Vu+ Solo 2 - No space left on device after update

There are 13 replies in this Thread which was already clicked 945 times. The last Post () by M7prod.

    I updated VIX on my Vu+ Solo 2 on Sunday night and it has since locked on the boot screen and I've been unable to reflash with a USB.
    Looked at memory and it seemed okay:


    root@vusolo2:~# cat /proc/meminfo

    MemTotal: 572400 kB

    MemFree: 477428 kB

    Buffers: 7460 kB

    Cached: 46132 kB

    SwapCached: 0 kB

    Active: 25604 kB

    Inactive: 33300 kB

    Active(anon): 5780 kB

    Inactive(anon): 60 kB

    Active(file): 19824 kB

    Inactive(file): 33240 kB

    Unevictable: 0 kB

    Mlocked: 0 kB

    SwapTotal: 0 kB

    SwapFree: 0 kB

    Dirty: 0 kB

    Writeback: 0 kB

    AnonPages: 5376 kB

    Mapped: 10176 kB

    Shmem: 536 kB

    Slab: 13888 kB

    SReclaimable: 3420 kB

    SUnreclaim: 10468 kB

    KernelStack: 768 kB

    PageTables: 916 kB

    NFS_Unstable: 0 kB

    Bounce: 0 kB

    WritebackTmp: 0 kB

    CommitLimit: 286200 kB

    Committed_AS: 168900 kB

    VmallocTotal: 509876 kB

    VmallocUsed: 16216 kB

    VmallocChunk: 482872 kB


    But then got an odd response when I tried opkg update telling me there's no space on the disk.
    root@vusolo2:~# opkg update

    * opkg_lock: Could not create lock file /run/opkg.lock: No space left on device.

    * opkg_cmd_exec: Command failed to capture privilege lock: No space left on device.

    root@vusolo2:~#


    Is there a telnet command to restore from backup? I've already consulted the Telnet thread but couldn't see anything,
    Is there a recovery image?
    What are my chances of unbricking the box?
    Any help appreciated.
    I think the box is on its last legs.


    Edit: Probably should have mentioned, I can get in with Putty and Filezilla. Just no access via the image UI and menus - which is why I am so screwed with it.

    Edited once, last by susifarber: More detail. ().

    • Official Post

    The output you posted was about RAM. The problem is flash memory. I.e storage.


    df -Th will show you what storage you have.


    You can use the willowbuild command to flash the image. You can then restore a different settings backup and avoid his customisation if you don't want them.


    Otherwise, you can stop Enigma2 using "init 4". Then delete the following possible overgrown files: picons, EPG, IPTV picons, IPTV EPG . That should get your box running.


    There is a command to flash on another forum. The link is on my signature on that forum. I will repost it here tomorrow evening unless someone does it before me.

    Many thanks for your support and suggestions. I persisted with ftechno's suggestion with an older version of VIx and dropped all plugins and settings. Obviously, not optimal solution but probably for the best as the box has been crashing more recently.

    abu baniaz I'll look at decluttering some more of the junk this evening.

    Yes, that's all I had access to. There were a couple of old logs (mid December) but nothing for the period in which the box was unstable. Picons and EPG are stored on USB - but IPTV picons, IPTV EPG are not.
    I guess sorting where they are stored would be the natural first step.

    Quote from susifarber

    Many thanks for your support and suggestions. I persisted with ftechno's suggestion with an older version of VIx and dropped all plugins and settings. Obviously, not optimal solution but probably for the best as the box has been crashing more recently.

    abu baniaz I'll look at decluttering some more of the junk this evening.

    If you want a best experience with solo2 for me i use 64gb usb stick with neoboot and i have fun with 10 images include 1_0_19_19CA_42_800_DCA0000_0_0_0_20250112224547.jpgopenvix the last version with last update

    Good evening I have the same problem on dm900. I can't install or delete a plug-in. No more space in my view. How can I delete it? Thank you for your help.



    Code
    opkg_lock: Could not create lock file/run/opkg.lock: No space left on device.

opkg_cmd_exec: Command failed to capture privilege lock: No space left on device.

    DM800SE V2 Openpli 4.0 OSCAM

    GN-CX8800 HD PLUS + IPTV

    Samsat 90 hd titan

    ?Dreambox 500s?

    ?Atlas 200s B128?

    ?RedLine M330 HD?

    • Official Post
    Quote from M7prod

    Good evening I have the same problem on dm900. I can't install or delete a plug-in. No more space in my view. How can I delete it? Thank you for your help.



    Code
    opkg_lock: Could not create lock file/run/opkg.lock: No space left on device.

opkg_cmd_exec: Command failed to capture privilege lock: No space left on device.

    If its not possible to remove anything from within the image menu, then it can be done with an FTP tool.

    Remove unused skins or plugins from these directories then reboot the DM900:

    Skins - /usr/share/enigma2

    Plugins - /usr/lib/enigma2/python/plugins/extensions/

    Quote from arthur22

    All these devices are obsolete nowadays, invest in something else and you will have no more problems....

    He has a DM900, its far from obsolete.

    CPU: Dual-Core 12K DMIPS

    2 GB RAM

    4 GB Flash

    Quote from M7prod

    Good evening I have the same problem on dm900. I can't install or delete a plug-in. No more space in my view. How can I delete it? Thank you for your help.



    Code
    opkg_lock: Could not create lock file/run/opkg.lock: No space left on device.

opkg_cmd_exec: Command failed to capture privilege lock: No space left on device.

    reinstall image, as these could be more due to the fact that the file is already there, I don't think that on such receivers, that are recent and have huge flash, you have no more space,


    TS

    Hello everyone, thank you for your response. My dm900 is great, it's Ferrari. I succeeded. I updated to 7.4 and it fixed the problem. I was able to delete what I wanted. Thank you all. Have a nice day.



    Here is the update I made

    Code
    who wants to try atv7.5 developer, we give the command from the telnet
Code
wget -O - -q https://feeds2.mynonpublic.com/devel-feed | bash

    DM800SE V2 Openpli 4.0 OSCAM

    GN-CX8800 HD PLUS + IPTV

    Samsat 90 hd titan

    ?Dreambox 500s?

    ?Atlas 200s B128?

    ?RedLine M330 HD?

    Edited 2 times, last by M7prod ().

    Sláinte 1

VU+ SOLO 2 PVR Ready Linux Enigma2 Receiver Full HD 1080p

Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login