Posts by Contact99

  • Using CWBruteList.rar to get a CW

    I've been using a rainbow table for years to successfully get a CW for a feed but now I find that some feeds do not have the C8 and without a C8 there is no CW. Now for the first time I want to use CWBruteList.rar and the list file. I followed the instructions on the other thread about downloading the application CWBruteList.rar and the latest list file. Did both of those with no problems. Then recorded a .ts stream from a specific channel just for test purposes using Transedit 4. This program I have used successfully for many years to get the stream for CSA V1 Rainbow Table and now I want to use Transedit 4 for CWBruteList.rar. I recorded 150MB of video only stream (H264). I tried every single combination of folders and different combinations but at the end of the day when using this application i got the same error message once i press the PROC PROGRAM button.


    "Error. Unable to find programs"


    It comes up with the amount of keys in the list and comes up waiting (like the screenshot in the instructions does).


    So, what am I doing wrong to get this particular error message? I tried multiple different BISS channels that I know the current working key of. (Yes i have pictures on those channels) This is just to prove that the application is working and correct. But I cannot even get this far.


    THIS IS THE THREAD I DOWNLOADED FROM AND FOLLOWED THE INSTRUCTIONS:

    How To Find A Biss Keys using "CWBruteList"


    I am using the CWBruteList.rar file from the very top and using the list file from 14-11-2019.

  • Skysat V10 Plus that does not get the Biss key anymore

    Hi all

    I have a Skysat V10 Plus satellite box that get the BISS key automatically but it has stopped getting the biss key anymore. Yes I only purchaser the SkysatV10 plus 5 weeks ago but I notice this box has been around since 2017. I have checked the internet connection and that ok and I know another person that has a Skysat S2020 and its the same.

    Do you know of any other Sat Box that does Auto BISS that it still works on Auto Biss.

    thanks

  • lcd clock

    YES

    other more experience people can answer this but have gone missing.

    All I did I FTP'd a LCD4linux that has the big clock in it and one in there you can enter the menu and make bigger or smaller or change the colour or move it right or left of center and do whatever you want to do my LCD4Linux has everything I want + more ans I can see the time 6 m away

  • Ultimo 4K Some Video and Some Audio missing

    Blackhole 3.0.5 using Oscam. Emu

    I've had this issue for a while on some BISS and Some PV Channels where on some of them I have AUDIO but no video but other channels I have VIDEO but no sound and in all cases the channels are decrypted (showing Biss or PV in Green) yet my cheapo boxes that can do both encryptions have no issues whatsoever on any of these effected channels.


    What cause this and most importantly how can you fix this issue

  • Automatic Scanning on BH 3.0.5

    Yes your first line has puzzled me and as far as I know I have always changed to a new xml file for an example from measat 91.5 east to nss9 at 177w but even then when I update the new xml file with the exact parameters of satellites I always had to add the 21 satellites settings, the lot of them in reception settings and trust me this is a pain.


    Regarding openPLI, OpenVix, OpenBlackhole ands others using all the positions from lyngsat yet blackhole uses kingofsat. This is new for me (good, another thing ive learnt) as I have been also recommended to use OpenBlackhole over blackhole but some say you lose features on OpenBlackhole.

  • Automatic Scanning on BH 3.0.5

    Quote from abu baniaz

    If you want to scan specific satellites, use manual scan. You should have an option to select the satellites you want to scan.

    As far as I know I cannot scan one single Satellite in auto, If I do a AUTO scan it scan 21 Satellites one after each other. I never seen this option on BH 3.0.5 Image that allows me to AUTO scan on a single Satellite. I can only do a MANUAL Scan on a Single Satellite.

    I starting to think that changes between image are causing this. One image has this but does not have that the other image has that but does not have this.

  • Automatic Scanning on BH 3.0.5

    How can I update my XML File without losing the setting in reception setting. Can it be done with BH 3.0.5 image. Told that using OPEN BH you dont have this issue. Change XML file and the setting in reception setting are still there on existing satellites but not on NEW Satellites as to be expected.

  • Automatic Scanning on BH 3.0.5

    Sorry for the late reply as I was off the Computer for a few days.

    I have no trouble on doing a conversion from Enigma 1 to 2 but the trouble is when I update the XML. fine I lose all my setting in reception setting. when I'm talking about reception setting I'm talking about Setting like 1/ LNB 2 PRIORITY 3/ LOF 4/ Voltage Mode 5/ Increase Voltage 6/ Committed Fast Command 7/ Diseqc Diseqc,,,,, so on So on so on,, this is what I lose and I have to add again on 21 satellite. I was told that using Open BH this not a issue. I use BH

  • Automatic Scanning on BH 3.0.5

    Another issue I will have

    If you can change the XML file monthly to get new transponder on any Satellite in a second or so, now that easy but you have to update all the setting in reception Setting and since I have about 21 Satellite c and ku band stored I have about 1 hour of work to do to input them back in manually. Surely there must be a easier way to replace all the Reception Setting for each used satellites I have. 21 Satellites is a lot to do manually.



    How can get around the above issue? its a pain if I have to manually add them in on 21 Satellites

  • Automatic Scanning on BH 3.0.5

    Another issue I will have

    If you can change the XML file monthly to get new transponder on any Satellite in a second or so, now that easy but you have to update all the setting in reception Setting and since I have about 21 Satellite c and ku band stored I have about 1 hour of work to do to input them back in manually. Surely there must be a easier way to replace all the Reception Setting for each used satellites I have. 21 Satellites is a lot to do manually.

  • Automatic Scanning on BH 3.0.5

    I have updated to the latest XML file from http://satellites-xml.org/ the creator site and this XML file works good on our Ultimo 4k. but at the same time I have used XML file from https://satellites-xml.eu/ and I have nothing but issues in my reception settings and or in the satellite list were all off my CBand sats are Missing so now I'm using XML file from http://satellites-xml.org/ the creator site .


    Now the big question is if I replace my Satellite XML file from http://satellites-xml.org/ the creator site once a month does this add the New Transponders and Remove the Dead ones that i had before so if i do a Auto scan it find the New channel on the new transponder with its added NEW Frequency and Symbol rate and remove the dead ones if you select the option (I think its called) CLEAR BEFORE YOU REC-SCAN".


    I had a look in Explorer to see whats inside the XML file and at the same time I can see differences between the New and Old XML file in different XML file from 3 months ago.


    This is New for me to do everything this way .

    Because we cannot do a Blind scan all we can do is change the XML file regular and allow the XML file to update transponders and channels with a Auto scan. Is this true that you can do it this way to keep the box with the latest transponders and channels .

    Many Thanks.

  • Automatic Scanning on BH 3.0.5

  • Automatic Scanning on BH 3.0.5

    I would like to get a simple answer to these three questions as someone must know this.



    I have a Ultimo 4k using BH 3.0.5 and I have manually added ALL my transponder for years even on my Duo2 and now for the first time I have used Automatic Scan on the Ultimo 4K.


    See for years I always Scanned Manual scanning and only for FTA ONLY and I noticed now when I scan AUTO it scans Encrypted channels too (this no Problem because sometime I need these channels).


    Now that ok as I can generate a Favorite for each Satellite and put the FTA in any of my favorites with some Encrypted Channels if needed. Also I have noticed that the Ultimo 4k Hops to 17 Satellite either C and Ku Band Satellites on my system which takes 1.1/2 hours to do.


    Now for the three question I would like to be answered


    1/ Does the Ultimo 4k box only scan what in my own XML files in the box or whats in my XML file that I can see in my Dreambox Edit or does it scan other frequencies that I don't know about being used in Auto mode (I know it has no blind function). Seems to me on any satellite I cant recoginse the frequencies that were viewed on the TV.


    2/ When you do a Auto scan can you do a Single satellite not all of them



    3/ I have notice that when Im on a Satellite that I want to Auto scan when I start the scan it start to move on another Satellite and scans in any order. If there a reason why it does this As it might scan "A" Satellite and the next one to scam is 80 degrees away and when its finishes it come back to the Satellite NEXT to the one It scanned before. Yes it goes back and forward from my motorized Dish to Fixed C and ku Band dishes, Its all over the Place.


    You would think it would have a process to start from Say as an example start from Asiasat 5 at 100.0 5 Deg and go from there to Asiasat 7 at 105.5 deg E and goes to next satellite next to it as at the moment its everywhere.


    What do you think? is there a setting in the box that I have missed or can it be fix this or is it like this all the time when scanning multiple Cband and sats.


    Hope someone can answer this for me and others that still read these forums for some info.



    Thanks all