OpenVPN Setup guide for most VPN,s and scripts

  • Beta Enigma2 VPN Script


    Hi Ive been playing around with VPN,s and got a basic script to configure Nord, IP Vanish and Digibit


    The following script should download the configs for your VPN to HDD/VPN name then you use VPN changer to switch servers, VPN,s added so far:


    Nord VPN

    IP Vanish

    Digibit

    Pure VPN


    Simply copy this command and past in notepad and edit line one and two

    Code:

    Code
    1. USERNAME='UUUU'
    2. PASSWORD='PPPP'
    3. ###############################################################
    4. # Standard Config
    5. # If you change anything below this line, it probably wont # be able to connect to your VPN.
    6. ################################################################
    7. #!/bin/bash
    8. # Config Example
    9. wget -O VPN.sh https://raw.githubusercontent.com/davesayers2014/OpenVPN/master/Main%20Scripts/VPN.sh && sed -i "s/UUUU/$USERNAME/g" VPN.sh && sed -i "s/PPPP/$PASSWORD/g" VPN.sh && chmod +x VPN.sh && ./VPN.sh


    Change UUUU with your username between ' '


    Example: 'dsayers'


    Change PPPP with your password between ' '


    Example: '12ght'


    Copy and paste the script in putty and hit enter you should now have the option for what VPn you want to use:


    1) Nord VPN

    2) IP Vanish

    3) Digibit

    4) Pure VPN

    5) Quit


    Please login to see this link.


    Choose your option and hit Enter this should then download the configs and once finished it will say OpenVPN Configs downloaded Please Start OpenVPN.


    Please login to see this link.


    You will be asked to enter your choice again but you can ignore this.


    Reboot box and goto plugins, VPN Changer and choose a country.


    Please note due to compression on wget for early versions of OpenATV 6.2 this may not work . If using OpenATV 6.2 please make sure its flashed or updated after 10/03/2018 where they removed compression from wget.

    The post was edited 2 times, last by dsayers ().


  • OpenVPN Setup guide for most VPN,s


    Hi Ive seen a few threads reguarding OpenVPN on enigma2 so I thought I would show a tut of how I setup Digibit and Nord VPN with VPN Changer


    In the first part I will show you how to rename all .ovpn files to .conf and add auth-user-pass/auth-user-pass password.conf you can skip this part if you have already done this. T


    he second step will show you how to copy all conf files into subfolders with one command and add password.conf to each sub folder.

    Feel free to edit auth.txt to user,txt or whatever you prefer.


    On the box create a folder called vpn in hdd

    FTP your config files to hdd/vpn

    1. using Talnet/putty type

    Code:

    Code
    1. cd /hdd/vpn

    This will put putty in hdd/vpn

    2.Now to rename all .ovpn files to .conf

    Type in talnet/putty

    Code:

    Code
    1. # rename .ovpn to .conf
    2. for x in *.ovpn; do mv "$x" "${x%.ovpn}.conf"; done

    3. To add auth-user-pass/auth-user-pass auth.txt to each conf file in talnet/putty paste

    Code:

    Code
    1. # Edit all conf files to have auth-user-pass/auth-user-pass auth.txt
    2. find . -name "*.conf" -exec sed -i "s/auth-user-pass/auth-user-pass auth.txt/g" '{}' \;

    4. Now that is done we can move all configs into subfolders with the same name

    Ensure Talnet is still in hdd/vpn before running this command

    Copy and paste in talnet/putty

    Code:

    Code
    1. # Move all files into sub folders
    2. for file in *; do if [[ -f "$file" ]]; then mkdir "${file%.*}" mv "$file" "${file%.*}" fi
    3. done

    5. Now to add password.conf to each sub folder we need to add auth.txt to tmp with your username and password added.

    Now use the following command to copy auth.txt to each sub folder with this command

    Code:

    Code
    1. # copy auth.txt to each sub folder
    2. find /hdd/vpn -type d -exec cp /tmp/auth.txt {} \;

    Some VPN,s need cert files and other files simply edit the last command (.5) to suit


    VPN Changer is linked below and is pretty simple to use, only issue is with OpenVix pressing red to stop/start OpenVPN just exits the plugin this is due to Key Mapping issue so you will need to goto OpenVPN in network to stop OpenaVPN.


    If you dont want to use VPN Changer and prefer to drag configs just FTP the configs to vpn (create the vpn folder) and change command 1. to cd /vpn and jsut use commands 2. and 3. Add password.conf to etc/conf and you should just be able to drag any conf file from vpn to etc/openvpn


    The post was edited 2 times, last by dsayers ().

  • Guide for setting up OpenVPN with my-private-network on Enigma2


    This Guide is for setting up OpenVPN with my private network if done correctly it should download and install your openvpn configs via a simple script

    Create an account with my private network -Code:

    Code
    1. https://client.my-private-network.co.uk/aff.php?aff=2640

    Please take up on the Free 3-day trial to put the VPN to test


    Putty can be downloaded atCode:

    Code
    1. http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html


    If using a Mac there are instructions at the end of the document for an alternative to Putty


    First open Putty, and in the HostName (or IP address) box enter the enigma2 boxes IP address, and then click the Telnet radio button and click open


    Please login to see this picture.


    And then log in using the word, root


    Please login to see this picture.


    Download the script from here


    Code
    1. https://www.dropbox.com/s/zfimquxeed9vctx/myvn.txt?dl=1


    We only need to edit lines 1 to 3


    Change line 1 uuuu with your username between the " "


    Example USERNAME='davesayers19'


    Change line 2 pppp with your password between the " "


    example PASSWORD='149356d'


    On line 3 change GBR to the country you want the VPN to connect to


    Example COUNTRY='NLD'


    NLD is for Netherlands


    Do not edit anything below line 3 as it may cause errors


    You can change the country you want the VPN server you want to connect to use the 3 letters 3 Letter Code ie GBR for United Kingdom a list of countries here


    Code
    1. https://help.my-private-network.co.uk/support/solutions/articles/8461-which-countries-can-i-connect-to-


    Once you have edited your details copy the script and paste into putty as per example below


    Please login to see this picture.


    And hit enter


    If using OpenATV 6.2 Beta and receive

    "script.sh' saved [620/620]

    -bash: ./script.sh: can not execute binary file: Exec format error"


    This is due to an update in Wget that seems to compress the script please use this script


    Code
    1. https://www.dropbox.com/s/bmu9i612z6eh3ll/wget_1.19.3_VPN.txt?dl=1

    and edit details as above and paste in putty.


    Before starting OpenVPN we can run an IP check script this will tell you if the vpn is working and you can test it when changing servers.


    The script should have downloaded a plugin called IP Checker.


    Goto plugin and you should see IP Checker press ok on the plugin and it should run a simple IP check script


    You should get something like this I have removed part of my IP address


    Please login to see this link.


    Now start openvpn on box


    Please login to see this link.


    After starting openvpn the above should stay green and say running, You can now go back to plugins and start IP Checker and see if the IP Address has changed


    If using Mac


    There is a version of Putty for Mac but is not very good.

    Open Applications ->Utilities ->


    Type the following command telnet 192.168.X.X (change the IP address to the one for the Zgemma/Enigma2 boxes)


    Enter the username root (and password if you have set one) and press enter


    Then follow the instructions above.



    Problem 1,

    When enabling OpenVPN I lose internet connection.


    Possible Solution


    Goto your network settings on box and change DHPC to no then blue button to Edit DNS


    Try Google DNS


    Nameserver 1 8.8.8.8

    Nameserver2 8.8.4.4

  • New beta OpenVPN script generator


    If using a Mac there are instructions at the end of the document for an alternative to Putty


    First open Putty, and in the HostName (or IP address) box enter the enigma2 boxes IP address, and then click the Telnet radio button and click open


    Please login to see this picture.


    And then log in using the word, root


    Please login to see this picture.


    Users can now visit

    Code
    1. http://e2openvpn.com/OpenVPN_Generator/


    Add there username and password this will now generate a script.

    Copy and paste the script in putty and hit enter you should now have the option for what VPN you want to use:


    1) Nord VPN

    2) IP Vanish

    3) Digibit

    4) PureVPN

    5) Quit


    Choose your option and hit Enter this should then download the configs and once finished it will say OpenVPN Configs downloaded Please Start OpenVPN.

    You will be asked to enter your choice again but you can ignore this.

    Reboot box and goto plugins, VPN Changer and choose a country.


    If using Mac


    There is a version of Putty for Mac but is not very good.

    Open Applications ->Utilities ->

    Type the following command telnet 192.168.X.X (change the IP address to the one for the Zgemma/Enigma2 boxes)

    Enter the username root (and password if you have set one) and press enter

    Then follow the instructions above.


    Problem 1,


    When enabling OpenVPN I lose internet connection.

    Possible Solution

    Goto your network settings on box and change DHPC to no then blue button to Edit DNS

    Try Google DNS

    Nameserver 1 8.8.8.8

    Nameserver2 8.8.4.4

    The post was edited 4 times, last by dsayers ().