hi im not sure if anyone can help me or if im posting in the right room, i have a dinobot u5 mini and the channels on enigma 2 keeps freezing... ive checked the line on another reciver its ok
Dinobot 4K Update - Including missing E2 afterwards ( Solved )
- KiddaC
- Thread is marked as Resolved.
-
-
by channels are your refering to satellite channels free to air, sat channels via cs, or iptv.
Free to air - dish misalignment
CS - dish alignment, crap server, poor internet.
IPTV - poor internet, your line has reached its max users. if yours - worry. If found on the internet. Thats what hacked iptv lines do :)
can you create a new thread in the dinobot 4k section. It's not really relevant to this post. Thanks
-
Hello everyone
I have a Dinobot 4k +
and after an update made Enigma 2 has disappeared !!!
I tried to attach the MAC to the usb stick
me if I go in
Live tv
Menu
Misc
does not see the MAC for restoring Enigma 2
I have also tried to restore factory data
But nothing!!!
There is someone who can help me !!!
Thank you very much!!!
-
I need help on this to cant get it to work for me either
-
Have you followed the guide in post 1 and updated mac address etc?
Dinobot 4K Update - Including missing E2 afterwards ( Solved )
Try formatting your usb stick with this and try again
-
no still doesn't work if some one could upload a video may be more help
-
Hi guys
Dinobot 4k Plus Recovery Images latest 2018-07-02
Fixed with this update without unpacking the file otherwise it does not read it !!!
turn off the decoder
Download
Copy to usb
collagate to the decoder
Press Reset - switch on the decoder - for a long time until the update ...
As if by magic
Returned Enigma 2
If you need help you have nothing to ask for !!!
-
just wont read it off the usb just keeps going to the android page
-
Hello amielea
I repeat the procedure
Download this file:
-Dinobot 4K+ Normal : update.zip - Google Drive
Includes Android and E2 openATV
Dinobot Full recovery Images
Update 2018-07-02
Do not unpack.
the normal Update.zip on an empty USB stick.
Turn off the box from the main switch, insert the USB key on the back, press the Reset button on the back, hold it down, turn on the main switch until Update is shown on the display, then wait until the box is restarted.
Ps: Manufacturers should remove this update that does not work from the Dinobot update server.;)
-
so hold down reset button until update appears on the front of the box yea?
-
right it says update on the front then when it loads up still no e2 on the power button?
-
hi mate
I've also been gonin crazy with this and have just seen this post and when going into live TV, setup, misc I cannot find any options for write Mac?
Any ideas please.. Thanks
-
master G
Moved the thread from forum Dinobot 4K Support to forum Dinobot 4K. -
Hello
have a dinobot u5mini
after update to Android 8 I have no enigma2 more. have downgrade and try enigma2 to install but not?Is always on the display and nothing moves.
Have edit new Mac address. Like here
-
Do I not explain all this on the first post.
-
yes my friend i do all this what you say.
I format the stick of fat32. Download openatv 6.3 copy past dinoboot folder in stick. I put it in the usb port pres the green button and see updt on display. I wait 1h and not instal. In the tv sceen i see only the boot menu. Not upload image.
Why
-
I have the same problem. I did upgrade back to Android 7 and E2 (the recovery image should have both Android and E2) and tried all ways to get back E2 but nothing. I can get request for which system I like as starting system. Ok with Android but nothing with E2. If I set E2 the E2 display stays stucked and nothing happens. I've tried with OpenATV image on usb stick then pressed green button on remote. Upgd appears on display but nothing. I've also checked with LiveTv app in Android for Mac write but correct Mac address is already stored. If I confirm Mac and receiver reboots still no E2. My receiver is U5Mini 4K
-
Use the usb port in the back of your dinobot for flashing.
I always just press green, ok, green, ok .... over and over to try and kick it in. It doesn't always work.
-
Thanks KiddaC for your suggestion. I've tried your procedure several times without success. Still upgd display and green led fixed and not blinking so I suppose nothing loading. I am quite depressed because I think this unit could be very performant but if it is so difficult to recovery normal operation is very unusefull. I will try again for some time and in case of no success to get back E2 I will send it back to dealer and ask for refound.
-
When the flash kicks in, you get a black background with bit white blocky text saying its flashing with a progress bar. So you know after a few seconds whether its kicked in.
Don't send it back. These boxes are mint.
So on your usb stick have you got the correct folders.
then U5
then
if you have a file that says noforce. Rename it to force
-
Thanks again. On the usb stick I have Dinobot folder only and no backupstick.txt as you pointed out. Into Dinobot folder I have only three files named : kernel.bin, imageversion and rootfs.tar.bz2. There is no force or noforce file. The image file is OpenATV 6.3 dated 04-04-2019. I see your files are older. Maybe this is the problem. Could you give me address where to download the files you mention. Thanks
Dinobot 4K images
Download openatv, pure2, openhdf images | firmware for Dinobot 4K and Dinobot 4K SE, android, enigma2, satellite and cable linux hd receivers.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!