BPanther's Neutrino - v4.xx (FLASH) & (USB) tar.gz for spark 7111 _ 28/06/2024
-
- Spark 7111 Neutrino
- ahmed gazye
- Thread is marked as Resolved.
-
-
ahmed gazye
Changed the title of the thread from “BPanther's Neutrino - v3.xx for spark 7111 26/04/2020” to “BPanther's Neutrino - v3.xx for spark 7111 18/05/2020”. -
-
ahmed gazye
Changed the title of the thread from “BPanther's Neutrino - v3.xx for spark 7111 18/05/2020” to “BPanther's Neutrino - v3.xx for spark 7111 25/05/2020”. -
-
Как включить Oscam,Wicardd....?
-
-
ahmed gazye
Changed the title of the thread from “BPanther's Neutrino - v3.xx for spark 7111 25/05/2020” to “BPanther's Neutrino - v3.xx for spark 7111 11/06/2020”. -
-
ahmed gazye
Changed the title of the thread from “BPanther's Neutrino - v3.xx for spark 7111 11/06/2020” to “BPanther's Neutrino - v3.xx for spark 7111 18/06/2020”. -
-
Hello my friend Ahmed
Is it possible to get epgGrabber plugin by Ziko work on the neutrion images ?
Please try it out for us and i'm sure you can do your best !
-
Hello my friend / Marwan2015
Ido not own the device 7111 My device 7162 processor and there is no version for the device from the team Also, the plugin nfr4X Multiboot does not install copies of the Neutrino
Since you have the same device and you have the version installed on it, as well as you have extensive experiences in this field, thank God, why do not you try to make this
-
Hello my friend / Marwan2015
plugin and his developer are present in the forum on the following link, why don't you write to him the problem with the topic, because it is better to solve the problems of plugin than anyone else because he is the developer
-
Thank you my friend/ Ahmed
For your reply
-
ahmed gazye
Changed the title of the thread from “BPanther's Neutrino - v3.xx for spark 7111 18/06/2020” to “BPanther's Neutrino - v3.xx for spark 7111 22/06/2020”. -
-
my freind ahmed
good day
i install this image just for test on part of my external flash
the image was strange and i couldn't deal with it and this wasn't the problem
but the problem that i couldn't move to another images so i make the simple way by closing my box(Truman +1) off and try to go to the internal image by the old way but i have a serious problem there was no spar or enigm after holding on power and replaced on screen with ERRI tried many times but still the problem
i also try rescue image but i didn't succeed my device still on err
and i left the box an hour and opened it again and it open this enigma image (neutrino)
now i want to go back to my internal image to remove this image but i do not know how ?
-
dear / amrsalah45
God willing, there will be a solution do not worry
This information should be kept in mind, get to know it, and leave it aside now for a duty on the questions that follow first
First, remove any external flash that is installed on the device
- use kingston or sandisk usb 4 or 8 GB
- Most of the problems of not accepting the rescue-image will be a defect from the usb that the device cannot read from
- Rescue Soft must be installed while you are on the Spark system, not a system enigma2 Until it is accepted
- It is possible not to accept Soft Rescue from the first times, meaning that you repeat the process once, two and three until it ends and the receiver accepts the software even if it did not succeed. Download another copy of Softrescue until you succeed, God willing,
- In some cases Spark devices not accept soft rescue in by usb So we will use passing the rescue-image for Spark devices using
Cisco TFTP Server
Now I want a response to the following you say
(and i left the box an hour and opened it again and it open this enigma image (neutrino))
Is that happening and you remove external flash that is installed on the device?
As long as a device crosses to copy neutrino in external flash
Have you tried using a j00ztalator 2.4 program for cross to another version on the external or internal flash or Spark system?
dear / amrsalah45
Before answering the questions, please open this topic by making a new topic with the problem in the Spark section, even for the purpose of organizing the section and everyone can benefit from the topic.
-
ahmed gazye
Changed the title of the thread from “BPanther's Neutrino - v3.xx for spark 7111 22/06/2020” to “BPanther's Neutrino - v3.xx for spark 7111 28/06/2020”. -
-
dear Ahmed
i make a topic for my problem
problem in truman premier 1 plus - boot
thanks for your effort
-
ahmed gazye
Changed the title of the thread from “BPanther's Neutrino - v3.xx for spark 7111 28/06/2020” to “BPanther's Neutrino - v3.xx for spark 7111 12/07/2020”. -
BPanther Administrator
-> OK
-> UNTESTED (automatically built)
-> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 12/07/2020
https://pingulux.mbremer.de/FLASH/
-
is it ok with truman spark hd mini ??
-
-
yes, my device has 7111 processor
THANKS AHMED
Spark STI 7111 Images
Download Enigma2 Images and Spark Firmware for ADOH R1, Amiko Alien SHD 8900, Amiko Alien Mini, Goldmaster HD 1200, Golden Media 990 CR HD PVR Spark LX, Golden Media Spark Reloaded, Edision Argus Pingulux, Edision Argus Pingulux Plus, Galaxy Innovations GI S, SAB Unix F+ Solo, Dynavision Spark, Dynavision Spark Plus, Fulan Spark I+, Truman Premier 1+, Samsat Linux 1, Startrack SRT 2020 HD, FullHD FH 2020 HD, Yumatu Spark, Visionnet Hammer, Visionnet Fireball, Superbox S750, Sogno Spark Revolution Spark STI 7111 Receivers.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!