is "no stream relay" method working in DM800se clone with A8P sim ?
oscam for powervu
- lme
- Thread is marked as Resolved.
-
-
is "no stream relay" method working in DM800se clone with A8P sim ?
yes works fine
-
thx, but i do not see any Thanks icon.
-
Could I get latest powerVu code for 57E? I know EMM key, and can get ECM key and can get CW too, but Can't see the descrambled screen. I don't know why? I'm using Emu r767.. Anybody can give me some tips?
-
is "no stream relay" method working in DM800se clone with A8P sim ?
yes works fine
Is there a procedure for setting up? So far i got the oscam 1440 into the machine.
where is the sofcam.key file goes to?
-
yes you need an active emm
-
is "no stream relay" method working in DM800se clone with A8P sim ?
yes works fine
Is there a procedure for setting up? So far i got the oscam 1440 into the machine.
where is the sofcam.key file goes to?
you need to use either Oscam_emu or ncam for PowerVU keys to work. i use Oscam_emu v11397
& the softcam.keys file goes in usr/keys
Give these configs a try
oscam.conf
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 1
preferlocalcards = 2
dropdups = 1
[streamrelay]
stream_relay_enabled = 0
[cccam]port = #####
version = 2.3.0
build = 3165
[dvbapi]enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox
[monitor]appendchaninfo = 1
[webif]httpport = #####
httpuser = user
httppwd = #######
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255
http_status_log = 1
oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 2
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;4AE1:000011,000014,0000FE,0E00:000000
services = !afn
ccckeepalive = 1
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 3
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
oscam.user
[account]
user = dvbapi
pwd = dvbapi
au = 1
betatunnel = 1833.FFFF:1702,1834.FFFF:1722
group = 1,2,3
& add a oscam.services file for AFN to run on 9.0E & Include this
[AFN]
caid = 0E00
provid = 000000
srvid = 0066,0067,0068,0069,006A,006B,006C,006D
-
thx. i will.
-
well, i got it running on couple channels (as a test), with osecam-emu, although afn, does't have pic !
i've seen an oscam svn1441, 1440, 1399, etc.
what is the diferences between oscam-emu & oscam svn... if any & witch one shoulb I use for dm with powervu ?
-
Keep using Oscam_Emu & you will be fine
There are loads of Oscam versions as it’s updated regularly..
The softcam.keys will change often
So you will have to keep these updated as & when they become available
Look Here -> SoftCam Keys
-
thx. i had to make an oscam.services for afn to clear & clear other channels. wonder why.
i hope the keys will be auto rolled by the oscam-emu, and i do not have to enter them manually every time they change.
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!