DreamTWO can run PLI, but everything doesn't work as it should. DreamOS systems are a better choice for these models.
I can recommend this box for use.
DreamTWO can run PLI, but everything doesn't work as it should. DreamOS systems are a better choice for these models.
I can recommend this box for use.
icam settings installed
times log file from oscam
HD+ channels work
new version V27 , chanlog for VTI image
*.aarch binary is 11719 not 11725 :)
Can you upload the newest version ?
.Toysoft öppnar ip-adressen till dreambox två genom hemsidan och den visar mig att jag kan installera till exempel en ny bild. Under installationen försvinner helt enkelt ip-adressen till dreambox two och webbplatsen. Det är väldigt konstigt att den tappar IP-adressen.I have communication via telnet because I have an image in it and it works on dreambox.
Maybe try press ctrl+F5 when you open www
openatv for one and two does not destroy the box, flash the image works 100% identical as the dreamos
Yes, but a few functions dont works on ATV. For example HDMI-CEC
Which Oscam file/emu should I use with the original AIO Image on my Dreambox One?
*.aarch64
Display Morethe binary is from Mohamed
I can't build a deb
sometimes it is enough to rename the ipk to deb
you can also install from mohamed
take my configs
is exactly the same, hold my configs and my skin
Ok i will test for a few days.
*.css is not showing in webif conf. And i think is not loading to webif.
check please
is for GP4 Image
root@dreambox:/usr/bin# osicam -V
Version: oscam-1.20_svn-r11719-798-ICAM-v9 - build by MOHAMED_OS
Compiler: aarch64-dreambox-linux-gnu-libcurl
Box type: generic (generic)
PID: 6030
TempDir:
GBox tmp_dir: not defined using:
ConfigDir: /etc/tuxbox/config/
WebifPort: 0
Build BY: MOHAMED_OS
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
DVB API with ICAM streamrelay support: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
Cache exchange AIO support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: no
IPv6 support: no
Emulator support: yes
Built-in SoftCam.Key: yes
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
Ok i will test it.
It introduce as : Version: oscam-1.20_svn-r11719-798-ICAM-v9 - build by MOHAMED_OS
I use Dream AIO with Enigma5.0 on DreamTwo.
For DreamTwo i need *.deb file so i use only binary from your ipk file.
I can try but I can't test it
I'll build one and you'll have to test it out
i'll do my best
Hi !
Is any chances to find oscamicam kitte888 for aarch64 for Dreambox Two ?
I use the DM one with the Dream OS and GP4 for Sky-DE with your Oscam and i dont want a Open Image !
But the Box have still the total Freezing Problem with a strange Sound after a couple of days,sometimes hours when i zap very much. ( iam not the only one)
And,yes i know,its a Enigma2 file problem and ...
Try DreamAIO image with Enigma 5.0 on board. For me is working much better than other image for DMTwo on OE2.6
You need install it to FLASH memory only
Hi, i'm searching for skin DreamOS 2.6 DM Two which have picons or informations when canal was decode from CommonInterface.
I try to add wigdet to infobar which use converter ModuleControl.py but it always show NoModule on DreamOS but on OpenATV is working OK.
Can anyone help?
AT doesn't work on SSD(USB) :(
Hi i have problem with install BA on DMTwo. What can i do to install corectly ?
root@dreambox:/tmp$ dpkg -i /tmp/*.deb
dpkg: regarding .../enigma2-plugin-extensions-barryallen_12.91.deb containing enigma2-plugin-extensions-barryallen:
enigma2-plugin-systemplugins-gutemine conflicts with enigma2-plugin-extensions-barryallen
enigma2-plugin-extensions-barryallen (version 12.91) is to be installed.
dpkg: error processing archive /tmp/enigma2-plugin-extensions-barryallen_12.91.deb (--install):
conflicting packages - not installing enigma2-plugin-extensions-barryallen
Errors were encountered while processing:
/tmp/enigma2-plugin-extensions-barryallen_12.91.deb
I found solution !
SocketMMI plugin was not executable in Plugins folder.
root@dreambox:/usr/lib/enigma2/python/Plugins/Extensions/SocketMMI$ ls -l
-rw-r--r-- 1 root root 607 Dec 25 17:52 LICENSE
-rw-r--r-- 1 root root 1082 Dec 25 17:52 SocketMMI.py
-rw-r--r-- 1 root root 2539 Dec 25 17:52 SocketMMI.pyc
-rw-r--r-- 1 root root 2539 Jan 1 1970 SocketMMI.pyo
-rw-r--r-- 1 root root 2 Dec 25 17:52 __init__.py
-rw-r--r-- 1 root root 151 Dec 25 17:52 __init__.pyc
-rw-r--r-- 1 root root 151 Jan 1 1970 __init__.pyo
-rwxr-xr-x 1 root root 85312 Dec 25 17:52 _socketmmi.so
-rw-r--r-- 1 root root 1411 Dec 25 17:52 plugin.py
-rw-r--r-- 1 root root 2236 Dec 25 17:52 plugin.pyc
-rw-r--r-- 1 root root 2236 Jan 1 1970 plugin.pyo
-rw-r--r-- 1 root root 6894 Dec 25 17:52 socketmmi.py
-rw-r--r-- 1 root root 9189 Dec 25 17:52 socketmmi.pyc
-rw-r--r-- 1 root root 9189 Jan 1 1970 socketmmi.pyo
Display More
When i changed permissions for all files to executable is now working fine !
root@dreambox:/usr/lib/enigma2/python/Plugins/Extensions/SocketMMI$ ls -l
-rwxr-xr-x 1 root root 607 Dec 25 17:52 LICENSE
-rwxr-xr-x 1 root root 1082 Dec 25 17:52 SocketMMI.py
-rwxr-xr-x 1 root root 2539 Dec 25 17:52 SocketMMI.pyc
-rwxr-xr-x 1 root root 2539 Jan 1 1970 SocketMMI.pyo
-rwxr-xr-x 1 root root 2 Dec 25 17:52 __init__.py
-rwxr-xr-x 1 root root 151 Dec 25 17:52 __init__.pyc
-rwxr-xr-x 1 root root 151 Jan 1 1970 __init__.pyo
-rwxr-xr-x 1 root root 85312 Dec 25 17:52 _socketmmi.so
-rwxr-xr-x 1 root root 1411 Dec 25 17:52 plugin.py
-rwxr-xr-x 1 root root 2236 Dec 25 17:52 plugin.pyc
-rwxr-xr-x 1 root root 2236 Jan 1 1970 plugin.pyo
-rwxr-xr-x 1 root root 6894 Dec 25 17:52 socketmmi.py
-rwxr-xr-x 1 root root 9189 Dec 25 17:52 socketmmi.pyc
-rwxr-xr-x 1 root root 9189 Jan 1 1970 socketmmi.pyo
Display More
Now i have installed those packages and still does not working :(
dreamciplus - 10.32 - Dreambox ciplus
enigma2-plugin-extensions-socketmmi - 4.5.1r11-r0-newnigma2-1.0 - extensions-socketmmi
enigma2-plugin-systemplugins-commoninterfaceassignment - 4.5.1r11-r0-newnigma2-1.0 - systemplugins-commoninterfaceassignment
enigma2-plugin-extensions-pineas - 0.3 - Pineas Plugin
Hi, I need help to start and configure CAM CI+ 1884 ECP module on Drembox TWO and NewNigma2 firmware.
I try install Autopin, SocketMMI, Dreamciplus and more, but nothing work fine.
Can anyone have and use similar or the same module on DM2?
ok now is ok with weather. but i don't know how to enable caid, prov info in infobar and EPG in second infobar.
but everything works fine in the PLI skin.
Ok i still have a problem...
1) Wheather MS plugin - work correctly
2) there is no wheather info in second infobar...
3) in second infobar there is no info at all
4) in infobar there is no info about prov, caid, time ecm etc...
epg in the bottom corner
The question is... your example is from openPLi8 ??