That mean the config structure is wrong
a example that work is like that
[
{
"tmdb_key": ""
},
{
"subdl_key": ""
},
{
"http://ip:port/c/": "macid",
"entryPoint": "portal"
}
]
That mean the config structure is wrong
a example that work is like that
[
{
"tmdb_key": ""
},
{
"subdl_key": ""
},
{
"http://ip:port/c/": "macid",
"entryPoint": "portal"
}
]
See this post:
RE: MultiStalker Pro - discussion & support
So, you need to delete you old Multistalker,json and add new Mulstistalker.json from that link.
Then, you add yours portal via Webinterface.
You don't read the topic and don't think about what you read.But well.You will learn.Be persistent
Please guys use the web interface its simple and easy.
list of portals should go here, but it remains empty
it also shows blank for me..
This is the address where you add portals with your device ip.
http://192.168.xxx.xxx/multi-stalkerpro/portals
Do you see like this?
08-06-2024 17-30-16.jpg
Than you're ok.
the new format must be like this
{
"subdl_key": "xxxxxxxxxx"
},
{
"tmdb_key": "xxxxxxxxxxxxx"
},
{
"host": "http://xxxxxxxxxxxxxxxx",
"mac": "xxxxxxxxxxx",
"type": 1,
"entryPoint": "portal.php"
},
{
"host": "http://xxxxxxxxxxxxxxxx",
"mac": "xxxxxxxxxxxxx",
"type": 1
},
{
"host": "xxxxxxxxxxxxxxxxxxxxx",
"mac": "xxxxxxxxxxxxxxxxx",
"type": 1,
"entryPoint": "portal.php"
},
{
"host": "http://lxxxxxxxxxxxxxxxxx",
"mac": "xxxxxxxxxxxxxxxxxxxxxx",
"type": 1
"type": 1 = mag
"type": 2 = M3U
Good morning
you must delete the MultiStalkerPro.json file in etc/engnigma2 if it is there and redo it from your IP address: http://192.168.0.XX/multi-stalkerpro/portals
PS: don't forget to put the correct path for the MultiStalkerPro.json file in the settings. By default it is on: media/hdd
I finally figured it out, hmm... now I saw how I just have to copy and paste each one individually... no, but I know what I need to do. Good job, thank you all for your help...👍✌️
Dear Ziko,
Thanks a million for your outstanding job and sharing spirit.
Would you pleae diagnose why Multi stalker cannot connect to portal http://infinity-ott.com:8080 ? Using 1.2, ARM, Open PLi Develop
I tried both MAC and user/password both of the m stay stuck on 'Loading Providers'
Thanks so much in advance
Display MoreDear Ziko,
Thanks a million for your outstanding job and sharing spirit.
Would you pleae diagnose why Multi stalker cannot connect to portal http://infinity-ott.com:8080 ? Using 1.2, ARM, Open PLi Develop
I tried both MAC and user/password both of the m stay stuck on 'Loading Providers'
Thanks so much in advance
Try to change plugin cache from plugin setting
ATV/EGAMI/PURE
MIPSEL
Hi
am having problem install this on openatv 7.3 (Zgemma H5.2S). I put the ipk file in tmp folder and installed it and I got the following error:
opkg install /tmp/*.ipk
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
* calculate_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-multi-stalkerpro:
* libc6 (>= 2.39+git0+273a835fe7) * libc6 (>= 2.37) * libc6 (>= 2.37) * libc6 (>= 2.37) *
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
any idea why this is?
Ziko
Could you add another site for subtitles beside subdl
Hi
am having problem install this on openatv 7.3 (Zgemma H5.2S). I put the ipk file in tmp folder and installed it and I got the following error:
opkg install /tmp/*.ipk
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
* calculate_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-multi-stalkerpro:
* libc6 (>= 2.39+git0+273a835fe7) * libc6 (>= 2.37) * libc6 (>= 2.37) * libc6 (>= 2.37) *
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
any idea why this is?
Display MoreHi
am having problem install this on openatv 7.3 (Zgemma H5.2S). I put the ipk file in tmp folder and installed it and I got the following error:
opkg install /tmp/*.ipk
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
Not selecting libc6 2.37 as installing it would break existing dependencies.
* calculate_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-multi-stalkerpro:
* libc6 (>= 2.39+git0+273a835fe7) * libc6 (>= 2.37) * libc6 (>= 2.37) * libc6 (>= 2.37) *
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
any idea why this is?
opkg install --force-depends /tmp/*.ipk
opkg install --force-depends /tmp/*.ipk
thanks now I get the following error:
Installing enigma2-plugin-extensions-multi-stalkerpro (1.2+git101+263845c0+263845c171) on root.
* pkg_extract_data_file_names_to_stream: Failed to extract data.tar.* from package '/tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk'.
* pkg_get_installed_files: Error extracting file list from /tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk.
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
Display Moreopkg install --force-depends /tmp/*.ipk
thanks now I get the following error:
Installing enigma2-plugin-extensions-multi-stalkerpro (1.2+git101+263845c0+263845c171) on root.
* pkg_extract_data_file_names_to_stream: Failed to extract data.tar.* from package '/tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk'.
* pkg_get_installed_files: Error extracting file list from /tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk.
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
Seems you are trying to install wrong package.
What is your device model?
Display MoreDisplay Morethanks now I get the following error:
Installing enigma2-plugin-extensions-multi-stalkerpro (1.2+git101+263845c0+263845c171) on root.
* pkg_extract_data_file_names_to_stream: Failed to extract data.tar.* from package '/tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk'.
* pkg_get_installed_files: Error extracting file list from /tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk.
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
Seems you are trying to install wrong package.
What is your device model?
openatv 7.3 (Zgemma H5.2S) - MIPS
Display MoreDisplay MoreDisplay Morethanks now I get the following error:
Installing enigma2-plugin-extensions-multi-stalkerpro (1.2+git101+263845c0+263845c171) on root.
* pkg_extract_data_file_names_to_stream: Failed to extract data.tar.* from package '/tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk'.
* pkg_get_installed_files: Error extracting file list from /tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk.
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
Seems you are trying to install wrong package.
What is your device model?
openatv 7.3 (Zgemma H5.2S) - MIPS
Try this
Display MoreDisplay MoreDisplay Morethanks now I get the following error:
Installing enigma2-plugin-extensions-multi-stalkerpro (1.2+git101+263845c0+263845c171) on root.
* pkg_extract_data_file_names_to_stream: Failed to extract data.tar.* from package '/tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk'.
* pkg_get_installed_files: Error extracting file list from /tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk.
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
Seems you are trying to install wrong package.
What is your device model?
openatv 7.3 (Zgemma H5.2S) - MIPS
dont wast your time you need switch to atv 7.4
Display MoreDisplay MoreDisplay Morethanks now I get the following error:
Installing enigma2-plugin-extensions-multi-stalkerpro (1.2+git101+263845c0+263845c171) on root.
* pkg_extract_data_file_names_to_stream: Failed to extract data.tar.* from package '/tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk'.
* pkg_get_installed_files: Error extracting file list from /tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git101+263845c0+263845c171-r0_all.ipk.
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-stalkerpro.
Seems you are trying to install wrong package.
What is your device model?
openatv 7.3 (Zgemma H5.2S) - MIPS
There is no version for openatv 7.3
You should read the topic from the beginning
Don’t have an account yet? Register yourself now and be a part of our community!