Can't pair my card

There are 8 replies in this Thread which was already clicked 1,761 times. The last Post () by putz182.

  • Hi, I'm having trouble to pair my card. I have no clue about it since this my first card pairing.



    21:28:41 0CFB0BDE r (reader) sky [mouse] IFD: Transmit size 5 bytes, expected len 4 bytes, delay 0 us, timeout=5818 us

    21:28:41 0CFB0BDE r (reader) sky [mouse] IFD: ICC_Async_InvertBuffer: size=5 buf[0]=d0

    21:28:41 0CFB0BDE r (reader) sky [mouse] IFD: Transmit succesful

    21:28:41 0CFB0BDE r (reader) sky [mouse] IFD: ICC_Async_InvertBuffer: size=5 buf[0]=f4

    21:28:41 0CFB0BDE r (reader) sky [mouse] IFD: Setting timeout to 14400 ETU (5985250 us)

    21:28:41 0CFB0BDE r (reader) sky [mouse] IFD: Receive size 1 bytes, delay 0 us, timeout=5985250 us

    21:28:41 0CFB0BDE r (reader) sky [mouse] IFD: RECEIVED:

    21:28:41 0CFB0BDE r (reader) 08

    21:28:47 0CFB0BDE r (reader) sky [mouse] IFD: Setting timeout to 14 ETU (5818 us)

    21:28:47 0CFB0BDE r (reader) sky [mouse] IFD: Transmit size 5 bytes, expected len 4 bytes, delay 0 us, timeout=5818 us

    21:28:47 0CFB0BDE r (reader) sky [mouse] IFD: ICC_Async_InvertBuffer: size=5 buf[0]=d0

    21:28:47 0CFB0BDE r (reader) sky [mouse] IFD: Transmit succesful

    21:28:47 0CFB0BDE r (reader) sky [mouse] IFD: ICC_Async_InvertBuffer: size=5 buf[0]=f4

    21:28:47 0CFB0BDE r (reader) sky [mouse] IFD: Setting timeout to 14400 ETU (5985250 us)

    21:28:47 0CFB0BDE r (reader) sky [mouse] IFD: Receive size 1 bytes, delay 0 us, timeout=5985250 us

    21:28:47 0CFB0BDE r (reader) sky [mouse] IFD: RECEIVED:

    21:28:47 0CFB0BDE r (reader) 08

    21:28:53 0CFB0BDE r (reader) sky [mouse] card system not supported

    21:28:53 0CFB0BDE r (reader) sky [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

    21:28:53 0CFB0BDE r (reader) sky [mouse] card initializing error

    21:28:54 00000000 s (main) init for all local cards done

    21:28:54 00000000 s (emmcache) loading emmcache disabled since no reader is using it!

    21:28:54 00000000 s (emmcache) loading emmstats disabled since no reader is using it!

    21:28:54 00000000 s (anticasc) anti cascading disabled

    21:28:54 243DDFBD c (newcamd) client connected to 16000 port

    21:28:54 243DDFBD c (client) anonymous disconnected from 192.168.2.188

    21:28:54 44497E71 c (newcamd) client connected to 16000 port

    21:28:54 44497E71 c (-) -- Skipped 1 duplicated log lines --

    21:28:54 44497E71 c (client) anonymous disconnected from 192.168.2.188

    21:28:54 366FC32B c (newcamd) client connected to 16000 port

    21:28:54 366FC32B c (client) anonymous disconnected from 192.168.2.188

    21:28:54 784AD03C c (client) encrypted newcamd:16000-client 192.168.2.188 granted (tvheadend, au=on (1 reader))

    21:28:54 784AD03C c (newcamd) user tvheadend authenticated successfully (Tvheadend)

    21:28:54 784AD03C c (newcamd) AU disabled for user tvheadend


    *21:28:53 0CFB0BDE r (reader) sky [mouse] card initializing error*



    [global]


    logfile = stdout

    CacheDelay = 30

    nice = -1

    lb_mode = 1


    [newcamd]

    port = 16000@0907,0942,0946:000000

    serverip = 192.168.2.247

    key = 0102030405060708091011121314

    keepalive = 1


    [webif]

    httpport = 8889

    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,255.255.255.255


    [reader]

    label = sky

    protocol = mouse

    device = /dev/ttyUSB0

    detect = cd

    group = 1

    caid = 0946

    mhz = 358

    cardmhz = 358


    [reader]

    label = emulator

    protocol = emu

    device = emulator

    disablecrccws_only_for = 0E00:000000

    caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1

    detect = cd

    ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE

    group = 1

    emmcache = 2,1,2,1

    emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE


    [account]

    user = tvheadend

    pwd = tvheadend

    caid = 0907,0942,0946

    au = emulator

    group = 1

  • Yes, it is. I've tryed, but there is no one willing to help. That's why I'm posting here. I know some users from here got it working due to some posts I've read. I really need some guidance.

    Edited once, last by putz182 ().

  • I have a Gemalto / Omnikey (pscs) and Phoenix TBS3102 (mouse).

    With pscs I get direct fail. With TBS it communicates but through a protocol error.


    11:00:53 670075A9 r (reader) [mouse] Transmit:

    11:00:53 670075A9 r (reader) D0 74 01 80 01

    11:00:53 670075A9 r (reader) [mouse] IFD: ICC_Async_InvertBuffer: size=5 buf[0]=d0

    11:00:53 670075A9 r (reader) [mouse] IO: Write timeout 1458 us, write delay 0 us, to send 5 char(s), chunksize 5 char(s)

    11:00:53 670075A9 r (reader) [mouse] IO: Sending:

    11:00:53 670075A9 r (reader) F4 D1 7F FE 7F

    11:00:53 670075A9 r (reader) [mouse] IO: Reading 5 echoed transmitted chars...

    11:00:53 670075A9 r (reader) [mouse] IO: Read timeout 9990000 us, read delay 0 us, to read 5 char(s), chunksize 5 char(s)

    11:00:53 670075A9 r (reader) [mouse] IO: Receiving:

    11:00:53 670075A9 r (reader) F4 D1 7F FE 7F

    11:00:53 670075A9 r (reader) [mouse] IO: Reading of echoed transmitted chars done!

    11:00:53 670075A9 r (reader) [mouse] IFD: Transmit succesful

    11:00:53 670075A9 r (reader) [mouse] IFD: ICC_Async_InvertBuffer: size=5 buf[0]=f4

    11:00:53 670075A9 r (reader) [mouse] IFD: Setting timeout to 57600 ETU (6002016 us)

    11:00:53 670075A9 r (reader) [mouse] IFD: Receive size 1 bytes, delay 0 us, timeout=6002016 us

    11:00:53 670075A9 r (reader) [mouse] IFD: RECEIVED:

    11:00:53 670075A9 r (reader) 20

    11:00:53 670075A9 r (reader) [mouse] IO: Read timeout 6002016 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)

    11:00:59 670075A9 r (reader) [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=6002016 us

    11:00:59 670075A9 r ERROR, function call crdr_ops->receive(reader, data, size, delay, timeout) returns error.

    • Official Post

    You have pcsc reader with mouse protocol have you try to connect reader as pcsc?

    If you get erors you might have PCSC wrong setup


    Use protocol PCSC and in device use 0 se example belowe


    Code
    [reader]
    label     = mypcscreader
    protocol  = pcsc
    device    = 0
    aeskey    = 0102030405060708090a0b0c0d0e0f10
    group     = 4
    caid      = 0600

    -------------------------------------------------------------------------------------------------

    Everything in life that's any fun is either immoral, illegal or fattening

    If you want to support the Linuxsat-Support forum

    Become a VIP Member

  • You have pcsc reader with mouse protocol have you try to connect reader as pcsc?

    If you get erors you might have PCSC wrong setup


    Use protocol PCSC and in device use 0 se example belowe


    Code
    [reader]
    label     = mypcscreader
    protocol  = pcsc
    device    = 0
    aeskey    = 0102030405060708090a0b0c0d0e0f10
    group     = 4
    caid      = 0600

    seagen The dudes reader in post one indicates that the pheonix reader is being used and mouse protocol is actually ok for this, i have used mouse protocol for nds cards in the past with TBS3102 readers/// uk / germany and italy cards without issues.


    putz182 Pheonix readers must have the dip switches set correctly and also configs to match in oscam so if you are unsure of this then try your omnikey as seagen has stated..set your card speed with omnikeys at 500mhz if its a 3121 model you have?


    Never seen or heard of gemalto readers? i,m assuming they are similar to omnikeys readers?


    Also you may need box id for oscam config or maybe other hidden info you cant obtain, caid 0946 could be hardware paired meaning the card will only work in official recievers or cam modules supplied.




    putz182 ,

  • @johndeere88 You are write! I know the box key but I don't know a way to pair it.

    I've tried with omnikey and Phoenix, but both I have initialization error.


    My version of omnikey is 3021. Any other thoughts?

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!