new Oscam setup with c lines

There are 32 replies in this Thread which was already clicked 4,586 times. The last Post () by mapi.

    I also have openATV 7.3 image installed on my box (DM800SE). I see that you have the S4A updater plugin installed, which is a good plugin for many things. My recommendation is to uninstall the oscam emu you have and delete everything you have in the folder /etc /tuxbox /config /oscam-emu and leave the config folder empty. Oscams that are in the S4A updater plugin are old versions, so install this MOHAMED190S latest version (11791) via telnet command. You must have the Putty tool for installation. When the installation is finished, restart the box and copy the oscam configuration to the empty config folder. There is also oscam for all images, where you copy oscam for arm or mipsel architecture and other oscam configuration to certain folders depending on the image.



    Code
    wget -qO- --no-check-certificate "https://gitlab.com/MOHAMED_OS/dz_store/-/raw/main/Cam_Emulator/online-setup" | bash -s

    I did as you wrote, removed all previous oscam-emu settings. Downloaded and installed MOHAMED_OS 2.24.06-11791-801 and adjusted pasted conf files to the conf folder [i didn't create those from scratch but copied as per our previous conversation] and now it is etc/tuxbox/conf/ but nothing changes.

    pasted-from-clipboard.png


    snapshot from log while jumping through some channels:

    2024/06/17 23:05:56 00000000 (work) start reader thread action 13

    2024/06/17 23:05:56 00000000 (main) starting thread client work

    2024/06/17 23:05:56 00000000 (main) client work thread started

    2024/06/17 23:05:56 11B9F823 r (work) data from add_job action=13 client r emulator

    2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 1

    2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 2

    2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 3

    2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 4

    2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 5

    2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 6

    2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 7

    2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 8

    2024/06/17 23:05:56 267F4D63 c (dvbapi) New events occurred on 1 of 1 handlers after 492007 ms inactivity

    2024/06/17 23:05:56 267F4D63 c (dvbapi) Now handling fd 7 that reported event 17

    2024/06/17 23:05:56 267F4D63 c (dvbapi) Socket 7 reported hard connection close

    2024/06/17 23:05:56 267F4D63 c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...

    2024/06/17 23:05:56 267F4D63 c (dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 7)

    2024/06/17 23:05:57 00000000 (main) starting thread client work

    2024/06/17 23:05:57 00000000 (main) client work thread started

    2024/06/17 23:05:57 11B9F823 r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

    2024/06/17 23:05:57 00000000 (work) start reader thread action 13

    2024/06/17 23:05:57 00000000 (main) starting thread client work

    2024/06/17 23:05:57 00000000 (main) client work thread started

    2024/06/17 23:05:57 11B9F823 r (work) data from add_job action=13 client r emulator

    2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 1

    2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 2

    2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 3

    2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 4

    2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 5

    2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 6

    2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 7

    2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 8

    Still it doesn't work with your files but I have noticed the status page changed. Where on top 2 servers appeared and client on the bottom.

    pasted-from-clipboard.png


    In the meantime I have asked a colleague to check my c lines on his setup, he uses a bit older Zgemma box H9S SE but has working tv. I will let you know.


    Theoretically, in the webif if all is connected and working, is there any additional information visible? Last Channel / LB Value Reader / ECMs are updating?

    • Official Post
    Quote from tok4r

    I will let you know.

    Yeah, let us know.

    We`ve exhausted what else to try next.

    You still havn`t provided a log while viewing channels, even when it seems you have proxy readers/c lines connected.

    Pay attention to the live log while viewing channels, everything else is a distraction.

    If you can`t provide the log while viewing channels then its time to close this thread.

    But my previous post with log snapshot was taken while i was switching channels on my box. To clarify, I have copied it from Live Log tab while having show All set in settings.

    Or is there any other log or setting I should use?

    This is an example that you must have in oscam.log when you switch to a coded channel. Also in Webif you have the name of the channel, provider, caid , last channel as well as the ecm response time. I don't use loadbalance mode.



    • Official Post

    None of your logs show any channels being viewed.

    Quote from tok4r

    from Live Log tab while having show All set in settings

    Remove this "show all" setting.

    Restart oscam. copy the log at startup, zap a few channels then copy the log again.

    We don`t need an advanced log, just something basic to work with.

    If you don`t see a log similar to what Panda555 posted then i`m wondering is your tuner setup properly. Are you able to even watch free channels?

    Comparing the first line given by Panda555 I see a difference, and nothing beyond that. I don't see any channels at all.


    2024/06/19 22:21:08 535B844B c (client) plain dvbapi-client granted (dvbapi, au=auto (9 reader))

    2024/06/19 22:21:08 535B844B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache

    2024/06/19 22:21:08 535B844B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)

    So, servers were checked and are working. This mean that my box is not collaborating with oscam... Any idea what setup I should look for?

    Edited once, last by tok4r ().

    • New

    Maybe just upload a new image and start over. From what I know, multiboot H11.s has 4 image slots. So you don't even have to delete the current one, just upload a different image to the next slot and apply all the advice you received here

    • New

    An update, I gave my Zgemma to a friend for testing. He just plugged it in and all was working! So the problem looks like out of the oscam or box.


    Can this mean that my ISP is blocking and I should get a vpn on the box?

    Or I should do something with my tuner/antenna?

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login