OpenPLi 4.0 DM800HDse Japhar

link not working

https://mega.nz/#!kE0D0ZDS!V80…K-pXhYSPMlHDAgAgflPsvMftA

Here is new one.

che ssl bisogna avere?

correggo ssl87f.

For this image which is still in beta stage you need to flash ssl84 j bootloader in your box and this image is for those who have Japhar NC3 sim card installed in box.This card also support all ferrari old images like those with ssl87f bootloader.Japhar card will automatically adapt itself to the image "ferrari" or "japhar".

PLEASE Does it work for this version DM800SE ferrari or not ??

Hello I have this installed on my decoder Nemesis2.6-dm800se-svn107r5-20120420-ssl87F-kobra s.
I install this OpenPLi_4.0_Japhar_DM800HDse_wIPTV_BETA4-OS
if so what steps I need to do. Thank you

OpenPLi 4.0 for DM800HD SE with IPTV and GStreamer 1.6.2 released.Thanks to Masta G.

- Gstreamer (v1.6.2) has been updated to master git which carries many fixes.
- No more internet connection required during bootup.
- Feeds online for online update of image and future updates/fixes if necessary.
- IPTV List and Jam Panel are now pre-shipped.
- Japhar Addon Manager 5.2 included.
- IPTV List built-in with 750+ IPTV FREE Channels.
- Many dvbmediasink fixes.

https://mega.nz/#!UZ0DHQTb!yq7DdwWk_rQyL7TKXPVGiB_7-V9XM4LQ5qKwxXWPaSg

Enjoy !

Japhar Team / ToySoft / WarLord.

DM : OpenPLi 4.0 with IPTV (More than 800+ IPTV FREE Channels) by MastaG and Japhar Team

Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!

Changes since previous release:

- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

To find the download link, search for MastaG Japhar OpenPLi 4.0

Enjoy !

same everywhere been removed from some

Some forums doesn't want the links, so instead of being banned, I just announce the image and forums who accept links will get them,

Here latest,

Emo

Changes :
- Gstreamer 1.7.1
The mp4 playback from remote urls has been fixed upstream so no more revert for that.
libsoup http-handler has been updated so also no revert for that as well
- New libsoup handler for http urls
- New winter logo
- More free space laugh
Ive added a dirty hack that will upx compress the binary before package_write_ipk
We now have 2 to 3MB more free space (very nice, great success)
- New xvid/divx5 bitstream unpacker by mx3L, this should fix avi files with wrong fourcc
- The usual batch of dvbmediasink fixes by christophecvr and mx3L
- Wifi drivers have been refactored a bit, I dont auto-load the rt7777 anymore.
it should kick in when you plugin your wifi stick.
If not then Ill create a ppanel which will allow you to choose which driver you want to use: rt3070, rt55xx or rt7777 (since they cant be loaded at the same time)

by MastaG

DM8000HD: https://mega.nz/#!YRklVADa!jfV…Fs9-MdezwoUzLFubOFmA7VCAg

DM800HDse : https://mega.nz/#!BAtCwQ4R!r15…7CZvaK5SOaenDNfLsp9CQBYbU

DM800HD : https://mega.nz/#!kYlVHRoD!pWu…dvNgPFs4-rj6iGabO8Dk77bno

DM500HD : https://mega.nz/#!VMcAyQwC!Z4C…s3KUQWp0Z88GSS8MW90MLYBkc

Feel free to post images on all your satellite forums you like and share with all your friends these excellent tools and new images with full IPTV support, the best around, even better than on original boxes !!! Thank you !

Changes since last release:
- gstreamer upgraded to 1.7.90 (nearing the final 1.8 release)
- ffmpeg updated to 3.0
- gstreamer1.0-libav is now build against ffmpeg (thx to Taapat).
- a patch from mx3L for servicemp3 that should speed up IPTV zapping
- a second patch from mv3L for servicemp3 that should fix a possible GSOD when switching audio tracks
- a third patch from mx3L for the dvbmediasink that should fix a possible GSOD on seeking in mp4 streams
- support for bluray isos by Taapat
- remote controls should now have their media-button working
- added X Solo Mini 3 build
- New vermagic magics, you should be able to load any kernelmodule again.
- patch by christophecvr for setting the debug level in Menu -> Settings -> User-interface settings.

Note :
The patch for setting the debug level is very important since it fixes many possible IPTV issues on slower receivers like the DM800.
Its highly recommended to set it level 0 :)

- MEGA DM8000HD+ Japhar SSL84J :
https://mega.nz/#!dENQEIpT!Kj1…doqQWLsFdBVozoxsHnm4tjoNE
- MEGA DM800HDse+ Japhar SSL84J :
https://mega.nz/#!FRMRAAhA!UVp…oS1OOto-sgru0KvEFNbgNMqRg
- MEGA DM800HD+ Japhar SSL84J :
https://mega.nz/#!FZVQnTJT!BoU…mLjf9VTuvf_ZBnqT5w-TFFIZE
- MEGA DM500HD+ Japhar SSL84J :
https://mega.nz/#!BFMkkS7S!g9B…ZXOb4cBcafy3vPuBljxXwnM0s

OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16)

Changes:
- Gstreamer 1.8.0 stable release
- New PLi spring logo
- Upgrade OpenVPN to 2.3.8
- Upgrade OpenSSH to 7.1p2
- Upgrade OpenSSL to 1.0.2g
- Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore
- Upgrade Japhar-IPTV list to 1.6
- Upgrade rtmpdump from oe-alliance and let it provide librtmp as well
- Upgrade ffmpeg to 3.0.1
- Patch for dvbmediasink from mx3L for writing PTS on every PES header
This could possible fix some m3u8 streams freezing
- Removed the patch for dvbmediasink which should fix seeking in some mp4 streams
Since I couldn't reproduce the problem
- Rewrote Dreambox kernel recipes which should fix certain models not booting
- Fixed CrossEPG
- Fixed very large Packages.gz on the server
- Merged latest openpli-oe-core changes
- Merged latest OpenPLi enigma2 changes
- Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch
Emulating PowerVU should now work for multiple pids
- Lots of stuff I forgot...

DM800HDse+ : https://mega.nz/#!MENwRaDb!AsZ…BzZbsVfuXBhxNqWFWFnzz0gLA

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1200 FREE IPTV Channels and with GStreamer 1.9.0.1 (April 15th 2016)

Changes:

- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed

DM800HDse+ : https://mega.nz/#!AwhlABgI!47L…vBMCAKEavrTiTBmgGQhBiK3jU

link not working any help thanks
got download from this link https://mega.nz/#!AwhlABgI!47L…vBMCAKEavrTiTBmgGQhBiK3jU

thanks

Use this one. It's the same but using the correct encoding. Copy paste it in your browser.

https://mega.nz/#!AwhlABgI!47Lh28i8HD8aduGDkqvBMCAKEavrTiTBmgGQhBiK3jU

VU+/DM Japhar OpenPLi 4.0 IPTV image from MastaG, 1300 Free IPTV Channels

Here s a new batch of images based on OpenPLi 4 with many contributions from various openpli.org forum members and some bits taken from oe-alliance.

So this is basically a tribute to them

IMG01

It took me a while since I was very short on time and I had to re-install my build-rig, move to a new feed-server etc...

SO DUE TO A NEW FEED-SERVER ONLINE UPDATE FROM PREVIOUS IMAGES IS NOT POSSIBLE!
DON T TRY TO CHANGE THE URL IN THESE OLD IMAGES SINCE THERE S BEEN TOO MANY CHANGES WHICH WILL BREAK THINGS!
PLEASE FLASH A CLEAN IMAGE INSTEAD!

So here s whats up:
- Brand new bootlogo thanks to .:MarcinO:.
- OpenPLi enigma2 rev: 4bf2f1e45593065f9e2b4563f30463487b727c94
- OpenPLi oe-core rev: d76cfe6a39c6613ac77578840b214f0f1e748a39
- Taapat s Fulan enigma2 rev: 2a984c500f5b2ea657f68742b7dc4e47f5586483
- New receivers supported:
* osmini
* osminiplus
* spycat
* spycatmini
* et7000mini
* xpeed lx
* xpeed lx pro

- New feed server located in Europe thanks to the Japhar team!
- New Japhar IPTV list
- No more use of UPX compression on ARM platform (should fix the Vu+ Solo 4K build)
- Latest gstreamer 1.9 revision from master branch
- FFmpeg 3.0.2 with extra options enabled (based on oe-e recipe)
- Kodi 16.1 for Vu+ Solo 2, Solo Se, Duo 2, and Solo 4K (thanks to mx3L for his bsp + recipes)
- More wifi drivers (mt7601, rt7777 etc..) taken from oe-alliance
- Slightly newer v4l modules for kernel 2.6.18 (dm800)
- New version of mx3L s serviceapp now supports EPG and embedded subtitles
- New version of exteplayer3
- Flash extender PPanel for dm800, dm800se and dm500hd (* Please read below)
- Many other changes I forgot to mention...

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didn t found the cause yet.
It is not related to the dvbmediasink since it doesn t happen on mips receivers and the code in the dvbmediasink didn t change.
Configure your streams to play with exteplayer3 instead, read below.

- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

- DM800 first boot will take a while, please be patient. The next boot will be faster.

Flash extender for DM800, DM800Se and DM500HD:
Since these receiver only feature 64MB of internal flash space, I ve been unable to ship all packages.
ffmpeg, exteplayer3, gst1.0-libav, mediaplayer2, iptv player, subssupport etc.. are missing due to insufficient space.
That s why I ve created a simple PPanel script for moving the entire internal flash to an external storage device such as internal hdd or usb disk.
The PPanel will also install all the missing packages for you.
So you can have all the bells and whistles like the other receivers

IMG02

However please note that:
- It will format your storage device thus deleting everything.
- It s not compatible with other flash-extenders such as barry alen, multiboot etc...
- You ll need a working internet connection when running the PPanel or else it cannot install the missing packages.
- You need to patient! As the script runs you ll only see a black screen which an take up to 15 minutes depending on the size/speed of your storage device and your internet connection.

You can find it under Blue Panel -> PPanels

ServiceApp and exteplayer3:
Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does :)

In a nutshell here s how it works.
In your /etc/enigma2/ directory you have your channel bouquets with the .tv and .radio extensions.
Inside these files there s this for example:

#SERVICE 4097:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8:DJING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

By default this will play with the gstreamer dvbmediasink (which is currently broken for sh4).
If you like to play your stream with exteplayer3 instead you should change the 4097 to 5002, like this:

#SERVICE 5002:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8:DJING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

You can also change it to play with gstplayer using 5001:

#SERVICE 5001:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8:DJING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

So it s like this:
4097 = default player, which is the dvbmediasink if serviceapp is not enabled
5001 = gstplayer
5002 = exteplayer3

Now let s say you d like to convert your entire bouquet to play with exteplayer3, simply login to your receiver with telnet/ssh (use PuTTY for Windows).
And issue to the following commands:
First stop enigma2:

init 4

Then change your bouquet to make all streams play with exteplayer3, lets say userbouquet.favourites.tv:

cd /etc/enigma2
sed -i s/^#SERVICE 4097/#SERVICE 5002/g userbouquet.favourites.tv

Then restart enigma2:
init 3

That s it !

You can also make exteplayer3 the default backend for playing back everything.
Go to Menu -> Plugins -> ServiceApp and set exteplayer3 as default.

Keep in mind that with exteplayer3 or gstplayer as default backend you will not have support for external subtitles yet (.srt for example).

That s why I ve added MediaPlayer2 and SubsSupport from mx3L.

Please thank mx3L for the hard work he put into this

- Japhar

DM800HDse+ : https://mega.nz/#!nVQFSKbL!Zeb…CV1CV8KcyDKgr295oOS7u9OnM