AJPanel Enigma2 Tools - discussion & support

Quote from Al3arab

Quote from saalty

Quote from saalty

Yes, I tried it this way and to setup 4097 in settings as well. Info bar shows "Playing" but no picture nor sound. Friend of mine can play same portal with 4097 (different type of STB/OpenATV/maybe AJ Panel)

pasted-from-clipboard.png

The situation is the same yet. As you can see the status bar is showing that the stream is playing, but no pictures, with 5002 there is.

When I use playlist, I can play with 4097.

My stb is AB PULSe 4K, image is OpenATV 7.6 alpha (but was the situation same with stable 7.5.1)

Is there any suggestions how to solve it? Since Multistalker Pro is not free I cannot try to play with other app, but as I mentioned, others can play with 4097 (different stb and different OpenATV)

Display More

This has nothing to do with the plugins.

Since there is no problem on other devices, it may be related to the hardware and the player on your device.

Display More

When I change to Play with... DVB after pressing Menu button on rc, then it starts to play (but stream is not good as the picure is slow), but after that when I change back to 4097 then it starts playing normaly. After channel change I have to make this little trick again

Ajpanel my device vu duo. İmage:open pli 9.1 not install.please help me.

With the latest release of Egami 10.6 R8 I have an annoying glitch when viewing iptv lists with the latest version of ajPanel. Everything works, and well too, but a box appears on the screen in the middle of the screen and does not allow viewing. I have not found a way to remove it. Can anyone help me?

Ps. This happens only with VOD and series viewing.

hi,

I have a crash when I go to Bouquet Editor - Select a subouquet to copy to the main bouquet list - I did exit 2 times and the plugin crashed. The gui of the device was restarted. This is happening many times on OpenAtv 7.5.1.

Quote from danilo82

hi,

I have a crash when I go to Bouquet Editor - Select a subouquet to copy to the main bouquet list - I did exit 2 times and the plugin crashed. The gui of the device was restarted. This is happening many times on OpenAtv 7.5.1.

Attach the crash log to see what are the problem you faced

Quote from Oberdan

With the latest release of Egami 10.6 R8 I have an annoying glitch when viewing iptv lists with the latest version of ajPanel. Everything works, and well too, but a box appears on the screen in the middle of the screen and does not allow viewing. I have not found a way to remove it. Can anyone help me?

Ps. This happens only with VOD and series viewing.

Hi, Menu - Setup - TV - Playback, recording and timeshift - VOD, Stream and Standby Setup.

Disable the entry: Enable VOD in Channels list after Save

I am now using 9.4.

Anything 10.0 and above,IPTV will either take a long time to show video and audio, or not play at all.

Zgemma H9SE with Openpli 8.3 Py 2.7.18.

Quote from saalty

Quote from Al3arab

Quote from saalty

Quote from saalty

Yes, I tried it this way and to setup 4097 in settings as well. Info bar shows "Playing" but no picture nor sound. Friend of mine can play same portal with 4097 (different type of STB/OpenATV/maybe AJ Panel)

pasted-from-clipboard.png

The situation is the same yet. As you can see the status bar is showing that the stream is playing, but no pictures, with 5002 there is.

When I use playlist, I can play with 4097.

My stb is AB PULSe 4K, image is OpenATV 7.6 alpha (but was the situation same with stable 7.5.1)

Is there any suggestions how to solve it? Since Multistalker Pro is not free I cannot try to play with other app, but as I mentioned, others can play with 4097 (different stb and different OpenATV)

Display More

This has nothing to do with the plugins.

Since there is no problem on other devices, it may be related to the hardware and the player on your device.

Display More

When I change to Play with... DVB after pressing Menu button on rc, then it starts to play (but stream is not good as the picure is slow), but after that when I change back to 4097 then it starts playing normaly. After channel change I have to make this little trick again

Display More

Is this issue for me with any image what I tried for 4097 service, and another issue with no audio on EAC3 channels can come from why I have AB PULSe receiver with HiSilicon chip? In my understanding it use "HiSilicon Service" for 4097 but other chips "SeviceMp3". Is it cause these problems?

If yes then is there any solution?

Quote from madhouse

Quote from Oberdan

With the latest release of Egami 10.6 R8 I have an annoying glitch when viewing iptv lists with the latest version of ajPanel. Everything works, and well too, but a box appears on the screen in the middle of the screen and does not allow viewing. I have not found a way to remove it. Can anyone help me?

Ps. This happens only with VOD and series viewing.

Hi, Menu - Setup - TV - Playback, recording and timeshift - VOD, Stream and Standby Setup.

Disable the entry: Enable VOD in Channels list after Save

I really thank you very much, I would never have been able to find it. Now everything is ok

Can I change the language or is it just English?

Thank you

For B, only English

Hello and thank you for this fabulous plugin...

I noticed in multiboot that some images, like OpenATV 7.5, 7.6, or even OpenATV 9.1, only work when refreshing the channel, while it opens directly with other images.....

Hi!

If I have server from other timezone and EPG is according to this timezone, can I fix it to show EPG in my timezone without time difference?

Hocamm Professor We cannot do this panel in Turkish

The deb.extension of the plugin was installed on the device with the dreambox 920 OE 2.5 software installed

shows the error in the picture

biko

Thanks Biko for sharing this, just quick points.

1. When taken a screenshot for video with Arabic names (Arabic letters), The screenshot image shows no name and display -------------.jpg

2. This was old requested feature to add option to process user channels by delete, export, import...etc, in other word, if you have like 200 test channels and you want to filter it to select all and delete it, same for radio channels....etc.

Regards

Quote from kalkan99

The deb.extension of the plugin was installed on the device with the dreambox 920 OE 2.5 software installed

shows the error in the picture

Quote from Mahmoud Hussein

biko

Thanks Biko for sharing this, just quick points.

1. When taken a screenshot for video with Arabic names (Arabic letters), The screenshot image shows no name and display -------------.jpg

2. This was old requested feature to add option to process user channels by delete, export, import...etc, in other word, if you have like 200 test channels and you want to filter it to select all and delete it, same for radio channels....etc.

Regards

Display More

all suggestions or errors informed are taking on consideration by the developer and will take action

The plugin disappeared after the last update.

This message appears on Dreamos images.

2025-04-14_002241.jpg

@kalkan99 @Mahmoud Hussein @4evervu+

Waiting for your feedback after new release 10.8.1

Quote from biko

@kalkan99 @Mahmoud Hussein @4evervu+

Waiting for your feedback after new release 10.8.1

After updating the plugin, I did not get any installation errors.