Is CCcam 2.3.2 only for arm recievers?

There are 8 replies in this Thread which was already clicked 4,183 times. The last Post () by canthackit.

  • Hi

    Been away for a time, just installed 2.3.2 om my Solo4K installed MasterG's ipk file worked straight away.


    So as per subject line is 2.3.2 only for arm cpu's ?

    Only I have and been running a DB800SE clone as a server then I fitted an A8P sim about a year ago, but always had problems with CCcam I usually run 2.3.0, the only thing it will do is update my NC+ card if I try to access any info after that the box just locks up.......it has always done this so I then have to close down the webif reboot the box into oscam to get channels to work.


    Can anyone offer any info or give any clues as to whats going wrong.


    Best Regards: Canthackit

    • Official Post

    So as per subject line is 2.3.2 only for arm cpu's ?

    Its also available for MIPS based receivers like the dreambox.

    Download and extract CCcam.2.3.2.zip (use CCcam.mips32el version).

    FTP to /usr/bin on the dreambox > look for cccam binary, it could be named CCcam_2.3.0, the naming of this file is important > rename downloaded/new CCcam.mips32el to the same as old CCcam, ie CCcam_2.3.0 > send new cccam to the box > change permissions on new CCcam to 755 > reboot.

  • Hello

    First problem running openpli loaded extracted unzipped file to /tmp, gone to the box it say's no files to display.

    In for a penny in for a pound, going to see if I can find an overnight image Pli of course.


    regards: canthackit

  • Errrr beg to differ Boss but yes it does i'm looking at it now.


    Still i've loaded the latest Openpli 17/09/18 i'm going to ftp the mipsel file to the box.


    The above ipk file is the same as the first one, anyways neither are showing in /usr/bin


    Regards: canthackit

  • Right managed to get the arm version to install


    what on a dm800se ?


    use as MasterG said in first reply


    and renane to the same as what you have in usr/bin

    parabéns cr7 & moliveira88

    Μπρέντφορντ Φ.Σ

    RIP Vangelis Papathanassiou

    Edited once, last by Antepenultim8 ().

  • Can't get 2.3.2 to work so far, so running 2.3.0 on now ATV 6.2.

    Can't get any peers to connect, can someone please check my CCcam.cfg and see whats wrong.


    F: user1 pass1 1 0 0 { 0:0:1 } { } { }

    F: user2 pass2 2 0 0 { 0:0:2 } { } { }

    F: user3 pass3 2 0 0 { 0:0:2 } { } { }

    F: uesr4 pass4 2 0 0 { 0:0:2 } { } { }

    F: user5 pass5 2 0 0 { 0:0:2 } { } { }

    F: user6 pass6 1 0 0 { 0:0:1 } { } { }

    F: user7 pass7 2 0 0 { 0:0:2 } { } { }

    F:user8 pass81 0 0 { 0:0:1 } { } { }

    F: user9 pass9 2 0 0 { 0:0:2 } { } { }

    F: user10 pass10 2 0 0 { 0:0:2 } [ } { }

    F: user11 pass11 1 0 0 { 0:0:1 } { } { }

    F: user12 pass 12 1 0 0 { 0:0:1 } { } { }

    SERVER LISTEN PORT:12000

    ALLOW TELNETINFO: yes

    ALLOW WEBINFO: yes

    SHOW EXTENEDED CLIENT INFO : yes

    WEBINFO LISTEN PORT : 16001

    WEBINFO USERNAME : linuxsat

    WEBINFO PASSWORD : support

    TELNETINFO LISTEN PORT : 16000

    TELNETINFO USERNAME : linuxsat

    TELNETINFO PASSWORD : support

    ZAP OSD TIME : 1

    OSD USERNAME : linuxsat

    OSD PASSWORD : support

    OSD PORT : 80

    SMARTCARD CLOCK FREQUENCY: /dev/sci0 3750000

    #SERIAL READER : /dev/ttyUSB0 smartreader+

    SMARTCARD CLOCK FREQUENCY: /dev/sci1 3750000

    #SERIAL READER : /dev/ttyUSB1 smartreader+

    SHOW TIMING : yes

    MINI OSD : no

    DEBUG : yes

    NEWCAMD CONF : no

    #DISABLE EMM : yes

    #EXTRA EMM LEVEL : no

    #EMM THREADS : 1

    SOFTKEY FILE : /var/keys/SoftCam.Key

    AUTOROLL FILE : /var/keys/AutoRoll.Key

    STATIC CW FILE : /var/keys/constant.cw

    CHANNELINFO FILE : /var/etc/CCcam.channelinfo

    CAID PRIO FILE : /var/etc/CCcam.prio

    PROVIDERINFO FILE : /var/etc/CCcam.providers

    #MINIMUM DOWNHOPS: 1

    MINIMUM CLIENT VERSION : 1.7.0

    LOG WARNINGS : /tmp/warnings.txt

  • I think i've sussed what the problem was, it looks like this bloody BT dynamic ip address had changed yet again, it does so regularly I never noticed so this caused the port forwarded to have changed.

    I havn't managed to get 2.3.2 to my initial request to work, but I will continue later atm i've had enough been at it for hours and hours.


    Regards: canthackit

CCcam Support Forum

Configs, discussion, downloads and guides for CCcam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!