Posts by masoodbutt

Quote from abdurraman

good evening group..i want to share a concern with you.

how to install barry allen exactly with what commands in dreambox 920?

I have installed barry allen on dreambox 920 but maybe I made a mistake somewhere in the installation that when I put the egami 10.4 image on barry allen the image goes halfway and does not open, so the yellow line goes halfway and the red light flashes continuously and the image does not open does not go to the end. where is the problem please can you explain to me?

thank you and respect.

found same issue with me as I installed the latest version of BA 12.91 ..I downgraded the BA version with 12.72 the issue was solved ,,again upgraded with latest version and found NO issue while installing OE2.0 images

Quote from hecha71

Quote from zayden

I have a DM900 clone Sim2.30 if I follow the instructions in post #42 will I be ok ? And which image should I have loaded to the box it's loaded with DreamElite 6.0 at the moment. Thanks.

Bro, for a clone, I don't know if everything will work adequately there...on any image in the receiver, a dream os (Any) must be installed

in SIM2.30 BA can be installed by installing the original image from https://www.dreamboxupdate.com…le/images/dm900/index.php , the tuner won't work on original image installed on flash, however tuner will work in rest installed images via BA

Quote from zayden

The install went ok and Barry Allen is in the Plugins menu however after ftp'ing a few images over and extracting them through the menu they show up in the Barry Allen menu of available boot options but only Flash will boot. All other options yield a black screen with the name of the image on the dm900 display.

Have to reboot with the power switch on the rear of the unit to boot again from Flash. What has gone wrong here ?

to install OE2.2 based images via Berry Allan like open ATV ,open blackhole like that ,you are facing issues?

Quote from hecha71

Quote from masoodbutt

is there any scope to install Berry Allan successfully on DM 900 ?

kindly share the procedure

RE: Multiboot flash image with Barry Allen for DM920

installed and working great

is there any scope to install Berry Allan successfully on DM 900 ?

kindly share the procedure

Quote from felix dias

Go to :

this is not the proper answer ....to upgrade rescue loader simply give/type the command in DCC/telnet ,press ENTER and then reboot

update-rescue -v 

Quote from syed.sunder70

Respected Sir,

This is regarding Dream box dm 920 UHD, I need to install the latest software " dreambox-image-deb-dm920-20200515.tar.xz"

Before that I pressed the front power button for few seconds "Dreambox dm920 displayed - waiting for DHCP"

In telnet I have typed the below commands for installing rescue loader "zImage-rescue-3.14-r0-dm920-20200511.bin"

wget https://www.dreamboxupdate.com….14-r0-dm920-20200511.bin

Message on the telnet was "bad address"

Could you please suggest me on the above.

Display More

the message "waiting for DHCP" appears in only one case if the attached router is malfunctioning or not attached properly ( lan connector may be faulty or wrongly paired)

to update the rescue loader simply type the command at telnet update-rescue -v

the solution/remedy for this issue is ,you need to delete/rename the movie folder from media>ba ,reinstall old version of BA like 12.73 (mostly I use ) ...restart in enigma mode ,upgrade Berry Allan 12.82 by adapting same procedure ..OE 2.2 images will start working

Quote from eye4jaan

i have dm 900 orignal cane this image work?

yes ,can be used in original box via Barry Allen only ......box can be bricked if tried to install into flash.

then why title showing SIM2 and 84D ?(

Quote from parageria

this is ONLY nfi for original dm800se

till you mention/expose your skill ,no one is going to teach you .You can find/explore various supporting tools to meet your requirement.

Quote from ERK@L

Quote from masoodbutt

görüntüyü orijinal DM 800 HD modelime kurdum ve OLED'deki mesajı "NO CA bulundu"

Bu görüntüyü orijinal kutulara yüklememeyi öneriyorum

do not install dm800 hd pvr for image dm800 se

:rolleyes:

I installed the image , was specified for particular box i,e DM 800se

Display More

installed the image into my original DM 800HD se and found the message on OLED "NO CA found"

I recommend NOT to install this image into original boxes

Quote from foz

this image is in the wrong section this should be original images only !!

I checked by installing into my clone box and found this image a clone