Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild

NP cheers anyway. i will start again

Excellent tutorial. Went without a hitch.

Thanks guys.

@ thatfellow

waiting patiently for.....Section 5 [W.I.P]: Adding toolchains & compiling oscam for other devices

:rasta2bigsmoke0gf::rasta2bigsmoke0gf::rasta2bigsmoke0gf::rasta2bigsmoke0gf::rasta2bigsmoke0gf::rasta2bigsmoke0gf:

I got everytime an error, that the build can´t read the archive...chmod is 777, any ideas?

thanks for great tutorial, but i have this error when start oscam -b

"oscam: error while loading shared libraries: libusb-1.0.so.0: cannot open shared object file: No such file or directory", i'm using Ubuntu 12.04.5 LTS.
thanks for your help

thanks it works great on Linux mint 17 (ubuntu 14.04-1)

Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild

why do I only get oscam-svn1103 version when updating to the latest edition?
the final version should be oscam-svn1124!

ordinary oscam build is ok, I know it's come to 9924.
Here we are talking about compiling oscam with Modern Webif by Simplebuild!
it's just come to OSCam Trunk r9842 Timeline Modern r1103??

Ten Below
welcome back

Hi,

Problem with simplebuild update : bad request

what solution ?

thanks

Hi. Someone know is somthing exist for Centos distro?? Simplebuild seem doesn't work with this...
Thanks in advance

somebody kind...how to start simplebuild script once again..? I have compiled my oscam bin file and all...but would like to start simple build script again to get familiar with it, but no matter what i type in terminal, it will not start (have tried "./simplebuild menu" and "./simplebuild" and cd /opt -> cd simple build and more..but no succes :(

Hope someone can help me and others watching this thread... regards

@MG...F*cking super thanks mate... then i was only one millimeter off all the time :D

To all other LINUX-NOOB people...PLEASE LOOK ABOVE HOW TO START SIMPLEBUILD SCRIPT AGAIN..Master G has provided code!

Very nice this thread. I crosscompiled oscam for mipsel OE2.0 successfully by using this simplebuild script. But can not build oscam for openpli. The error information:

+-------------------------------------------------------------------------------
| OSCam ver: 1.20-unstable_svn rev: 10062 target: -ssl-libusb-pcsc
| Tools:
| CROSS = /opt/simplebuild/toolchains/openpli40/bin/mipsel-openpli40-linux-gnu-
| CC = /opt/simplebuild/toolchains/openpli40/bin/mipsel-openpli40-linux-gnu-gcc
| Settings:
| CONF_DIR = /etc/tuxbox/config
| CC_OPTS = -Os -ggdb -pipe -ffunction-sections -fdata-sections
| CC_WARN = -w
| CFLAGS = -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/usr/include/PCSC
| LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/usr/include/PCSC -Wl,-rpath,/lib -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/lib -L/opt/simplebuild/toolchains/openpli40/mipsel-openpli40-linux-gnu/sysroot/usr/lib
| LIBS = -lssl -lcrypto -lusb-1.0 -lrt -lpcsclite -lpthread -ldl -lrt
| UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_PCSC=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL HAVE_DVBAPI I*****_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK CLOCKFIX
| Protocols: CAMD33 CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM SERIAL CONSTCW PANDORA GHTTP
| Readers : NAGRA I***** CONAX CRYPTOWORKS SECA VIACCESS ********** DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STAPI STINGER SMARTREADER PCSCREADER
| Compiler :
| Binary : ../archiv/oscam-svn10062-openpli40-webif-ssl-libusb-pcsc
+-------------------------------------------------------------------------------
HOSTCC webif/pages_gen
GEN webif/pages.c
GEN Compressed 372908 template bytes into 156847 bytes. 216061 saved bytes (57.94%).
/opt/simplebuild/toolchains/openpli40/bin/mipsel-openpli40-linux-gnu-gcc: 1: /opt/simplebuild/toolchains/openpli40/bin/mipsel-openpli40-linux-gnu-gcc: Syntax error: "(" unexpected
Makefile:363: recipe for target 'build/-ssl-libusb-pcsc/cscrypt/des.o' failed
make[1]: *** [build/-ssl-libusb-pcsc/cscrypt/des.o] Error 2
Makefile:316: recipe for target 'all' failed
make: *** [all] Error 2

- - - Updated - - -

The problem is solved. The toolchain of openpli40 is for 64 bit CPU, so install a X86-64 ubuntu system and use this simplebuild can crosscompile the oscam for pli.

dialog installed
xz-utils installed
gawk installed
subversion installed
gcc installed
make installed
libusb-dev installed
libusb-1.0-0 ... is missing
libusb-1.0-0-dev installed
libssl-dev installed
libpcsclite-dev installed
libccid installed
libc6-dev installed
zlib1g-dev installed
build-essential installed
gcc-multilib installed
module-assistant installed
dos2unix installed
sshpass installed
openssl installed
#########################################

I am running ubuntu 14.04 server addition. can some one help me with this error

libusb-1.0-0 ... is missing

so FAR i have tried

sudo apt-get update&upgrdae

I have restart entire pc but no joy yet.

Please help.

- - - Updated - - -

some one please help as I am stuck on this case. I have google arround install some libusb dev etc......but no make diffrence

sunlight786

sudo apt-get install libusb-1.0-0

everytime i try to download simplebuild i get the following error below? any ideas?

Last login: Tue Jan 6 21:53:58 2015 from pc-pc.local
root@debian:~# wget ss4200.homelinux.com/oscam/simplebuild
--2015-01-06 22:02:33-- http://ss4200.homelinux.com/oscam/simplebuild
Resolving ss4200.homelinux.com (ss4200.homelinux.com)... failed: Name or service not known.
wget: unable to resolve host address `ss4200.homelinux.com'
root@debian:~#

- - - Updated - - -

ok...figured it out.

when you install debian you must manually enter the gateway address 192.168.1.1 into the etc/network/interfaces folder to gain internet access. this previously took me weeks to figure out previously.

- - - Updated - - -

now im faced with more problems.missing packages...

Need to get 49.4 MB of archives.
After this operation, 130 MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
libsvn1 linux-libc-dev libssl-dev libssl-doc subversion
E: There are problems and -y was used without --force-yes
_ _ _
___| |_ _ __ ___ __ _ _ __ ___ | |__ ___ __ _ _ __ __| |
/ __| __| '__/ _ \/ _` | '_ ` _ \| '_ \ / _ \ / _` | '__/ _` |
\__ \ |_| | | __/ (_| | | | | | | |_) | (_) | (_| | | | (_| |
|___/\__|_| \___|\__,_|_| |_| |_|_.__/ \___/ \__,_|_| \__,_|

file check
----------

dialog ... is not installed
xz is installed found in /usr/bin/xz
gawk ... is not installed
svn ... is not installed

package check
-------------

dialog installed
xz-utils installed
dpkg-query: no packages found matching gawk
gawk ... is missing
dpkg-query: no packages found matching subversion
subversion ... is missing
gcc installed
make installed
dpkg-query: no packages found matching libusb-dev
libusb-dev ... is missing
libusb-1.0-0 installed
dpkg-query: no packages found matching libusb-1.0-0-dev
libusb-1.0-0-dev ... is missing
dpkg-query: no packages found matching libssl-dev
libssl-dev ... is missing
libpcsclite-dev installed
libccid installed
dpkg-query: no packages found matching libc6-dev
libc6-dev ... is missing
dpkg-query: no packages found matching zlib1g-dev
zlib1g-dev ... is missing
dpkg-query: no packages found matching build-essential
build-essential ... is missing
dpkg-query: no packages found matching gcc-multilib
gcc-multilib ... is missing
dpkg-query: no packages found matching module-assistant
module-assistant ... is missing
dpkg-query: no packages found matching dos2unix
dos2unix ... is missing
dpkg-query: no packages found matching sshpass
sshpass ... is missing
openssl installed

root@debian:/opt/simplebuild# ./simplebuild menu

- - - Updated - - -

now faced with this prob!

──────────────────────────────────────────────────────────────────────────────

┌──────────────────────────────UPDATE_CHECK────────────────────────────────┐
│ _ _ _ │
│ ___| |_ _ __ ___ __ _ _ __ ___ | |__ ___ __ _ _ __ __| | │
│ / __| __| '__/ _ \/ _` | '_ ` _ \| '_ \ / _ \ / _` | '__/ _` | │
│ \__ \ |_| | | __/ (_| | | | | | | |_) | (_) | (_| | | | (_| | │
│ |___/\__|_| \___|\__,_|_| |_| |_|_.__/ \___/ \__,_|_| \__,_| │
│ │
│ checking online status of oscam SVN please wait... │
│ impossible. SVN is offline! │
│ checking local svn please wait... │
│ found revision: not found │
│ │
│ │
└──────────────────────────────────────────────────────────────────────────┘

./simplebuild: line 2979: [: too many arguments

it cant find any update and wont allow me run the standard version? any ideas???

I managed to install oscam

when trying to do section4 I am getting:

file check
 ----------




 dialog  ... is not installed
 xz               is installed  found in /usr/bin/xz
 gawk  ... is not installed
 svn              is installed  found in /usr/bin/svn




 package check
 -------------




 dialog  installed
 xz-utils  installed
 gawk  installed
 subversion  installed
 gcc  installed
 make  installed
 libusb-dev  installed
 libusb-1.0-0  installed
 libusb-1.0-0-dev  installed
 libssl-dev  installed
 libpcsclite-dev  installed
 libccid  installed
 libc6-dev  installed
 zlib1g-dev  installed
 build-essential  installed
 gcc-multilib  installed
 module-assistant  installed
 dos2unix  installed
 sshpass  installed
 openssl  installed

and when typing ./simplebuild menu command I am getting:

./simplebuild: line 258: awk: command not found
./simplebuild: line 258: awk: command not found
./simplebuild: line 258: awk: command not found
grep: simplebuild.config: No such file or directory
grep: simplebuild.config: No such file or directory
grep: simplebuild.config: No such file or directory
grep: simplebuild.config: No such file or directory
grep: simplebuild.config: No such file or directory
./simplebuild: line 3011: --no-cancel: command not found
root@debian:/opt/simplebuild.modern#

ss4200.homelinux.com/ is down for me

Now OK again!