**********************************************************************************************
Important notice !!
This is the OFFICIAL version (06.03.2018)
There are no later versions.
If you have downloaded any version, listed as 1.8, 1.9, 2.x, 3.x 4.x, etc ... These are FAKE versions.
Be very careful when downloading non OFFICIAL versions,
we are not responsible for those versions or what their authors may have added.
The "Mod" versions that do not show their changes publicly go against the GPL-3.0 license.
License NCam: https://github.com/javilonas/NCam/blob/master/COPYING
Signed: Javier Sayago (Javilonas)
***********************************************************************************************
https://mega.nz/#!3JgTkIzS!XhH…C05vORKb9HP3zRcTpFxioHpls
:thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup:
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android ARM (For all api android).
ncam.arm-marvell ARM (Synology DS114, DS214 and similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
***********************************************************************************************
Ncam settings web::
Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam
Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.
Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.
If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225
***********************************************************************************************
