NCam Emu (Official)

There are 50 replies in this Thread which was already clicked 31,558 times. The last Post () by wawa16.

    • Official Post

    NCam 1.9-r1 (official)

    Changelog v1.9-r1:
    - Support for CCcam 2.3.2.
    - Fix Card Tivusat.


    Copyright (C) 2012 - 2018 developed by Javier Sayago (Javilonas).





    • Official Post

    NCam 5.1-r1



    Changelog v5.1-r1
    :


    - Patch rewrite doublecheck logic (By Mic).
    - Added cw hash mode 30, 31, 32, 33, 34 for powervu.
    - Increased MAX ECM length.
    - Latest changes Oscam.


    Compiled:


    ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
    ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
    ncam.x86 Linux PC (32 bit - i686).
    ncam.x86_64 Linux PC (64 bit).
    ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
    ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
    ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
    ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
    ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
    ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars).
    ncam.arm-android ARM (For Android ARM (API 24+)).
    ncam.arm-marvell ARM (Synology Armada 375 and similar).
    ncam.arm-armada37xx ARM (Synology Armada 37xx).
    ncam.arm-mca ARM (For Matrix CAM Air).
    ncam.arm-samsungtv ARM (For Samsung TV).
    ncam-router.mips Routers (Routers MIPSEL DD-WRT).
    ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
    ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
    ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
    ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
    ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

    ************************************************************ ***********************************


    Ncam settings web::


    Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
    user: root
    password: ldteam

    Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.
    Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.

    Config: /var/tuxbox/config
    SoftCam.Key: /var/tuxbox/config

    SoftCam.Key Not included!!
    The emulator is inactive for default.


    thx Javilonas

    ************************************************************ ***********************************

    • Official Post

    NCam 5.2-r1 (official) 14.09.2020


    Changelog v5.2-r1:

    - Rework code ref gbox_maxecmsend.

    - Fix sharing instability side effect.

    - [powervu] Fixed emm algo.

    - Fixed warning messages with high GCC 9.x.x

    - Fixed warning integer constant is too large for long type.

    - Add Newcamd NCam and MGcamd (Stealth mode)

    - Fixed gbox module ecm debug string error.

    - Add repeat to ask all gbox readers again during fallback time.

    - Fixed for CAK7 Cards HD03/04/05.


    Compiled:
    ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
    ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
    ncam.x86 Linux PC (32 bit - i686).
    ncam.x86_64 Linux PC (64 bit).
    ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
    ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
    ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
    ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
    ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
    ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars).
    ncam.arm-android ARM (For Android ARM (API 24+)).
    ncam.arm-marvell ARM (Synology Armada 375 and similar).
    ncam.arm-armada37xx ARM (Synology Armada 37xx).
    ncam.arm-mca ARM (For Matrix CAM Air).
    ncam.arm-samsungtv ARM (For Samsung TV).
    ncam-router.mips Routers (Routers MIPSEL DD-WRT).
    ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
    ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
    ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
    ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
    ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

    ************************************************************ ***********************************

    Ncam settings web::

    Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
    user: root
    password: ldteam

    Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.

    Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.

    Config: /var/tuxbox/config
    SoftCam.Key: /var/tuxbox/config

    SoftCam.Key Not included!!
    The emulator is inactive for default.
  • NCam-5.3-r2 (Official)


    Changelog v5.3-r2:

    - Fixed warning messages with GCC 11.x.x

    - Whitespaces cleaned.

    - Fixed Newcamd/CCcam buffer overflow.

    - Fixed Videoguard2.

    - Fixed DVBAPI FBC Tuner.

    - Fixed broken socket.

    - Refactoring the code and more.


    bin files for all architectures


    Download

  • NCam 5.5-r1 (oficial).



    Changes:


    - Increased the limit of allowed clients.

    - Fixes and optimizations in doublecheck.

    - Fixes for DGcrypt and add Caid 4AB0.

    - Add force ipv4 (Only viewable using IPV6).

    - Increased MAX_ECM_SIZE for SECA/NAGRA/NAGRA_MERLIN.



    Full Changelog:


    DOWNLOAD

    • Official Post

    NCam-6.0-r0 (Official)

    ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )


    Changelog v6.0-r0:

    - Fixed a small BUG with the timeout logic (ecmtimeoutlimit and ecmnotfoundlimit).


  • - Fix socket leaking.


    - Update CW Cycle and others.


    - Fix protocol webif, add others.


    - Try Timeout and NOK solution.


    - Clean global all emms from all readers after 30 days emm is last seen or 4 hours.


    - Try kill free job data to timeout.


    - Fix for protocol EMU.


    - Update and more fixes.


    - Fix restart.


    - Fix for CW Cycle Max.


    - Add new options to webif, resets readers (noks and timeouts).


    - Increased Max Cycle List Entrys to 8000 Entrys.


    - Increased Max Keep Cycletime to 480 min. (8 hours).

    • Official Post

    NCam-6.2-r0 (Official)

    ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )


    Changelog v6.2-r0:

    - Fix restart, logs and warnings.

    - Add latest changes Oscam.


    Thanks javilonas

  • NCam-6.4-r4 (Official)

    OFFICIAL version

    NCam cardserver v6.4-r4, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )

    Copyright (C) 2012 - 2022 developed by Javier Sayago (Javilonas).

    Visit https://www.lonasdigital.com/ for more details.

    Source Code: https://github.com/javilonas/NCam

    Mirror Source Code: https://github.com/ncam-project/NCam


    Compiled:


    ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).

    ncam.mips-openpli_40 Enigma2 - Mipsel (Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'...).

    ncam.mips-uclibc Enigma2/Others - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).

    ncam.x86 Linux PC (32 bit - i686).

    ncam.x86_64 Linux PC (64 bit).

    ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).

    ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).

    ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).

    ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).

    ncam.cortexa9hf-vfp-neon Enigma2/Others - ARM (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).

    ncam.cortexa15hf-vfp-neon Enigma2/Others - ARM (Cortex-A15 - Gigablue UHD, Vu+4K, Octagon 4k and similar).

    ncam.vuplus4k_arm Enigma2 - ARM (Vu+ Zero|Uno|Duo|Solo|Ultimo 4K and similar).

    ncam.james_donkey_arm Enigma2 - ARM (James Donkey DUO and similar).

    ncam.arm-aarch64-dreambox Enigma2 - ARM (Dreambox ONE|TWO).

    ncam.arm-dreambox Enigma2 - ARM (Dreambox DM9x0 UHD).

    ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similar).

    ncam.arm-android ARM (For Android ARM (API 24+)).

    ncam.arm-marvell ARM (Synology Armada 375 and similar).

    ncam.arm-armada37xx ARM (Synology Synology Armada 37xx and aarch64 similar).

    ncam.arm-mca ARM (For Matrix CAM Air).

    ncam.arm-samsungtv ARM (For Samsung TV).

    ncam-router.mips Mips (Routers MIPSEL DD-WRT).

    ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).

    ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).

    ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).

    ncam.router-openwrt-huawei-hg556a.mips Mips (Routers openwrt Huawei HQ556a).

    ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

    ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


    ***********************************************************************************************


    Ncam settings web:


    Ncam Admin Control: http://ip:8181/ (192.168.x.x or host-xx.org)

    user: root

    password: ldteam


    Important: [CCcam] Change (0-9 and A-F) NodeID (Important to respect all 16 characters).


    Change extended_cw_api in ncam.conf (Use 1 for ARM/PC (OE2.2), use 2 MPISEL/PPC (OE2.0)).


    Start ncam with: ncam -b


    Don't include -s (it's already set internally) or other unnecessary parameters or ncam will stop.


    Change in ncam.conf max_time, cw_cache_size and cw_cache_memory:


    max_time = 17 // The time that the ECMs are going to be ‎Keep in the cache‎.

    cw_cache_size = 2700 // CW cache count Max storage size (Affects the CPU (don't set a value too high)).

    cw_cache_memory = 5 // MBs max. memory used for CW cache size (Affects the RAM, don't set a value too high).

    ecm_cache_size = 2700// ECM cache count Max storage size (Affects the CPU (don't set a value too high)).

    ecm_cache_memory = 5// MBs max. memory used for ECM cache size (Affects the RAM, don't set a value too high).


    Config: /var/tuxbox/config

    SoftCam.Key: /var/tuxbox/config


    In order for the ICAM system to work without problems, modify the settings of your enigma2 image like this.

    in the Enigma settings/extras (ATV/OPENLD/OTHERS: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):


    Set Integrate ECM in HTTP streams to YES

    Decrypt HTTP Streams YES

    Decrypt received HTTP streams NO


    SoftCam.Key Not included!!

    The emulator is inactive by default.


    One very important thing to note, official NCam does not work the same as unofficial versions and the settings are not the same.


    If you have any doubts, you can formulate it at https://www.lonasdigital.com/forums/ncam.1225/


    ***********************************************************************************************


    Changelog v6.4-r4:

    - Add support iCam (Thanks to the creator @icb of the ICAM v8 patch).

    - Add new KScamd protocol (still in development).

    - Fixes for Stream Relay.

    - Fixes for Radegast protocol and icam.

    - Fixes for Viaccess and VideoGuard.

    - Optimized for lower RAM and CPU consumption.

    - Fixed issue preventing ICAM from starting

    - Fixed issue that forced KScamd to have newcamd line active.

    - Fixed the problem that modified the protocols used by users when accessing them via webif.


    --------------------------------------------------------------------

    --------------------------------------------------------------------



    • Official Post

    please help where i put this ncam and how whit filezilla


    Its not an ipk, so you`ll need to have previously installed an older version that provides the necessary start script for the image softcam manager.

    Take the correct file that is compatible for your receiver and replace the existing version that can be found in /usr/bin.

    Permissions on the new version must be 755 and be named exactly the same as the old version or it won`t start.

  • NCam-6.6-r1 (Official)

    Code
     - Fix bug that prevented ICam from working normally on some architectures. - Prevent ffdecsa from going through global optimization at compile time (Makes the system more stable). - Added new build for Armada 38x.

    works super


    Thank you ; lonas

NCam Support Forum

Configs, discussion, downloads and guides for NCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!