TRUMAN TM-PREMIER 1 PLUS BOOT PROBLEM

Put the spark folder and everything in it into an empty flash that contains nothing but the spark folder


Turn off the device from the back, then place the flash drive into the receiver's USB port

Press the power button (standby) on the interface and hold down for five seconds, then open the device from the back without leaving the power button (standby) until you see [Forc] in the interface, let the power button (standby)

Then press the right button in the interface (V +), you will see [U LD]

Press the standby button on the interface and be patient
[attach=163937][/attach]
If the download is successful, you will see in the interface [SUCC]

Now update the software to the latest version, and congratulations to you

The last version

spark7111_truman_1.2.58_app


The next time, turn off the device first with a remote, then from the back because the device works like a computer. Turning it off directly from the back causes it to lose some files, so it cannot boot

### for GM990Reloaded ###################################
ac off
ac on + hold menu-button
now you can press in your terminalprogram "3"-exit 
and you are on prompt:
mb618>
#########################################################
### fix args by comcable ################################
#########################################################
setenv ethaddr '00:80:E1:12:06:38'
setenv bootdelay 3
setenv baudrate 115200
setenv board mb618
setenv monitor_base '0xA0000000'
setenv monitor_len '0x00080000'
setenv monitor_sec '0xa0000000    0xa007ffff'
setenv load_addr '0x80000000'
setenv unprot 'protect off $monitor_sec'
setenv update 'protect off $monitor_sec;erase $monitor_sec;cp.b $load_addr $monitor_base $monitor_len;protect on $monitor_sec'
setenv HOSTNAME LINUX7109
setenv ipaddr '192.168.40.63'
setenv netmask '255.255.255.0'
setenv gatewayip '192.168.3.1'
setenv serverip '192.168.40.19'
setenv kernel_base_spark '0xa0080000 '
setenv kernel_base_enigma2 '0x18000000'
setenv kernel_sec 'a0080000 a077ffff '
setenv kernel_len '0x00700000'
setenv update_kernel 'protect off  a0080000 a077ffff ;erase  a0080000 a077ffff ;cp.b 0x80000000 0xa0080000  0x00700000 ;protect on  a0080000 a077ffff '
setenv rootfs_base '0xa0800000'
setenv rootfs_sec 'a0800000 a1ffffff'
setenv menucmd update
setenv tftp_kernel_name_spark mImage
setenv tftp_kernel_name_enigma2 uImage
setenv tftp_userfs_name_spark 'userfsub.img'
setenv tftp_userfs_name_enigma2 'e2jffs2.img'
setenv kernel_name_spark 'spark/mImage'
setenv kernel_name_enigma2 'enigma2/uImage'
setenv userfs_name_spark 'spark/userfsub.img'
setenv userfs_name_enigma2 'enigma2/e2jffs2.img'
setenv userfs_base_spark 800000
setenv userfs_base_enigma2 18800000
setenv userfs_len_spark 17800000
setenv userfs_len_enigma2 7700000
setenv kernelnfspath '192.168.40.19:/opt/target'
setenv rootfs_name UserFS
setenv rootfsnfspath '192.168.40.19:/home/d22cj/workspace/target'
setenv uboot_name 'u-boot.bin'
setenv ubootnfspath '192.168.40.19:/home/d22cj/workspace/target'
setenv bootfromnfs 'nfs a4000000 $kernelnfspath/$kernel_name;bootm a4000000'

setenv bootargs_nfs 'console=ttyAS1,115200 nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:61 stmmaceth=msglvl:0,phyaddr:1:watchdog:5000 root=/dev/nfs nfsroot=192.168.40.19:/opt/target,nfsvers=2,rsize=4096,wsize=8192,tcp rw ip=192.168.40.61:192.168.40.19:192.168.3.1:255.255.0.0:LINUX7109:eth0:off bigphysarea=4000'

setenv bootargs_flash 'console=ttyAS1,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:69 ip=192.168.0.69:192.168.3.119:192.168.3.1:255.255.0.0:lh:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=4000'

setenv bootargs_spark 'console=ttyAS1,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:69 ip=192.168.0.69:192.168.3.119:192.168.3.1:255.255.0.0:lh:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=4000'

setenv magic_version '1.7'
setenv filesize '203CA88'
setenv fuseburned true
setenv stdin serial
setenv stdout serial
setenv stderr serial

setenv bootargs_enigma2 'console=ttyAS0,115200 root=/dev/mtdblock6 rootfstype=jffs2 rw init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:69 rw ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:LINUX7109:eth0:off bigphysarea=6000 stmmaceth=msglvl:0,phyaddr:2,watchdog:5000'

setenv bootargs 'console=ttyAS0,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:69 ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:lh:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=4000'

setenv bootcmd bootm  '0xa0080000'
setenv boot_system spark
setenv userfs_base '800000'
setenv userfs_len '17800000'
setenv kernel_base '0xa0080000 '
setenv kernel_name 'spark/mImage'
setenv userfs_name 'spark/userfsub.img'
setenv tftp_kernel_name mImage
setenv tftp_userfs_name 'userfsub.img'

### before doing saveenv check via "print" if all correct!!! ####
saveenv

#############################################
### end #####################################

now you turn ac off
ac on and orig should bootup again
if orig not booting you must flash rescue-pack1.2.09 again