Posts by casteddus

    I hadn't seen this last reply.

    Try this one if you don't have that problem anymore


    recoded

    Hi Lululla , I installed the latest version you posted (v2.6) I encountered some problems on OATV7.4 and zgemmah9combo decoder;

    The first problem occurs when there is more than one city in the list, it always loads the last city in the list, even if you select another city after exiting the plugin if it reloads it always opens the last city in the list.

    The second problem occurs when you select multiple cities from the list to see different weather info, when you exit the plugin the GUI restarts.


    I fixed this problem by restoring the old string that I had already used in the previous version from my last post >>>>


    But there is still a problem, when there are several cities in the list, and you change the city more than 2 times when you exit the plugin the box restarts the GUI.

    I still haven't figured out the problem, check this and see if you can figure out where the problem is and if you can solve it, thanks.

    So I removed the 2.6 version and went back to my fixed 2.5 version, but noticed that the second problem (GUI restart) still occurs.


    Regards.

    you have oeaweather plugin??



    the code doesn't need any changes in my opinion, but you are free to change what you like. if you have oaweather, the program adds or takes from the oaweather plugin config

    I tried to remove all the OA Weather function and put back the original one from The Weather vers. 2.3,

    so now the correct reading of the cfg file works.
    Surely there is something that causes problems with that function with OA Weather when it finds the plugin installed.



    Thanks.



    Original:


    replaced



    This is the "plugin.py" file with the corrections listed above if anyone has problems with the city list.
    PS: the font sizes have also been slightly reduced.


    Hi Lululla , thanks for your answers, as you wrote in the previous post I also have the OA-Wether plugin installed, but that does not have a list of cities but you can insert only one at a time.
    I put the updated "plugin.py" file but it continues to give the same problem.
    I tried to change the FHD / HD values as you suggested in the last post, but nothing from only 2 entries the main and last one written in the cfg file.
    What do you suggest to do?
    Could it be that the two plugins "Oa-Weather" and "The-Weather" conflict?
    Then as I add a city it deletes all the cities saved in the config file and leaves only the last three but only displays two.
    I don't know what could be the bug that creates this problem.

    thanks.

    Ok, thanks Lululla, two different codes for ver. 2.3 / and 2.4 / 2.5???
    Anyway, how to solve the problem? Can you explain the solution better?
    Should I replace this code with the current one of 2.5?
    Which code should I replace taken from the 2.3 that works, on 2.5?
    I copy the code part of the working 2.3 so you can select the parts to put in 2.5 to make the list of locations work correctly.
    Or I wait for a repaired file "plugin.py", thanks.
    Regards.



    Hi Lululla the new version 2.5 of the plugin in question works correctly on OATV7.3/7.4 but there is a problem,

    compared to version 2.3, with the management of the list of locations added in the "TheWeather.cfg" file,

    only the last 2 locations added are saved / or recognized, the others are deleted.
    I did several tests and added 5/6 locations both with the single name and with the wording "Name-1234567",

    but the problem persists.
    Can you check and solve this problem? Thanks.
    Regards.

    Hello everyone, I don't know why this happens to you, but with vers. 1.30 and mutant-hd51 the plugin continued to work without problems viewing both from the plugin and from the bouquet and still, without the update, it works well.
    Updated to vers. 1.31 continues to work without problems without vpn.
    Thanks.
    Greetings.

    but I can't upload this to the openatv feed :thank_you2:

    If I remember correctly in the feeds there is version 1.20 and once installed with updates you get to the latest.

    Now in the OATV feeds there is v_1.28.
    To update Plugin to the current version, you must wait for the feeds to be updated with the new version,

    or update the plugin itself, from the update function with the yellow button.

    Bye.

    hi, at the moment there is no installation via ipk available, update via plugin or via command line to console ssh .


    Bye.


    PS: I can prepare the ipk installation file for you if you want.


    Code
    wget -q "--no-check-certificate" https://raw.githubusercontent.com/Belfagor2005/vavoo/main/installer.sh -O - | /bin/sh

    Hello everyone, tried the new version of the Plugin (v.1.29) on zgemma H9-combo, the plugin continues to give a black screen

    during the playback of the stream while if you create the bouquets-tv in the channel list it works correctly.
    In addition, the Plugin has a new problem never encountered in previous versions, in the status bar of the channel the TV channel that was in view before starting the plugin is always written and it always remains that name even if you change channel in the plugin with ch+/ch-.


    Tested on OpenATV 7.3 image


    While on OpenATV7.4 there is no problem with the status bar of the channel,

    because there the name of the stream channel is displayed correctly as in previous versions of the plugin,

    but the screen remains black during the playback of the stream but the channels exported in the favorites list work.


    Thanks.

    Greetings.

    Hi, installed plugin on zgemma H9 combo on clean oatv7.4, installed everything needed, does not show black screen.
    Tried all combinations 4097,5001,5001 With serviceapp in default, put on gstplayer or exteplayer3.
    With none of these it works.
    I await configuration advice or tests to do, thanks.
    Regards.



    PS: I wanted to add that I did further testing I installed and tried lower versions of the plugin and with the vers. 1.23 the video is seen and work with serviceapp configuration: default and service player: 4097.
    I do not have versions subsequent to 1.23 to test, but the vers. 1.28 does not work.

    Hello everyone, I wanted to communicate a change to the author of the Plugin Multistalker Pro v.1.2,

    if possible in the portal display section you can also add the function to change the display of the list like that of the vertical list

    as seen in previous versions (1.5/pro 1.0/pro 1.1), thanks.


    Greetings.

    Ciao

    Ho installato Multi1.2 su Zgemma h9 se con immagina Open Spa ultima, .. risulta installato ma non appare tra i plugin Potete aiutarmi Grazie

    Ciao, se stai parlando del plugin multi-pro v 1.2 allora hai installato il file realizzato per un dispositivo o IMG diverso da quello che stai usando.

    Prova altre versioni anche precedenti, una di quelle funziona a me ha funzionato la vers. 1.2+git98+f8a2afa0+f8a2afacb3-r0_all sul mutanthd51

    mentre le successive davano quel problema.

    Le trovi qui: [Plugin] MultiStalker Pro 1.2

    Ricorda che la vers. 1.2 funziona solo su immagini PY ver. >=3.12 come OATV7.4 o superiore.

    Per le IMG inferiori come OATV7.3 devi usare multi Vers. 1.5.

    Ciao.



    Hi, if you are talking about the multi-pro plugin v 1.2 then you have installed the file made for a device or IMG different from the one you are using.

    Try other versions even previous ones, one of those works for me the vers. 1.2+git98+f8a2afa0+f8a2afacb3-r0_all worked on the mutanthd51

    while the subsequent ones gave that problem.

    You can find them here: [Plugin] MultiStalker Pro 1.2

    Remember that vers. 1.2 only works on PY images ver. >=3.12 like OATV7.4 or higher.

    For the lower IMGs like OATV7.3 you have to use multi Vers. 1.5.


    Regards.

    Hi, I wanted to inform that to test if the stream servers are working or blocked by the provider you can use the PC with Firefox or Chrome browser.

    Install on the Firefox Browser Extension "Sanduseragent" or on the Chrome Extension browser "User-Agent Switcher" and set it on the Android system.

    If you open the Link Vavo, Huhu, etc. On the browser he should show you the video stream of the channels in the list,

    if your provider does not block the links.


    Greetings.

    Hi, I think start doing head next week, as I can make the video work I let solve solution.
    I wanted to add one thing, during the tests on the Manthd51 decoder I noticed that after the restart of it the plugin does not reproduce the video immediately remains a black screen, I have to change the channel with P+/P- and wait at least 10/15 sec. On the black channel and after a few changes of channel it works at the end and you can see.
    When you see all the good channels, they always work no more videos until the device restarts.
    The channels that usually text are:
    Albania: Start from the first and then go ahead with P+
    France: leave from the Animoux channel and go ahead
    Germany: always from the first and then go ahead
    Italy: from the fifth channel then go back p-
    Always wait those 10/15 sec. on the channel before the gearbox.
    If you do not see it could also be blocking the provider you use to connect the decoder to the Internet (I use Windtre as a connection works without VPN) or IPV6 has not been disabled correctly check in the plugin menu that on the IPV6 state has been written disable (by me It is like that) from that friend of mine with Zgemma-H9.2 gave him enabled voice and could not set it in disabled the restart was always enabled.


    Greetings.


    PS: not all channels are seen but most of them


    Try this Python script performed by Shell.


    If you give error: "Website is down with status code 403" then the Vavoo site is not banned from your provider


    If, on the other hand, it gives error: "Website is down with status code 404" then something is blocking the connection to the streaming website, it can be the provider.


    If, on the other hand, it gives error: "Website is down with status code 502" means that you are under VPN but functional with streaming.


    At least this script behaves like this.

    Hi, unfortunately this stream is very particular and to be able to reproduce it the device must be configured precisely and is different for each decoder model.
    Different tests must be made by changing the service until you find correct combination for that device.
    It is better to start from a clean installation of basic installation.

    Then install only the software needed for the Plugin and test as long as it works.
    I had a friend of a clean installation of the OATV7.4 given indications on what to install and configure

    how I did it on my decoder, but even if it has done everything the same does not work the same as a black screen on the "Zgemma H9.2-Se" .
    So further checks and configuration tests must be made.

    Soon I will be able to test on a "Zgemma H9.2 Combo" and I will try to make it work on that device.
    I will keep informed about my progress.
    Greetings.