
Thanks
Gr
Albert
Display MoreHello
I can confirm this method whith the cypress board from ebay works
My vu+ DUo is working after this method.
Installed broadcom studio on a windows xp machine removed jumper from cypress board and al went well
Thanks
Gr
Albert
Thanks for the information .now can you do yourself a favour and passby INTRODUCTIONS which is normal procedure !!
Display MoreHello
I can confirm this method whith the cypress board from ebay works
My vu+ DUo is working after this method.
Installed broadcom studio on a windows xp machine removed jumper from cypress board and al went well
Thanks
Gr
Albert
Can you supply a link to this board on *Bay
EDIT: just found the link derr (should read more me thinks) lol
Don’t have an account yet? Register yourself now and be a part of our community!