I also have openATV 7.3 image installed on my box (DM800SE). I see that you have the S4A updater plugin installed, which is a good plugin for many things. My recommendation is to uninstall the oscam emu you have and delete everything you have in the folder /etc /tuxbox /config /oscam-emu and leave the config folder empty. Oscams that are in the S4A updater plugin are old versions, so install this MOHAMED190S latest version (11791) via telnet command. You must have the Putty tool for installation. When the installation is finished, restart the box and copy the oscam configuration to the empty config folder. There is also oscam for all images, where you copy oscam for arm or mipsel architecture and other oscam configuration to certain folders depending on the image.
new Oscam setup with c lines
-
- OSCam Configs
- CCcam To OSCam
- tok4r
- Closed
- Thread is marked as Resolved.
-
-
I did as you wrote, removed all previous oscam-emu settings. Downloaded and installed MOHAMED_OS 2.24.06-11791-801 and adjusted pasted conf files to the conf folder [i didn't create those from scratch but copied as per our previous conversation] and now it is etc/tuxbox/conf/ but nothing changes.
snapshot from log while jumping through some channels:
2024/06/17 23:05:56 00000000 (work) start reader thread action 13
2024/06/17 23:05:56 00000000 (main) starting thread client work
2024/06/17 23:05:56 00000000 (main) client work thread started
2024/06/17 23:05:56 11B9F823 r (work) data from add_job action=13 client r emulator
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 1
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 2
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 3
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 4
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 5
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 6
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 7
2024/06/17 23:05:56 00000000 (work) add reader job action 13 queue length 1 8
2024/06/17 23:05:56 267F4D63 c (dvbapi) New events occurred on 1 of 1 handlers after 492007 ms inactivity
2024/06/17 23:05:56 267F4D63 c (dvbapi) Now handling fd 7 that reported event 17
2024/06/17 23:05:56 267F4D63 c (dvbapi) Socket 7 reported hard connection close
2024/06/17 23:05:56 267F4D63 c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
2024/06/17 23:05:56 267F4D63 c (dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 7)
2024/06/17 23:05:57 00000000 (main) starting thread client work
2024/06/17 23:05:57 00000000 (main) client work thread started
2024/06/17 23:05:57 11B9F823 r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2024/06/17 23:05:57 00000000 (work) start reader thread action 13
2024/06/17 23:05:57 00000000 (main) starting thread client work
2024/06/17 23:05:57 00000000 (main) client work thread started
2024/06/17 23:05:57 11B9F823 r (work) data from add_job action=13 client r emulator
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 1
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 2
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 3
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 4
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 5
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 6
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 7
2024/06/17 23:05:57 00000000 (work) add reader job action 13 queue length 1 8
-
I still don't understand why it doesn't work. I will give you my configuration oscam.config and oscam.user, so copy it.
Something isn't good with your clines or didn't converted correct ( add reader job action )
-
Still it doesn't work with your files but I have noticed the status page changed. Where on top 2 servers appeared and client on the bottom.
In the meantime I have asked a colleague to check my c lines on his setup, he uses a bit older Zgemma box H9S SE but has working tv. I will let you know.
Theoretically, in the webif if all is connected and working, is there any additional information visible? Last Channel / LB Value Reader / ECMs are updating?
-
I will let you know.
Yeah, let us know.
We`ve exhausted what else to try next.
You still havn`t provided a log while viewing channels, even when it seems you have proxy readers/c lines connected.
Pay attention to the live log while viewing channels, everything else is a distraction.
If you can`t provide the log while viewing channels then its time to close this thread.
-
But my previous post with log snapshot was taken while i was switching channels on my box. To clarify, I have copied it from Live Log tab while having show All set in settings.
Or is there any other log or setting I should use?
-
This is an example that you must have in oscam.log when you switch to a coded channel. Also in Webif you have the name of the channel, provider, caid , last channel as well as the ecm response time. I don't use loadbalance mode.
Code
Display More2024/06/18 23:13:02 4C925E42 c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 8 2024/06/18 23:13:04 4C925E42 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1A32 PROVID: 000000 2024/06/18 23:13:04 4C925E42 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0B00 ECM_PID: 009A PROVID: 000000 2024/06/18 23:13:04 4C925E42 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 069B ECM_PID: 00D9 PROVID: 000000 2024/06/18 23:13:04 4C925E42 c (dvbapi) Demuxer 0 found 3 ECM pids and 2 STREAM pids in CA PMT 2024/06/18 23:13:04 4C925E42 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1830 PROVID 000000 ECMPID 1A32 ANY CHID PMTPID 021A VPID 0B1B 2024/06/18 23:13:07 4C925E42 c (ecm) dvbapi (P: 1830:000000:019C:1A32:0000: #ECM_L:8E #CW=39E6A3C283DFDA3C07207AA1D1C612A9 HOP:01): found (2533 ms) by xxxxxx (F/2/2/2) - Arena Sport 1 HD. 2024/06/18 23:13:09 406C106A r (emu) Key not found: N 1A 00 2024/06/18 23:13:09 406C106A r (emu) ECM failed: Key not found 2024/06/18 23:13:12 406C106A r (emu) Key not found: N DC 00 2024/06/18 23:13:12 406C106A r (emu) ECM failed: Key not found 2024/06/18 23:13:13 4C925E42 c (ecm) dvbapi (P: 1830:000000:019C:1A32:0000: #ECM_L:8E #CW=8EAE0F4B8ACC70C607207AA1D1C612A9 HOP:01): found (490 ms) by xxxxxx (P/2/2/2) - Arena Sport 1 HD. 2024/06/18 23:45:29 4C925E42 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 07E5 PROVID: 000000 2024/06/18 23:45:29 4C925E42 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 069B ECM_PID: 07F3 PROVID: 000000 2024/06/18 23:45:29 4C925E42 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B00 ECM_PID: 0806 PROVID: 000000 2024/06/18 23:45:29 4C925E42 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 091F ECM_PID: 0A3A PROVID: 000000 2024/06/18 23:45:29 4C925E42 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 0911 ECM_PID: 0A6C PROVID: 000000 2024/06/18 23:45:29 4C925E42 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 069F ECM_PID: 15F2 PROVID: 000000 2024/06/18 23:45:29 4C925E42 c (dvbapi) Demuxer 0 found 6 ECM pids and 2 STREAM pids in CA PMT 2024/06/18 23:45:29 4C925E42 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 091F PROVID 000000 ECMPID 0A3A ANY CHID PMTPID 00A8 VPID 010C 2024/06/18 23:45:29 406C106A r (emu) ECM failed: Not supported 2024/06/18 23:45:30 4C925E42 c (ecm) dvbapi (P: 091F:000000:0364:0A3A:0057: #ECM_L:B7 #CW=C7DBC1919ACE125D0000000000000000 HOP:01): found (187 ms) by xxxxxx (P/2/2/2) - Doku TV HD
-
None of your logs show any channels being viewed.
from Live Log tab while having show All set in settings
Remove this "show all" setting.
Restart oscam. copy the log at startup, zap a few channels then copy the log again.
We don`t need an advanced log, just something basic to work with.
If you don`t see a log similar to what Panda555 posted then i`m wondering is your tuner setup properly. Are you able to even watch free channels?
-
Comparing the first line given by Panda555 I see a difference, and nothing beyond that. I don't see any channels at all.
2024/06/19 22:21:08 535B844B c (client) plain dvbapi-client granted (dvbapi, au=auto (9 reader))
2024/06/19 22:21:08 535B844B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2024/06/19 22:21:08 535B844B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
-
I don't see any channels at all.
If you can`t see even free channels then the problem isn`t oscam, its your tuner setup.
-
So, servers were checked and are working. This mean that my box is not collaborating with oscam... Any idea what setup I should look for?
-
Maybe just upload a new image and start over. From what I know, multiboot H11.s has 4 image slots. So you don't even have to delete the current one, just upload a different image to the next slot and apply all the advice you received here
-
An update, I gave my Zgemma to a friend for testing. He just plugged it in and all was working! So the problem looks like out of the oscam or box.
Can this mean that my ISP is blocking and I should get a vpn on the box?
Or I should do something with my tuner/antenna?
-
Can this mean that my ISP is blocking and I should get a vpn on the box?
I think yes. Try this from your box:
-
So it is probably something with my atenna.
Thank you all for all the support, and this topic can be closed.
-
master G
Closed the thread.
OSCam Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!