Posts by _Zorro_

I like HDMU

I have been testing this setup in cccam and oscam, and its working like a charm.
:)
---------------------------------------
Make sure that you use the latest 3rd party software. Most software supports the triple reader automatically.
The old dm drivers don't recognise the vid and the pid of the device. So you can modprobe it manually and the kernel will recognise the 3 devices.

An example:

at first, check what devices you have :

cat /proc/bus/usb/devices | grep 'T:\|S:'

sample output:

Source code
1
2
3
4
5
6
7
8
9
10
11
12
13
[root@a ~]# cat /proc/bus/usb/devices | grep 'T:\|S:'
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
S: Manufacturer=Linux 2.6.32.26-175.timb1.i686 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1f.4
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
S: Manufacturer=Linux 2.6.32.26-175.timb1.i686 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1f.2
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
S: Manufacturer=Argolis BV
S: Product=Smartreader plus
S: SerialNumber=BLAAH001

Now you see that you have one Smargo with SerialNumber "BLAAH001", just put "device = Serial:BLAAH001" in oscam.server and configure other needed parameters for this. Do the same for other Smargo slots (each of them should have own specific SerialNumber) and u'r done.
If you cant use smartreader protocol, then you need use /dev/ttyUSB0, /dev/ttyUSB1, /dev/ttyUSB2 etc. accordingly or bind these Smargo devices with the specific names using udev rules, so you have no mess with device order.

Please give the output of

lsubs -d 403:6011 -v

and if that does not give any output:

lsusb

Make sure you have installed the driver:

opkg update && opkg install kernel-module-ftdi-sio
load it:
modprobe ftdi_sio

plug the reader, and check whether it is detected, and claimed by the driver:

dmesg

Normally it would now have detected and attached three virtual comports:

/dev/ttyUSB0
/dev/ttyUSB1
/dev/ttyUSB2

which you can use in your config.

Yes happens to me too, really is not anything good, but ...

is the key to you get out a magnifying glass

I have helped

The problem is the binaries Each image has its binary
The correct binary and not have problems

Hello
Amiko SHD-8900 Alien HD quality at this price is very good ....
Then go to the section so is the Alien has several manuals
very simple good luck.

good night

Hello guys, I have a problem with a Amiko Alien SHD 8900 has image

HDMU_10906_E2_spark_211_git_5443_nodebug_Diff0_gst_Flash,

but not me opens the HDS

Any suggestions? thank you

Hello Again

I have no more problems

Here is how I did

I updated with an old imag, and 100%

HDMU_10709_E2_spark_211_git_5302_nodebug_Diff0_gst_Flash == >> 100 % OK

thank you

topic closed

Quote from Steve_W

I'm interested in this too, I have the 3700... where did you download the latest HDMU image? Thanks.

Hi

Forum

Amiko Allien

Imag + Spark

HDMU end the latest IMG HDMU_10906_E2_spark_211_git_5443_nodebug_Diff0 _gst_Flash

http://linuxsat-support.com/am…-image-amiko-alien-6.html

super cool ........... Tanks:haha:

How to recover your DM800 SE & 500HD Clone From NO CA ERROR with SunRay-FlashUp and B

How to recover your DM800 SE & 500HD Clone From NO CA ERROR with SunRay-FlashUp and B

How to recover your DM800 SE & 500HD Clone From NO CA ERROR with SunRay-FlashUp and B

Hello Tomy ta where the problem?
Thank clicks
+ F 5

File Type: zip cccam-2.2.1.zip (1.97 MB, 1 views)

easier to go home OSCAM

SECTION here or OSCAM

http://linuxsat-support.com/oscam-files/

#sudo apt-get install noip2

next user ....... passs web ..... YOUR NO-IP .....beer10

#reboot

good Afternoon

Thanks Ja gave the error that caused

Click Tancks not Like :( :(

Thanks MasterG

Good morning

I can not download files?

this is my problem or the forum?

tanks
have a nice day

I have a friend who already had this experience now only uses 2.1.3

Hi

For the caid 1802 try :

oscam config

[global]
Nice = -1
LogFile = stdout
MaxLogSize = 102400
Sleep = 0
FallbackTimeout = 2
ClientTimeout = 5
ClientMaxIdle = 120
CacheDelay = 150
WaitForCards = 1
PreferLocalCards = 1

[newcamd]
key = 0102030405060708091011121314
port = Your_port@1802:004801,004901,000000 ##Ist OK

Oscam User

[account]
user = BBBB
pwd = CCCC
group = 1
au = TVCABO

Oscam Server

[reader]
label = TVCABO
protocol = internal
detect = cd
device = /dev/sci0
group = 1
mhz = 357
cardmhz = 357
emmcache = 1,3,2
caid = 1802
ident = 1802:004801,004901,000000
n3_boxkey = xxxxxxxxxxx <- Insert your boxkey
n3_rsakey = xxxxxxxxxxx <- Insert your rsakey

Done ::

Ccam config

N: 127.0.0.1 YOUR_PORTUSER PASS 01 02 03 04 05 06 07 08 09 10 11 12 13 14 :mrg:

Macke Reboot sistem and active CAM and save
Oléééééé the best