00 4E49C5BD27FF45
Posts by Youchie
-
-
01 : BB 1F 28 39 D6 D0 45 ====> NEXT Key
-
Hi All
I have a working oscam binnary patched to support TNTSAT & FRANSAT emu on my ubuntu server. the only problem is that im stuck on r11862 build.
My question is: is there anyone who could help us to extract the patch to be able to apply it to the most recent versions.
Cheers and best regards.
you can not extract a binary file
unless you have access to the source patch
because oscam.bin file compressed with upx when compiled
-
Code
Display MoreS: stapi1 pmt0_0.tmp S: stapi1 pmt0_1.tmp S: stapi1 pmt0_2.tmp S: stapi1 pmt0_3.tmp S: stapi1 pmt0_4.tmp S: stapi1 pmt0_5.tmp S: stapi1 pmt0_6.tmp S: stapi1 pmt0_7.tmp S: stapi1 pmt0_8.tmp S: stapi1 pmt0_9.tmp S: stapi1 pmt1_0.tmp S: stapi1 pmt1_1.tmp S: stapi1 pmt1_2.tmp S: stapi1 pmt1_3.tmp S: stapi1 pmt1_4.tmp S: stapi1 pmt1_5.tmp S: stapi1 pmt1_6.tmp S: stapi1 pmt1_7.tmp S: stapi1 pmt1_8.tmp S: stapi1 pmt1_9.tmp S: stapi1 pmt2_0.tmp S: stapi1 pmt2_1.tmp S: stapi1 pmt2_2.tmp S: stapi1 pmt2_3.tmp S: stapi1 pmt2_4.tmp S: stapi1 pmt2_5.tmp S: stapi1 pmt2_6.tmp S: stapi1 pmt2_7.tmp S: stapi1 pmt2_8.tmp S: stapi1 pmt2_9.tmp S: stapi1 pmt3_0.tmp S: stapi1 pmt3_1.tmp S: stapi1 pmt3_2.tmp S: stapi1 pmt3_3.tmp S: stapi1 pmt3_4.tmp S: stapi1 pmt3_5.tmp S: stapi1 pmt3_6.tmp S: stapi1 pmt3_7.tmp S: stapi1 pmt3_8.tmp S: stapi1 pmt3_9.tmp S: stapi1 pmt4_0.tmp S: stapi1 pmt4_1.tmp S: stapi1 pmt4_2.tmp S: stapi1 pmt4_3.tmp S: stapi1 pmt4_4.tmp S: stapi1 pmt4_5.tmp S: stapi1 pmt4_6.tmp S: stapi1 pmt4_7.tmp S: stapi1 pmt4_8.tmp S: stapi1 pmt4_9.tmp I: 170A:000000 ;OSN I: 170B:000000 ;OSN I: 1709:000000 ;OSN I: 0690:000000 ;Orange Sk I: 0100:003315 ;csat seca I: 0100:003311 ;csat seca I: 1863:003343 ;csat I: 0500:032A00 ;Orange Polska I: 098C:000000 ;SKY_DE I: 0952:000000 ;Telekom Romania I: 06F8:000000 ;D-SMART I: 1861:000000 ;Polsat I: 1708:000000:02C2 ;Aflam 1 I: 1708:000000:02C4 ;Aflam 2 I: 1708:000000:02C5 ;Cinema I: 1708:000000:030C ;Hekayat Kaman HD I: 1708:000000:02BF ;Hekayat I: 1708:000000:02C1 ;Hekayat2 I: 1709:000000:02C2 ;Aflam 1 I: 1709:000000:02C4 ;Aflam 2 I: 1709:000000:02C5 ;Cinema I: 1709:000000:02BF ;Hekayat I: 1709:000000:02C1 ;Hekayat2 I: 1709:000000:030C ;Hekayat Kaman HD I: 0500:23800,40810:4331 ;SRF 1 HD I: 0500:23800,40810:4332 ;SRF zwei HD I: 0500:23800,40810:4333 ;RTS Un HD I: 0500:23800,40810:4334 ;RTS Deux HD I: 0500:23800,40810:4335 ;Test17205 I: 0500:23800,40810:36E3 ;RSI La 1 HD I: 0500:23800,40810:36E4 ;RSI La 2 HD I: 0500:23800,40810:1260 ;3+ Schweiz I: 5604:000000:0066 ;AFN|prime Atlantic I: 5604:000000:0067 ;AFN|news I: 5604:000000:0068 ;AFN|sports I: 5604:000000:0069 ;AFN|prime Pacific I: 5604:000000:006A ;AFN|spectrum I: 5604:000000:006B ;AFN|sports 2 I: 5604:000000:006C ;AFN|family I: 5604:000000:006D ;AFN|movie I: 5604:000000:0192 ;AFN|Bars;Tone I: 5604:000000:0191 ;AFN|Reaper (EPG Video) I: 0100:003317 I: 0500:032940 I: 0500:032920 I: 0500:043330 I: 0500:040f40 I: 1863:003342 I: 06ED:000000 ###Priority##### P: 0500:030B00 ;TNTSAT P: 0500:042820 ;Canal+ France P: 1811:003315 ;CanalSat P: 1811:003311 ;CanalSat P: 0500:041950 ;FRANSAT P: 0500:050800 ;SRG SSR P: 0100:00006D ;TeleSat P: 1810:000000 ;Canal+ esp P: 09C4:000000 ;SKY_DE P: 1708:000000 ;OSN P: 091F:000000 ;Total Tv Serbia P: 092F:000000 ;Telekom Romania P: 092B:000000 ;D-SMART P: 1802:000000 ;Nos,DIGI TV P: 0609:000000 ;Orange Sk P: 1815:000000 ;UPC Direct Hungary P: 0D95:000010 ;ORF Digital P: 0100:00006A ;Canal Digitaal NL P: 1882:000000 ;Slovak Telecom P: 1884:000000 ;Polsat p: 0B01:000000 ;Polsat P: 0100:000068 ;cyfra P: 0100:000000 ;NC+ (Seca) P: 0D96:000004 ;M7 Group P: 1818:000000 ;M7 Group P: 0100:00006C ;TV Vlaanderen P: 4AEE:000000 ;Bulsatcom P: 5581:000000 ;Neosat P: 1830:000000 ;Max TV,HD+ P: 183D:000000 ;Tivusat P: 0604:000000 ;Nova Greece P: 0B00:000000 ;Canal Digital Nordic,DigitalALB,Antiksat,Kabelkiosk,Telekarta P: 0963:000000 ;Sky Digital P: 0650:000000 ;Austria plus P: 0D96:000000 ;SKY LINK P: 0D97:000004 ;UPC Direct Hungary P: 1843:000000 ;HDPlus P: 0B02:000000 ;Focus Sat Moldova 0.8w P: 0500:050C00 ;Ntv+_(56E) P: 0930:000000 ;Yes P: 090D:000000 ;Yes P: 0604:000000:02C2:0136:00CC ;ART Aflam P: 0604:000000:02C4:0138:00CD ;ART Aflam2 P: 0604:000000:02C5:013A:009C ;ART Cinema P: 0604:000000:030C:013B:0020 ;Hekayat Kaman HD P: 0604:000000:02BF:0130:0020 ;ART HekayAt P: 0604:000000:02C1:0134:0020 ;ART HekayAt2 P: 183E:000000 P: 1856:000000 P: 2600:000000 ;BISS P: 0E00:000000 ;PowerVu P: 1010:000000 ;TANDBERG ###ADD### A: ::000A:0104 2600:000000:1FFF ; ERT 1 A: ::0014:0100 2600:000000:1FFF ; ERT 2 A: ::0028:0102 2600:000000:1FFF ; ERT SPORTS HD P:0664:000000:::4000 # Digiturk P: 0604:000000:02c1:0134:0086 P: 0604:000000:06ab:0607:0062 P: 0604:000000:06a9:0605:005a P: 0604:000000:06aa:0606:006b P: 0604:000000:03ed:0516:0061 P: 0604:000000:06ac:0608:0058 P: 0604:000000:08fd:0cce:0043 M: 1819:00006D:1034 0100:00006D:1034 M: 1818:00006C:52EC 0100:00006C:52EC P: 1830::183A # RTL HD P: 0500:042820 P: 1803:000000 P: 1709:000000:::1199 P: 1709:000000:::06A8 P: 0648:000000 P: 0D95:000000 P: 0B00:000000:::6FEE P: 0B00:000000:::6FEF P: 0B00:000000:::6FF0 P: 0B00:000000:::6FF1 P: 0B00:000000:::6FF3 P: 0B00:000000:::6FFA P: 0B00:000000:::6FFF
-
64bit
./ncam: error while loading shared libraries: libpng16.so.16: cannot open shared object file: No such file or directory
-
You did not post output ?!
Please run ncam and post here the result >>
as you see on my ubuntu 20.04 works just fine
Code
Display More18:08:36 00000000 s >> NCam << cardserver log switched, version 11.6, revision r1 build 30-11-2020 (x86_64-linux-gnu-libcurl) 18:08:36 00000000 s (main) System name = Linux 18:08:36 00000000 s (main) Host name = fairbird 18:08:36 00000000 s (main) Release = 5.4.0-54-generic 18:08:36 00000000 s (main) Version = #60-Ubuntu SMP Fri Nov 6 10:37:59 UTC 2020 18:08:36 00000000 s (main) Machine = x86_64 18:08:36 00000000 s (main) creating pidfile /tmp/.ncam/ncam.pid with pid 143372 18:08:36 00000000 s (emu) NCam-emu version 798 18:08:36 00000000 s (main) signal handling initialized 18:08:36 00000000 s (config) ERROR: Cannot create file "/var/tuxbox/config/ncam.srvid2.tmp" (errno=2 No such file or directory) 18:08:36 00000000 s (reader) emulator [emu] creating thread for device emulator 18:08:36 00000000 s (main) waiting for local card init 18:08:36 04BCE77F r (emu) Stream key delayer initialized 18:08:36 04BCE77F r (emu) Stream relay server initialized 18:08:36 04BCE77F r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357) 18:08:36 00000000 (emu) INFO: FFDecsa parallel mode = 128 18:08:36 0BDB5D26 h (webif) webif: decompressed 277550 bytes back into 673912 bytes 18:08:36 0BDB5D26 h (webif) HTTP Server running. ip=0.0.0.0 port=8181 18:08:37 04BCE77F r (reader) emulator [emu] card detected 18:08:38 04BCE77F r (reader) emulator [emu] found card system emu 18:08:38 04BCE77F r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1 18:08:38 04BCE77F r (emu) WARNING: Wrong key format in SoftCam.Key: F 2A94055E 02 18:08:38 04BCE77F r (emu) Cannot open key file path: /var/tuxbox/config 18:08:38 04BCE77F r (emu) Cannot open key file path: /var/keys 18:08:38 04BCE77F r (emu) Total keys in memory: W:0 V:11 N:12 I:7 F:161 G:0 P:454 T:12 A:0 18:08:39 00000000 s (main) init for all local cards done 18:08:39 00000000 s (emmcache) loading emmcache disabled since no reader is using it! 18:08:39 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
./ncam
-
This log file is version 11.5
Code
Display More------------------------------------------------------------------------------- >> NCam << cardserver log switched at Mon Nov 30 17:36:32 2020 ------------------------------------------------------------------------------- 2020-11-30 17:36:32 00000000 s >> NCam << cardserver log switched, version 11.5, revision r1 build 03-11-2020 (x86_64-linux-gnu-libcurl) 2020-11-30 17:36:32 00000000 s (main) System name = Linux 2020-11-30 17:36:32 00000000 s (main) Host name = Ncam-System-Product-Name 2020-11-30 17:36:32 00000000 s (main) Release = 3.13.0-170-generic 2020-11-30 17:36:32 00000000 s (main) Version = #220-Ubuntu SMP Thu May 9 12:40:49 UTC 2019 2020-11-30 17:36:32 00000000 s (main) Machine = x86_64 2020-11-30 17:36:32 00000000 s (main) creating pidfile /tmp/.ncam/ncam.pid with pid 27529 2020-11-30 17:36:32 00000000 s (config) services reloaded: 0 services freed, 62 services loaded, rejected 0 2020-11-30 17:36:32 00000000 s (config) CCcam.cfg read lines: C:0 N:0 L:0 R:0 2020-11-30 17:36:32 00000000 s (emu) NCam-emu version 798 2020-11-30 17:36:32 00000000 s (config) userdb reloaded: 205 accounts loaded, 18 expired, 12 disabled 2020-11-30 17:36:32 00000000 s (main) signal handling initialized 2020-11-30 17:36:32 00000000 s (config) 1021 provid's loaded 2020-11-30 17:36:32 00000000 s (config) 6164 service-id's loaded in 89 ms 2020-11-30 17:36:32 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's! 2020-11-30 17:36:32 00000000 s (net) cs378x: initialized (fd=6, port=XXXX) 2020-11-30 17:36:32 00000000 s (net) newcamd: initialized (fd=7, port=XXXX) 2020-11-30 17:36:32 00000000 s (net) -> CAID: 0000 PROVID: 000000 2020-11-30 17:36:32 00000000 s (net) cccam: initialized (fd=8, port=XXXX) 2020-11-30 17:36:32 00000000 s (reader) softcam [emu] creating thread for device emulator 2020-11-30 17:36:32 4DFB3D25 r (reader) softcam [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357) 2020-11-30 17:36:32 25845744 h (webif) webif: decompressed 277713 bytes back into 673584 bytes 2020-11-30 17:36:32 25845744 h (webif) HTTP Server running. ip=0.0.0.0 port=8181 2020-11-30 17:36:32 7F4406D1 p (reader) Reader_Cards.OSN [newcamd] connecting to 192.168.1.5:15001 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F02 [cccam] creating thread for device 192.168.1.7 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F03 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F04 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F05 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F06 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F07 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F08 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F09 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F10 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F11 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F12 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F13 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F14 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F15 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F16 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F17 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F18 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F19 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F20 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (reader) Reader_Cards.F21 [newcamd] creating thread for device 192.168.1.6 2020-11-30 17:36:32 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.ncam/ncam.emmcache in 0 ms 2020-11-30 17:36:32 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.ncam/ncam.emmstat in 0 ms 2020-11-30 17:36:32 00000000 s (anticasc) anti cascading disabled 2020-11-30 17:36:33 55BD6584 c (client) plain dvbapi-client granted (dvbapiau, au=auto (42 reader)) 2020-11-30 17:36:33 55BD6584 c (dvbapi) Error in ncam.dvbapi: ret=0 | s: 0000 000000 0000 10000 2020-11-30 17:36:33 55BD6584 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/ncam.ccache 2020-11-30 17:36:33 55BD6584 c (dvbapi) Using /tmp/camd.socket listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11 2020-11-30 17:36:34 4DFB3D25 r (reader) softcam [emu] found card system emu 2020-11-30 17:36:34 4DFB3D25 r (reader) softcam [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1 2020-11-30 17:36:34 4DFB3D25 r (emu) WARNING: Wrong key format in SoftCam.Key: F 2A94055E 02 2020-11-30 17:36:34 4DFB3D25 r (emu) Reading key file: /var/tuxbox/config/SoftCam.Key 2020-11-30 17:36:34 4DFB3D25 r (emu) Total keys in memory: W:0 V:27 N:12 I:7 F:332 G:0 P:1112 T:172 A:0
-
Any can confirm it work in openplin4.0 or not,
i read all and try all,but ....
Did you install ipk ?!
Please install ipk or install needed packages
Update ...
Ncam V11.6
Code-Fix some bugs -Update/Add some Free seever sites -Now ncam can be downlaod and read softcam.key direct from net (see ncam.server) -Add New file ncam.fs for free server works same as CCcam.cfg (All Free Servers you can enable/disable from ncam.fs, And CCCam.cfg keep it for the private buy C Lines)
All files download links from first post
Hello fairbird
Thanks for this version
Version 11.6 x86-Linux-pc 64bit does not run on Ubuntu !!
Where is the output of run ncam ?!!!
for dream 800se in openatv 6.3 error
ncam: error while loading shared libraries: libnghttp2.so.14: cannot open shared object file: No such file or directory
PLZ Help
No support for old images .. Sorry I cannot ... move to new images
/var/local
-
Dear @fairbird i have two servers oscam emu with cacheex AIO and ncam 11.2 emu cacheex AIO latest. and i am facing same problem in both. they can not follow the rules i set in dvbapi for different channels priority CAIDs. for example i add in dvbapi " P: 0500:043800:1234" so as per criteria the server always go first to this card CAID but they always goes to conax caid 0b00 and 0b01 which is quit poor and channel goes freezing many times . and many other Caids i set in priority but server not go for those Caids. what can i do please help
Hi Dear @sagher
Try Load Balance : 0 or 1
-
Ncam 11.0
*******************
P.s: No more bin for openssl1.1 (all bin files will be works on all image openssl old/new)
*******************
Download link
Ncam-Images-IPK (For All devices that use ipk system)
NCam-Images-OSDreambox-DEB (For all Dreambox with DreamOS images that use dpkg system Such as (original image, Merlin4, Gp4, Dream-Elit ..etc))
*******************
Here are Only Bin file ..
(mips (Gigablue-Dream-VU+-Xtrend-Formuler
(sh4 (Golden Media-Galaxy innovations-Amikosh4-stapi5 (Cardiff) (Forever[9898, 3434, Nano Smart])
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT(aarch64-ARM (VU+4K Duo4K + osmio4k
(mips (Tiviar plus and similar
(mipszrouter (Routers Mipsel DD-WRTncam.gx-csky (uClan (U2C) Denys H.265)
*****************************************************************************
************** Bin files for Android Devices Only **************
*****************************************************************************WeTekPlay2 WeOS-v2 (5.0-Lollipop)
WeTekPlay2 WeOS-v3 (6.0-Marshmallow)
----- Android stapi -----
*******************************************
**************** config Files **************
Thank you very much fairbird for Ncam 11
It works great
-
it very clear ... You need to update your openssl to 1.1
https://askubuntu.com/question…-1-1-and-libcrypto-so-1-1
Why you are still using old version of ubuntu-14.04.1 ?!!
Now Ubuntu released 20.04 ...
workss good
-
my ubuntu-14.04.1
worked by ssl and curl
worked great
Code>> OSCam << cardserver log switched at Fri May 8 20:53:26 2020 ------------------------------------------------------------------------------- 2020/05/08 20:53:26 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11578-798 (x86_64-linux-gnu) 2020/05/08 20:53:26 00000000 s (main) System name = Linux 2020/05/08 20:53:26 00000000 s (main) Host name = cccam.Local.Card-System-Product-Name 2020/05/08 20:53:26 00000000 s (main) Release = 3.13.0-32-generic 2020/05/08 20:53:26 00000000 s (main) Version = #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 2020/05/08 20:53:26 00000000 s (main) Machine = x86_64 2020/05/08 20:53:26 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6430
-
ncam 10.9 x86-64 work in Ubuntu (only need to update ssl and curl)
-
AFN Config And PowerVu Auto Update For NCam 10.0
Download ==> AFN Config.rar
Wait for the 60 seconds to receive the key.
Download ==> AFN 9.0E PiconAFN PICON.rar
-
AFN Works great in Dream 800se openatv auto update best works.Ncam 10.0
-
should this work on Extrend 9000 with openatv 6.1?
thanks
hello ,Moshkelet che hast dadah?