Posts by dinje

    check the url actually works, say in VLC


    Check the url has m3u_plus&output=ts as i think the plus makes a difference. At least on some boxes.


    I wouldn't bother typing it all in, just paste the full url with no brackets in playlist.txt so much easier, and less chance on making a mistake.


    Good info in Kiddac section.

    Please login to see this link.

    Just an update, and if someone else has this problem. It seems it was my internet. I have been having issues for a while, and now its fixed, the spinning wheel has all but gone. ;)

    In the top left corner the spinning wheel appears every 40 secs for about 10 secs. I have scoured google and tried most of the options.


    1. removed plugins.

    2. initialized the internal hard drive.

    3. Changed skin.

    4. disabled and deleted all timers and time shift.

    5. Stopped epg update.


    I have not done a re flash, as i deleted my backups, and according to the web that did not work anyway.


    Any other ideas please?

    Hi,
    Box: Vu+ Duo²
    Firmware version: OpenViX 5.1.002 (2017-11-13)

    I’m having trouble adding a second supplier. works fine with one supplier. Am I putting it in the right place?
    I tried Please login to see this link. and got an error, no matter what i do, it always an error.

    An error has been found!

    Click on Please login to see this picture. to jump to the error. In the document, you can point at Please login to see this picture. with your mouse to see the error message.
    Errors in the XML document:
    49: 3 The element type "supplier" must be terminated by the matching end-tag "</supplier>".


    <!--
    E2m3u2bouquet supplier config file
    Add as many suppliers as required
    this config file will be used and the relevant bouquets set up for all suppliers entered
    0 = No/False
    1 = Yes/True
    For elements with <![CDATA[]] enter value between empty brackets e.g. <![CDATA[mypassword]]>
    -->
    <config>
    <supplier>
    <name>SULS</name><!-- Supplier Name -->
    <enabled>1</enabled><!-- Enable or disable the supplier (0 or 1) -->
    <settingslevel>simple</settingslevel>
    <m3uurl><![CDATA[Please login to see this link.]]></m3uurl><!-- Extended M3U url -->
    <epgurl><![CDATA[Please login to see this link.]]></epgurl><!-- XMLTV EPG url -->
    <username><![CDATA[myusername]]></username><!-- (Optional) will replace USERNAME placeholder in urls -->
    <password><![CDATA[mypassword]]></password><!-- (Optional) will replace PASSWORD placeholder in urls -->
    <providerupdate><![CDATA[]]></providerupdate><!-- (Optional) Provider update url -->
    <iptvtypes>0</iptvtypes><!-- Change all TV streams to IPTV type (0 or 1) -->
    <streamtypetv></streamtypetv><!-- (Optional) Custom TV stream type (e.g. 1, 4097, 5001 or 5002 -->
    <streamtypevod></streamtypevod><!-- (Optional) Custom VOD stream type (e.g. 4097, 5001 or 5002 -->
    <multivod>0</multivod><!-- Split VOD into seperate categories (0 or 1) -->
    <allbouquet>0</allbouquet><!-- Create all channels bouquet (0 or 1) -->
    <picons>0</picons><!-- Automatically download Picons (0 or 1) -->
    <xcludesref>1</xcludesref><!-- Disable service ref overriding from override.xml file (0 or 1) -->
    <bouqueturl><![CDATA[]]></bouqueturl><!-- (Optional) url to download providers bouquet - to map custom service references -->
    <bouquetdownload>0</bouquetdownload><!-- Download providers bouquet (uses default url) must have username and password set above - to map custom service references -->
    <bouquettop>0</bouquettop><!-- Place IPTV bouquets at top (0 or 1) -->
    <supplier>
    <name>TVSAT</name><!-- Supplier Name -->
    <enabled>1</enabled><!-- Enable or disable the supplier (0 or 1) -->
    <settingslevel>simple</settingslevel>
    <m3uurl><![CDATA[Please login to see this link.]]></m3uurl><!-- Extended M3U url -->
    <epgurl><![CDATA[Please login to see this link.]]></epgurl><!-- XMLTV EPG url -->
    <username><![CDATA[myusername]]></username><!-- (Optional) will replace USERNAME placeholder in urls -->
    <password><![CDATA[mypassword]]></password><!-- (Optional) will replace PASSWORD placeholder in urls -->
    <providerupdate><![CDATA[]]></providerupdate><!-- (Optional) Provider update url -->
    <iptvtypes>0</iptvtypes><!-- Change all TV streams to IPTV type (0 or 1) -->
    <streamtypetv></streamtypetv><!-- (Optional) Custom TV stream type (e.g. 1, 4097, 5001 or 5002 -->
    <streamtypevod></streamtypevod><!-- (Optional) Custom VOD stream type (e.g. 4097, 5001 or 5002 -->
    <multivod>0</multivod><!-- Split VOD into seperate categories (0 or 1) -->
    <allbouquet>0</allbouquet><!-- Create all channels bouquet (0 or 1) -->
    <picons>0</picons><!-- Automatically download Picons (0 or 1) -->
    <xcludesref>1</xcludesref><!-- Disable service ref overriding from override.xml file (0 or 1) -->
    <bouqueturl><![CDATA[]]></bouqueturl><!-- (Optional) url to download providers bouquet - to map custom service references -->
    <bouquetdownload>0</bouquetdownload><!-- Download providers bouquet (uses default url) must have username and password set above - to map custom service references -->
    <bouquettop>0</bouquettop><!-- Place IPTV bouquets at top (0 or 1) -->
    </supplier>
    </config>

    Go to Please login to see this link. and have a good read, it will sort it all for you, remember the epg importer plugin and a line to put in it.

    STB = VU Duo2 Openvix


    I loaded bouquet from STB did some editing in E-Channelizer, then wrote it back to STB and now i have tune failed on all channels.


    Is it writing back in a different format?


    At the bottom of


    I have setting at bottom of E-channelizer


    Setting Version: ver E2 V4

    parental Control: None

    File format lamedb


    It was initially set at this below when i first wrote it back, when it screwed up i changed it to the setting above but its still the same.


    Setting Version: ver E2 V5

    parental Control: Blacklist

    File format lamedb

    Mine went off. Go to sports in bouquet, highlight bt sports hd 1, then yellow button (providers) your see bt sports alternatives. press menu and add it to bouquets and it should work.


    However when i tried to alter in dreamset it would not show, so i just did an auto bouquetmaker scan anyway as i hadn't updated in a while, and now its all good.

    Whenever i attached a 2tb or 750mb USB hardrive, it crashes the box and keeps going into a boot loop until i disconnect the USB drive, then it boots fine. I have tried it on two USB drives and the same thing happens. Also tried on rear and front usb ports.


    Any ideas please, as i want to use the drive for recording.


    Thanks


    Edision OS mini


    OpenViX 5.0.025 (2017-08-09)



    OpenViX Enigma2 Crashlog


    Crashdate = Fri Sep 8 04:35:41 2017


    Creator = OpenViX

    Version = 5.0

    Build = 025

    Type = release

    Machine = osmini

    URL = Please login to see this link.

    Compiled = Aug 10 2017

    Skin = ViX-Night-HD/skin.xml

    Component = Enigma2


    Kernel CMDline = console=ttyS0,115200 ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs

    Nim Sockets = NIM Socket 0:

    Type: DVB-S2

    Name: Broadcom BCM73XX

    Frontend_Device: 0

    I2C_Device: 255

    Has_Outputs: no

    NIM Socket 1:

    Type: DVB-T2

    Name: Panasonic MN88473

    Frontend_Device: 1

    I2C_Device: 2

    Has_Outputs: yes

    Mode 0: DVB-T

    Mode 1: DVB-C




    <294175.159> [Volume] setValue 15

    <294175.162> [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0

    <294175.164> [eDVBVolumecontrol] Setvolume: raw: 15 15, -1db: 54 54

    <294175.185> [VideoHardware] reading preferred modes failed, using all modes

    <294175.187> [Skin] processing screen Scart:

    <294175.200> [Skin] processing screen AutoVideoModeLabel:

    <294175.208> [Avahi] timeout elapsed

    <294175.209> [Avahi] avahi_timeout_update


    <294175.209> [eDVBFrontend] close frontend 1

    <294175.209> [eDVBFrontend] sendTone allowed only in feSatellite (1)

    <294175.209> [LogManager] Trim Poll Started

    <294175.260> [LogManager] Trash Poll Started

    <294175.261> [NetworkTime] setting E2 time: 1504841741.04

    <294175.264> [StbHardware] Set RTC to Fri 8 Sep 2017 04:35 (rtc_offset = 3600 sec.)

    <294175.289> [Navigation] playing 1:0:19:A2B:1A:F020:FFFF0000:0:0:0:

    <294175.465> Traceback (most recent call last):

    <294175.465> File "/usr/lib/enigma2/python/Navigation.py", line 89, in dispatchEvent

    <294175.465> File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 80, in event

    <294175.466> File "/usr/lib/enigma2/python/Components/Timeshift.py", line 197, in __serviceStarted

    <294175.466> File "/usr/lib/enigma2/python/Components/Timeshift.py", line 786, in ptsCleanTimeshiftFolder

    <294175.468> OSError: [Errno 135] Structure needs cleaning: '/media/hdd/timeshift/pts_livebuffer_1'

    <294175.468> [ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation instance at 0x7396a440>>,(0,)) failed)

    I want to add a video link to my bouquets to make things easier so, I copied over a video to my server pc, I opened it in VLC and saved as m3u file, (Contents of file below)

    #EXTM3U

    #EXTINF:8441,Calming Music Nature Sounds.mp4

    \\Lee-pc\d\Aquarium and nature sounds\Calming Music Nature Sounds.mp4


    Then copied that file to var/volatile/temp on my stb


    used m2b to convert it to add to my bouquet. It shows up in the list, but there is nothing showing when i press it. I tried the conversion in m2b on all options, but still would not work.


    Any ideas please?


    thanks


    I got as far as this, does it need to be linked to a player on the vu stb? to enable playback of the video file?

    Files

    • Capture.JPG

      (159.35 kB, downloaded 4 times, last: )