Then your setting for tuners:
Tuner A = USALS
Tuner B = Second cable from motorized LNB
is correct.
Then your setting for tuners:
Tuner A = USALS
Tuner B = Second cable from motorized LNB
is correct.
Do You have Unicable LNB?
Here: https://www.openvix.co.uk/inde…iver-usb-flashing-guides/ You can find a guide for Your box.
It depends of Your location, ideal longitude is near about 20E.
Very important: You must have a public IP.
See my setup guide here: RE: Motorised dish set
Hi, check which program on which satellite is the default when you turn on the box.
Maybe Other Caid i asume you have 0624
Did you have more Entitlements on Card ??? and Prio List in Oscam.dvapi Ignores any Other ???
Codedid you2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 stopped descrambling for program 3A9C (M4 HD) 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0623 PROVID: 000000 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 0625 PROVID: 051910 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0653 ECM_PID: 062A PROVID: 000000 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0B02 ECM_PID: 062B PROVID: 000000 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 4 CAID: 181D ECM_PID: 062D PROVID: 000000
My card has 0D96 & 0624. I am using now 0624....but cannot clear the only the Hungarian package.......
Hungarian package is not working with ICE cards, You need to use M7 card (pure Irdeto) and patched oscam for this card.
We'll miss you, Rest in Peace. :(
I think HS5424 uses script not to restart the oscam every 5 minutes, but to check if the oscam run, and if not, it will restart it.
Go to /etc/cron.d, create a new file named e.g. oscam_checker and write a command and save.
Then restart cron:
root@ubuntu:~# /etc/init.d/cron restart
You have to use programmable Unicable lnbs. For first four use cable no. one, and for one fifth use cable no. two. Use this lnb: https://www.inverto.tv/lnb/373…mable-40mm-lnb-with-32-ub
and for combinner use: https://www.inverto.tv/accesso…-2-way-combiner-5-2400mhz
But you must programming the lnbs for positions to use and set the tuners on boxes for unique SCR for every position including fbc tuners.
First go to box with putty on port 23.
username: root
Write command: passwd
and press enter.
Now write the password what You want - it's invisible, and press enter.
Repeat the password and enter.
Now You can connect via FTP with Your new password.
Sorry there was another mistake by copying.
I've already fixed it, try it again.
Sorry there was a mistake: g ++, it's bad.
I've already fixed it, try it again.
You have pm from me.