Hi,
Box: Vu+ Duo²
Firmware version: OpenViX 5.1.002 (2017-11-13)
I’m having trouble adding a second supplier. works fine with one supplier. Am I putting it in the right place?
I tried https://www.xmlvalidation.com and got an error, no matter what i do, it always an error.
An error has been found!
Click on to jump to the error. In the document, you can point at with your mouse to see the error message.
Errors in the XML document:
49: 3 The element type "supplier" must be terminated by the matching end-tag "</supplier>".
<!--
E2m3u2bouquet supplier config file
Add as many suppliers as required
this config file will be used and the relevant bouquets set up for all suppliers entered
0 = No/False
1 = Yes/True
For elements with <![CDATA[]] enter value between empty brackets e.g. <![CDATA[mypassword]]>
-->
<config>
<supplier>
<name>SULS</name><!-- Supplier Name -->
<enabled>1</enabled><!-- Enable or disable the supplier (0 or 1) -->
<settingslevel>simple</settingslevel>
<m3uurl><![CDATA[http://XXXXXXXXX.com:25461/get.php?username=XXXXXXXXX&password=XXXXXXXX&type=m3u_plus&output=ts]]></m3uurl><!-- Extended M3U url -->
<epgurl><![CDATA[http://XXXXXX.to/xmltv.php?username=XXXXXX&password=XXXXXXX]]></epgurl><!-- XMLTV EPG url -->
<username><![CDATA[myusername]]></username><!-- (Optional) will replace USERNAME placeholder in urls -->
<password><![CDATA[mypassword]]></password><!-- (Optional) will replace PASSWORD placeholder in urls -->
<providerupdate><![CDATA[]]></providerupdate><!-- (Optional) Provider update url -->
<iptvtypes>0</iptvtypes><!-- Change all TV streams to IPTV type (0 or 1) -->
<streamtypetv></streamtypetv><!-- (Optional) Custom TV stream type (e.g. 1, 4097, 5001 or 5002 -->
<streamtypevod></streamtypevod><!-- (Optional) Custom VOD stream type (e.g. 4097, 5001 or 5002 -->
<multivod>0</multivod><!-- Split VOD into seperate categories (0 or 1) -->
<allbouquet>0</allbouquet><!-- Create all channels bouquet (0 or 1) -->
<picons>0</picons><!-- Automatically download Picons (0 or 1) -->
<xcludesref>1</xcludesref><!-- Disable service ref overriding from override.xml file (0 or 1) -->
<bouqueturl><![CDATA[]]></bouqueturl><!-- (Optional) url to download providers bouquet - to map custom service references -->
<bouquetdownload>0</bouquetdownload><!-- Download providers bouquet (uses default url) must have username and password set above - to map custom service references -->
<bouquettop>0</bouquettop><!-- Place IPTV bouquets at top (0 or 1) -->
<supplier>
<name>TVSAT</name><!-- Supplier Name -->
<enabled>1</enabled><!-- Enable or disable the supplier (0 or 1) -->
<settingslevel>simple</settingslevel>
<m3uurl><![CDATA[http://XXXXXXXX.com:8080/get.php?username=XXXXXXX&password=XXXXXXXX&type=m3u&output=ts]]></m3uurl><!-- Extended M3U url -->
<epgurl><![CDATA[http://XXXXXXX.com:8080/xmltv.php?username=XXXXXX&password=XXXXXXXX&type]]></epgurl><!-- XMLTV EPG url -->
<username><![CDATA[myusername]]></username><!-- (Optional) will replace USERNAME placeholder in urls -->
<password><![CDATA[mypassword]]></password><!-- (Optional) will replace PASSWORD placeholder in urls -->
<providerupdate><![CDATA[]]></providerupdate><!-- (Optional) Provider update url -->
<iptvtypes>0</iptvtypes><!-- Change all TV streams to IPTV type (0 or 1) -->
<streamtypetv></streamtypetv><!-- (Optional) Custom TV stream type (e.g. 1, 4097, 5001 or 5002 -->
<streamtypevod></streamtypevod><!-- (Optional) Custom VOD stream type (e.g. 4097, 5001 or 5002 -->
<multivod>0</multivod><!-- Split VOD into seperate categories (0 or 1) -->
<allbouquet>0</allbouquet><!-- Create all channels bouquet (0 or 1) -->
<picons>0</picons><!-- Automatically download Picons (0 or 1) -->
<xcludesref>1</xcludesref><!-- Disable service ref overriding from override.xml file (0 or 1) -->
<bouqueturl><![CDATA[]]></bouqueturl><!-- (Optional) url to download providers bouquet - to map custom service references -->
<bouquetdownload>0</bouquetdownload><!-- Download providers bouquet (uses default url) must have username and password set above - to map custom service references -->
<bouquettop>0</bouquettop><!-- Place IPTV bouquets at top (0 or 1) -->
</supplier>
</config>
Posts by dinje
-
-
Go to https://www.suls.co.uk/ and have a good read, it will sort it all for you, remember the epg importer plugin and a line to put in it.
-
STB = VU Duo2 Openvix
I loaded bouquet from STB did some editing in E-Channelizer, then wrote it back to STB and now i have tune failed on all channels.
Is it writing back in a different format?At the bottom of
I have setting at bottom of E-channelizer
Setting Version: ver E2 V4
parental Control: None
File format lamedb
It was initially set at this below when i first wrote it back, when it screwed up i changed it to the setting above but its still the same.
Setting Version: ver E2 V5
parental Control: Blacklist
File format lamedb
-
Mine went off. Go to sports in bouquet, highlight bt sports hd 1, then yellow button (providers) your see bt sports alternatives. press menu and add it to bouquets and it should work.
However when i tried to alter in dreamset it would not show, so i just did an auto bouquetmaker scan anyway as i hadn't updated in a while, and now its all good.
-
Whenever i attached a 2tb or 750mb USB hardrive, it crashes the box and keeps going into a boot loop until i disconnect the USB drive, then it boots fine. I have tried it on two USB drives and the same thing happens. Also tried on rear and front usb ports.
Any ideas please, as i want to use the drive for recording.
Thanks
Edision OS mini
OpenViX 5.0.025 (2017-08-09)
OpenViX Enigma2 Crashlog
Crashdate = Fri Sep 8 04:35:41 2017
Creator = OpenViX
Version = 5.0
Build = 025
Type = release
Machine = osmini
URL = http://www.world-of-satellite.com
Compiled = Aug 10 2017
Skin = ViX-Night-HD/skin.xml
Component = Enigma2
Kernel CMDline = console=ttyS0,115200 ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs
Nim Sockets = NIM Socket 0:
Type: DVB-S2
Name: Broadcom BCM73XX
Frontend_Device: 0
I2C_Device: 255
Has_Outputs: no
NIM Socket 1:
Type: DVB-T2
Name: Panasonic MN88473
Frontend_Device: 1
I2C_Device: 2
Has_Outputs: yes
Mode 0: DVB-T
Mode 1: DVB-C
<294175.159> [Volume] setValue 15
<294175.162> [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
<294175.164> [eDVBVolumecontrol] Setvolume: raw: 15 15, -1db: 54 54
<294175.185> [VideoHardware] reading preferred modes failed, using all modes
<294175.187> [Skin] processing screen Scart:
<294175.200> [Skin] processing screen AutoVideoModeLabel:
<294175.208> [Avahi] timeout elapsed
<294175.209> [Avahi] avahi_timeout_update
<294175.209> [eDVBFrontend] close frontend 1
<294175.209> [eDVBFrontend] sendTone allowed only in feSatellite (1)
<294175.209> [LogManager] Trim Poll Started
<294175.260> [LogManager] Trash Poll Started
<294175.261> [NetworkTime] setting E2 time: 1504841741.04
<294175.264> [StbHardware] Set RTC to Fri 8 Sep 2017 04:35 (rtc_offset = 3600 sec.)
<294175.289> [Navigation] playing 1:0:19:A2B:1A:F020:FFFF0000:0:0:0:
<294175.465> Traceback (most recent call last):
<294175.465> File "/usr/lib/enigma2/python/Navigation.py", line 89, in dispatchEvent
<294175.465> File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 80, in event
<294175.466> File "/usr/lib/enigma2/python/Components/Timeshift.py", line 197, in __serviceStarted
<294175.466> File "/usr/lib/enigma2/python/Components/Timeshift.py", line 786, in ptsCleanTimeshiftFolder
<294175.468> OSError: [Errno 135] Structure needs cleaning: '/media/hdd/timeshift/pts_livebuffer_1'
<294175.468> [ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation instance at 0x7396a440>>,(0,)) failed)
-
I want to add a video link to my bouquets to make things easier so, I copied over a video to my server pc, I opened it in VLC and saved as m3u file, (Contents of file below)
#EXTM3U
#EXTINF:8441,Calming Music Nature Sounds.mp4
\\Lee-pc\d\Aquarium and nature sounds\Calming Music Nature Sounds.mp4
Then copied that file to var/volatile/temp on my stb
used m2b to convert it to add to my bouquet. It shows up in the list, but there is nothing showing when i press it. I tried the conversion in m2b on all options, but still would not work.
Any ideas please?
thanks
I got as far as this, does it need to be linked to a player on the vu stb? to enable playback of the video file?
-
Tried gsstreamer, but doesn't give a listing, so tried the other options, gives listing but blank channels. They work fine in VLC?
-
Good points, thanks
-
Thanks. I don't need vmtv, (i already have all the tv packages i want) i have their broadband, but they sent me this tv deal and a phone deal, for less than what i was already paying for just cable. Checked my account and its full house tv. I'll cancel when the 12mths are up.
They gave me free weekend calls etc, but not a phone number. which i don't need anyway, as we all use mobiles, and don't want a land-line.
Mum lives up the road, so i'll set it up for her.
-
VM sent me a Tivo box, and 12mths free VMtv, can i put this card into the Vu+ Duo2? as i don't want the tivo stuck under the tv as well as the VU
If you have a look you might find there is actually no card present in the tivo box anyway making cs impossible.
Oh right, its up in the loft, never even opened the box. So how can i get it to work on the Duo2? if not possible, if i give it to my mum, will it work at her house, she has vm broadband.
-
VM sent me a Tivo box, and 12mths free VMtv, can i put this card into the Vu+ Duo2? as i don't want the tivo stuck under the tv as well as the VU
-
That means he will have to do this after every time AB 28.2 runs.
yes, but i only run it every few months, or when there is a channel change. I save my bouquet, then copy over only the channel changes, and then copy the bouquet back. basically i have two copies of dreamset open, one with the saved bouquet and the new bouquet, and copy over the new channel to my saved one, and copy it back to the box, can be a bit long winded i know.
-
Just move them using Dreamset, you can put what channels wherever you want them
-
its all through lan
-
No, the slyk by kiddac. i used this before the update as well, and it worked then.
-
everything i stream over the network to the box, suffers from horrendous buffering. I noticed in the "about on the vu duo2 box"
Network Interface: eth0 (Broadcom Gigabit Ethernet)
Link Speed: 100 MBit/sShouldn't the link speed match and be 1gig as well?
I have vm cable with 200mb/s are these setting ok, seems a bit low, but i thought the pc should do the encoding anyway.
-
what r you using crossepg or epgimport etc etc?
using crossepg, however vix instaled both, whats the difference?
- - - Updated - - -
What is the number of the VIx image you are using bud??? build 028 is the latest.
Just updated, hence all the pain of setting it all up again.
ystem OE: OE-Alliance 3.4
Firmware version: OpenViX 4.2.028 (2017-01-25)
Kernel / Drivers: 3.13.5 / 20161228 -
When i update my epg it doesn't show the progress bar on the tv, it used to, but i updated and don't know how to get it back
thanks
-
Ok, thanks for that, ill probably be back, its bound to go tits up..lol
-
Ok, decided to bite the bullet and update. I remember reading that it was better to update from usb and not online, depending what version you are on. is it safe to update online with my version (below) I vaguely remember seeing somewhere some version cant be updated online?
I want to keep my setting, ie my lines in cccam and mgcam will it save this in the backup?
Will it save it on the internal HD, and once updated, just go to backup and restore settings?System OE: OE-Alliance 2.3
Distro: openvix
Firmware version: Apollo.166
Driver date: 20150403
Kernel version: 3.13.5
Gui version: 2015-04-08Thanks