Stuck on 49, and cant reflash. Tryed recoverusb but it stuck on furst option( start with flash in flashmemory( oatv7,4) Have tried different recovery usb and the recovery at the back with no luck. It sems like ip 192.168.1.14 is on,but I cant connect. Is my GB trio broke?
I am stuck on 49
-
- GigaBlue OpenATV
- leifen
- Thread is Unresolved
There are 9 replies in this Thread which was already clicked 451 times. The last Post () by rudicboban.
-
-
old image too ?, start to recovery menu and flash online the same ?
-
A reset button is hard to see at the back...
Power off
USB in with recovery image
Hold reset button down with ballpoint pen
Power on
-
When I try flash image pure 2 insted ,I get main meny multiboot selecter and cant change option it starts with atv and stuck at 49.
-
Download recovery_emmc.zip for your model receiver
In the extracted file you will see the following files:
- apploader.bin
- bootargs.bin
- fastboot.bin
- imageversion
- usb_update.bin
Copy the above 5 files directly to root of your USB stick.
Ensure your receiver is powered off and connect USB stick to USB port on your receiver.
Gigablue UHD Trio 4K hold down REAR reset button and power on while hold this down.
Once UPDT appears on front screen release reset button or power button, whichever applies to your receiver.
Once booted into the new recovery menu you will see the screen below.
Once completed your receiver will boot into your previously flash image. If the receiver gets stuck on boot it just means you need to flash a new image. Either way
NEW IMAGE HAS TO BE FLASHED.
Due to flash partion re-sizing you now need to flash a new image.
Power off, BUT ENSURE RECOVERY IMAGE FLASHING IS COMPLETED BEFORE POWERING OFF.
Download the image ZIP file for your receiver. Image zip file ends in simply 'mmc.zip'.
Copy the complete 'ZIP' file to root of USB stick, DO NOT UNZIP.
Gigablue UHD Trio 4K hold down REAR reset button and power on while hold this down. Once UPDT appears on front screen release reset button or power button, whichever applies to your receiver.Once booted into the new recovery menu you will see the screen below.
Select 'USB Multiboot Image Upgrade' > Press OK > You'll then see the following screen. At the top you will see the image zip file. In the field below you can select an eMMC slot to flash the image to. For this guide we are selecting Slot 1 where there is currently an OpenViX image installed. We will re-flash this slot. Select 'Start Upgrade' once ready and press OK.
Keep and eye for the Completed notice in screenshot below, appears for couple of seconds only. If miss it, simply press EXIT on your remote for the next step.
In the next screen select 'Multiboot Selector' and press OK.
Select image in STARTUP_1 and press OK, your receiver will now reboot. Flashing process is completed.
-
I will look if rear reset is stuck, because I cant select upgrade and cant flash image , When power on with usb image,mmc it start recovery meny insted and there is nothing possible
-
I bricked 3 resievers and I dont know what to do...
-
I brick my boxes all the time. My dinobot 4k went to heaven, but I dragged it back. It was reincarnated as an Anadol 4k.
Most others that are bricked aren't actually bricked. Its just working out what is wrong with them.
-
My box must have gone to haven too because there is no way to select multiboot upgrade, its stuck and not pssible to change altenativ.
Is it possible skip multiboot and flash the old way with force image after a delete flashmemory?
-
I got same problem open atv 6.1...black screen on sky de... and I instaled everything....
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!