How to make and change an Enigma2 splash screen!

**G_ogi** · Dec 4th 2015

How to make and change the splash screen!

- first you need a picture in .bmp format (picture.bmp).
- it has to be im format 720x576 und 24 bit.

- if we have it, it's need to be renamed in splash_cfe_auto.bin
(just rename* the picture.bmp in to splash_cfe_auto.bin) (like this is wrong: splash_cfe_auto.bin.bmp)

- copy the file to an empty USB stick FAT32 formatted in the following folder, depending on the box:
/vuplus/your box/
(example: /vuplus/solose/splash_cfe_auto.bin)

- now you can flash it on your box - the same way, like you are flashing images

*If you can't rename the .bmp into .bin :

Quote

To show file name extensions in Windows Explorer, follow these steps:
For Windows Vista, Windows 7, and Windows Server 2008

Start Windows Explorer, you can do this by opening up any folder.
Click Organize.
Click Folder and search options.
Click the View tab.
Scroll down until you notice Hide extensions for known file types, un-check this line by clicking the check box.
Note To hide file name extensions, check this line.
Click OK

Display More

**robijay** · Dec 5th 2015

Black Hole use the 720x480 format.

**G_ogi** · Dec 5th 2015

VTi use the 720x576 format!

**master G** · Dec 22nd 2015

I use this to convert a jpg/logo to BMP format -> Online Image Converter

Renamed the .bmp file to splash_auto.bin then copied it into the vuplus/receiver folder.

Flash the splash the same way you would flash the image/firmware -> To install a new image on VU+

I found the best size for OpenViX is 700 x 480 pixels, OpenATV 700 x 470 and for OpenSPA 700 x 450 . I used the tool Paint to resize the .bmp file..

I`ve attached the ready made folder/directory structure for flashing the splash logo on Vu+ receivers..

homar1 · Oct 17th 2016

Hi,
This procedure applies only to VU plus.
Instead for DM800 OE2.0 image how to proceed to change the splash screen?
Thank you

**master G** · Oct 19th 2016

Quote from homar1

Hi,
This procedure applies only to VU plus.
Instead for DM800 OE2.0 image how to proceed to change the splash screen?
Thank you

Dreambox doesn`t use a splash screen, it uses a bootlogo. Use this tool -> Xorion BootLogo Maker

Steviesoitis · Oct 28th 2016

trying to do this on a mutant hd51 with no luck, what should the correct folder layout for the hd51 be? when im flashing an image its just /hd51 but that doesnt work for the splash. iv tried /mutant/hd51 still nothing

**master G** · Oct 28th 2016

Steviesoitis I don`t think the mutant hd51 uses one. I`ve had a look at all the images / firmware that`s available and none of them have a splash file.. If it did use one it should be in /hd51 folder..

Steviesoitis · Oct 31st 2016

Ok thanks ,when I add my custom boot.mvi it still shows the image boot screen after it shows my boot mvi if that makes sense, that's why I thought I also needed to change the splash.

**master G** · Oct 31st 2016

Quote from Steviesoitis

Ok thanks ,when I add my custom boot.mvi it still shows the image boot screen after it shows my boot mvi if that makes sense, that's why I thought I also needed to change the splash.

That could be the backdrop.mvi or bootlogo_backdrop.mvi..

taree · Jan 23rd 2019

as size is mention 700 and 740 pixels

any other way to create a full hd splash-auto.bin?

smnldo · Dec 23rd 2019

I restore splash screen logo.

Only size format 720 x 480 works On VU+ZERO.

When I try 720x576, the screen is black only.

pandox · Apr 8th 2020

Hello, On zgemma h9twin reciver how to replace first logo OPEN ATV . Which directory is the replacement file in?

TRS55 · Jul 10th 2020

openpli7.3 did not happen, whatever i did, could you help me again tsk

teak-won-do · Jul 10th 2020

I tryed this with OpenPli and OpenATV>>>To change the 1.Start / Bootlogo.jpg use the following procedure:

Via FTP >>> DCC >>> Telnet >>> rw, compr = none >>> reboot

Then via FTP >>> DCC >>> / etc / fstab >>> / dev / mtdblock2 / boot jffs2 rw, compr = none >>> enter >>> save >>> reboot

Then change under /boot>>>bootlogo-dm8000.jpg>>>reboot

Bootlogo size:4139b93250eba6efe62a5632a.png

paryssoul · Dec 22nd 2020

Quote from teak-won-do

I tryed this with OpenPli and OpenATV>>>To change the 1.Start / Bootlogo.jpg use the following procedure:

Via FTP >>> DCC >>> Telnet >>> rw, compr = none >>> reboot

Then via FTP >>> DCC >>> / etc / fstab >>> / dev / mtdblock2 / boot jffs2 rw, compr = none >>> enter >>> save >>> reboot

Then change under /boot>>>bootlogo-dm8000.jpg>>>reboot

Bootlogo size:4139b93250eba6efe62a5632a.png

Display More

Hi teak-won-do,

Can you pls tell me with on which version of OpenATV it works? I mean I can change bootlogo's up to version 6.3. In 6.4 I can change second bootlogo too, however there is a FIRST bootlogo (correct me if I'm wrong - called splash) which I cannot change in any way... And it is only in OTV 6.4. I enclose picture of it. I assume changing procedure should be as for splash? Does anyone knows a USB stick folder structure to flash a splash for OpenATV ver 6.4 on Opticum 4KBOXHD60?

Pls advice as this first bootlogo drives me crazy.

Looking forward for your feedback

toni185 · Jan 16th 2021

Quote from teak-won-do

I tryed this with OpenPli and OpenATV>>>To change the 1.Start / Bootlogo.jpg use the following procedure:

Via FTP >>> DCC >>> Telnet >>> rw, compr = none >>> reboot

Then via FTP >>> DCC >>> / etc / fstab >>> / dev / mtdblock2 / boot jffs2 rw, compr = none >>> enter >>> save >>> reboot

Then change under /boot>>>bootlogo-dm8000.jpg>>>reboot

Bootlogo size:4139b93250eba6efe62a5632a.png

Display More

I have Optibox Evo HD aka Odinm7, I changed bootlogo, which is same as backdrop and boot_wait.. and I run openpli 4,, but soon as I start says RUN and openatv splash screen is on, i didnt find fstab directory in total commander on my box..

DrAlves · Apr 12th 2021

Quote from toni185

Quote from teak-won-do

I tryed this with OpenPli and OpenATV>>>To change the 1.Start / Bootlogo.jpg use the following procedure:

Via FTP >>> DCC >>> Telnet >>> rw, compr = none >>> reboot

Then via FTP >>> DCC >>> / etc / fstab >>> / dev / mtdblock2 / boot jffs2 rw, compr = none >>> enter >>> save >>> reboot

Then change under /boot>>>bootlogo-dm8000.jpg>>>reboot

Bootlogo size:4139b93250eba6efe62a5632a.png

Display More
I have Optibox Evo HD aka Odinm7, I changed bootlogo, which is same as backdrop and boot_wait.. and I run openpli 4,, but soon as I start says RUN and openatv splash screen is on, i didnt find fstab directory in total commander on my box..

Display More

Hi! I have the same problem! Anyone can help? Thanks

jaro1970 · Jan 15th 2023

splash_auto.bin VU+ Duo4Kse proszę

How to make and change an Enigma2 splash screen!

Participate now!

Share

Tags