Secondstage Bootloader for Clone dm800se Sim2

There are 9 replies in this Thread which was already clicked 17,991 times. The last Post () by Inspiral.

    dm800se

    dreambox-secondstage: update dm800, dm800se, dm500hd, dm8000 2nd stage loaders
    dm8000: compatibility for other 256MB flash chips (EOL of old type)
    dm800, dm800se, dm500hd: added enhanced flash error correction (only used with new firmware images)

    Code
    http://sources.dreamboxupdate.com/opendreambox/1.6/dm800se/experimental/dm800se/dreambox-secondstage_84-r0_dm800se.ipk



    THIS SSBL IS FOR GENUINE DREAMBOX RECEIVERS ONLY DO NOT USE ON CLONE MACHINES.

    OpenViX on Twitter @0penViX

    New secondstage bootloader ssl84 for dm800se from sim2


    sim2 announced release of sim2-ssl-84-dm800se today according to the plan of continuous support for sim2 dreambox users.
    This great development is one of steps to achieve ability of users to enjoy latest images with latest original drivers.
    sim2 also announced that work in progress to release ssl-84 for other sim2 dreambox models.



    new ssl-84 is used as following


    To use new ssl with original images:
    -Flash new ssl-84 nfi to dreambox by internet explorer or dreamup(this used once if the current dreambox bootloader is ssl82 or older)
    -Flash original image as usual
    -Flash ssl-84 nfi to dreambox again and before rebooting the dreambox


    This method may not apply to few images like latest releases of edg nemesis and oozoon and better to use already patched images with new ssl built in


    To use sim2 patched images with new ssl 84
    if the dreambox has old ssl 82 bootloader,flash new ssl-84 nfi first by internet explorer or dreamup then flash sim2 image
    if new ssl84 already flashed to dreambox just flash the sim2 image by usual method


    with the new ssl ,original drivers and most recent releases of plugins are working without modifications with exception of few plugins like webinterface and software manager may need to apply available specific patches.



    To take backup for the flash image with integrated new ssl we advice to use TSFlashBackup v 2.0
    To install and to make backup of barry allen multiboot image we advice to use sim2-barryallen v 2.0

    Do Not Send PM For Support
    Ask Your Question On The Forum

    • Official Post

    sim2 dm800se ssl84b


    Code
    -used only with original drivers 9-11-2011
    -nfi,bin and ipk files are attached
    -better to use already prepared images with new ssl
    all latest images with the new ssl will be available soon



    Thanks mfaraj57 and sim2 team

    • Official Post

    DM800se sim2 84d bootloader


    Sim2 released new boot loader for dm800se!
    ssl84d contains a fix for OpenPli 3.0/4.0 images so no kernel modification is needed in order to make the drivers working in OpenPli.
    The rest stays the same for dmm based images, TPM removal still needed!
    The new boot-loader used only with original dreammultimedia drivers 01102013.
    Attached nfi and bin format for the loader.
    Thanks fly out to the Sim2-Team for their continuous support for all sim products !


    Thx Bassie for uploading

    Hello

    can you please provide with latest bootloader for dm800 SE sim2 ?? for oe 2.0.. thanks mate

    here you go


    sim2_800SE_SSL84D.rar

    If my post helps hit the Thanks ;-)

    Like 2

  • master G

    Added the Label Bootloaders

  • master G

    Changed the title of the thread from “Latest Secondstage Bootloader For SIM2 TEAM for clone Dm800se & SIM2.10 card” to “Secondstage Bootloader for Clone dm800se Sim2”.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login