DreamUP Patched dm800 clone ( fix no ca error)

There are 7 replies in this Thread which was already clicked 680 times. The last Post () by emhnasir.

    No ca found by 2nd stage loader
    This can be done in 2 ways.
    1) You have to have a working dreambox.
    2) DM800_repair, you alter dreamup to be able to use greyed buttons.
    Now for the first sollution.
    1) Connect working dreambox DM600/DM800.
    2) Open dreamup, press connect.
    3) When dreambox is found by dreamup, insert Null-Modem cable in
    the broken dreambox.
    4) Press flash button, and chose a firmware.
    5) The flash progress will probably hang, its OK.
    6) Open dreamup again, connect the broken box, press connect.
    7) If all went ok, you can now flash box again, (Use only serial
    communication)
    Now for the second sollution
    1) Connect broken dreambox DM600/DM800
    2) Open dreamup, press connect.
    3) When you see second loader error popup, just press ok.
    4) Open
    5) Drag DM800_repair in front of dreamup, and press dream multimedia logo.
    6) Now press the greyed Flash button, and chose firmware.
    7) The flash progress will probably hang, its OK.
    Cool Open dreamup again, connect the broken box, press connect.
    9) If all went ok, you can now flash box again, (Use only serial
    communication)


    File
    JapharFlasher by GoodSat
    This is the original DreamUp modified to work with ALL SIMs, for Clones and Originals. Will work with Ferrari Sim, Japhar Sim, A8P Sim, and Sim2 Sim as well as the Original Sims.
    master G

    Hi all,


    I have a sim 2.01 clone (sold as genuine DM800 - thought it was cheap!). Anyway, I got the dreaded NO CA found error.


    I followed the advice here and from a few other forums.


    I tried all ways to fix the problem. The only way for me was an old laptop with REAL serial port, and win XP. I tried different usb/serial ports but they don't work.


    Universal Dreamup v2009 (by Flickster), and dm800 repair. Worked first time no problems! Thanks to all the guys / girls that did the software and found it out the hard way.
    All now working :-)


    Thanks again,


    Stargateuser :-)

    Probleem Dm800se cloniga: dream up v. 1.3.3.7 -mega ei saa flaci peale lasta ,koguaeg tuleb displeil ette no ca fond

    I have the same problem , i do the procedure with no succes
    The dreamup recognize the dm800hd i select the flash buton and select image DreamElite
    12:09:59 PM box type: DM800
    12:10:53 PM Calculating checksum...
    and do not start flashing

    Quote from klodi1980

    I have the same problem , i do the procedure with no succes
    The dreamup recognize the dm800hd i select the flash buton and select image DreamElite
    12:09:59 PM box type: DM800
    12:10:53 PM Calculating checksum...
    and do not start flashing

    I have the same problem , i do the procedure with no succes
    The dreamup recognize the dm800hd i select the flash buton and select image
    20:00:09 AM box type: DM800
    20:01:53 AM Calculating checksum...
    and do not start flashing


    and if i tried with optiflasher
    appeared
    no boot response!!!


    can help me my problem???
    i am very frustated

    I have the same problem , i do the procedure with no succes
    The dreamup recognize the dm800hd i select the flash buton and select image
    20:00:09 AM box type: DM800
    20:01:53 AM Calculating checksum...
    and do not start flashing


    and if i tried with optiflasher
    appeared
    no boot response!!!


    can help me my problem???
    i am very frustated

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login