Yes. However you can try boot from backup nand.
there is selection nand 1 and nand2.
Select diffrent nand bank than is user. Reboot box and try reflash with lower SW if don’t work the physical nand will have to be replaced/ reprogrammed with external nand programmer
WARNING:
AS OF SOFTWARE 2.20.10R2 (REVISION 2 ) YOU CANNOT DOWNGRADE MAG ANYMORE.
You will alwayes get message unsupported architecture. You can still try boot box from other nand ( if you are lucky) there maybe still older version of firmware and it will allow you to downgrade software.
Stay away from 2.20.10r2 ( if you do upgrade to this version or higher , you will be screwed). No fix possbile. Only replacement nand will fix problem.
login and enter passwd , there is not pass set...... for ssh connections.
passwd and it will ask for pass
he overwrite uboot ... just flash new uboot and thats it.
I apologize for my English.
regarding the hd channels italy there's nothing true.
in fact it is really Dramatico.
Italian *** is burning all the cards.
is for now there are only sd channels.
whata bul.. HD is working, thompson box has been exploited, and they can pull put anything they want from that box in italy.
The reason is NOT PUBLIC, its THAT *** GERMANY IS SWAPPING THE BOXES AND *** UK DOING THE SAME, let them finish swap, and a lot folks will come up that can unpair your card for 1.000 EURO.
The biggest mistake is that all thre country's will have same pairing type, thats why some people are waiting, someone will make HUGE profits on pay servers. To get this working, everything must go black !!.
10 cards unpair = 10.000 euro, how many cards pay servers gots ? at least 10 and more.
there is nice 1.000.000 + to be collected from pay servers.
stop panic, find something usefull to do instead of writing complaints.
IF anyone of these people who write here, has italian real friend, will know that italy HD is working!!.
Its to early to come out more official with unpair service, as *** is tracking people down, who mension that.
guys, minium knowleadge, please initialize HDD first... from main menu, just press initialize (it format hdd and add partition name)
without format just type that in putty, (if /dev/sda1)
tune2fs -L "records" /dev/sda1
HDD is mounted by name of partitions, this way will never get lost like can happen on nebula
and again, telnet has been disabled, use putty and ssh connection !!
I have noticed a few people hinting that there are viable alternatives to *** uk. Can anyone recommend a good European satellite and would I need a motorised dish?
13.0E hotbird, most popular.
" SlyUK Anti-CS measures switching off HD Channels"
what a topic, haha... they change they way of broadcasting stream, and none of official cams cant handle that as it asking for non existing channels.
Someone will have to dump, not much of software from the box to make new algo and implent that in all cams.
This was, sly dont have to reach your card with new update, and it looks like this time, everything has been hidden in card, not in the box for post processing.
its harder to extract card vs to receiver.
but these days, everything is possible :)
there will be virgin media with its nagra to watch :)
worth to mension:
thera are 2 types of BZZB, diffrent cooling system, the one from picture and exactly the same as bsla.
There is only 1 version of BSLA
There are 3 verion of remote controller, that box can come.
Also there is only one version on BSKA series and BXZB ( which is same, but bxzb requires cpu change).
QuoteSo from what I can tell so far. People have managed to extract the CWPK from a *** IT box. Use a modified version (no public) of Oscam. The card in Oscam can only decrypt 1 HD channel at a time. Interesting.
1 channel been running in cacheex 3, someone already did manage to do something about new pairing algo ;), dont worry, 1st. *** will block all ***'s internationally, after that payservers wil pay to get that working again.
But again will happen the same... the payservers will have to spread that info around, beacuse they will be easy to track down when 5-15 sellers will be ofering *** ;).
Maybe they share cacheex 3 for others ??
haha..
enjoy
prices of ***box f5s will even drop lower haha :D.
from today I stopped support nbox image here, you can find me somewhere else. Hope you enjoy it.
left pic, I never seen that logo, doesnt looks like oryginal.
however, try 1.5 firmware. Should work fine.
if you have freebox uboot, press and hold power button on front panel of box
plug the power on wait till you see prog on display.
If b4t, remove power, power up box but keep pressing top and bottom arrow during boot untill you notice that everytime you pressing arrow, something is changing on display, find in there UPDT or UPDATE, depends of bootloaders used, duo multiboot v1, v2 etc.
However put in you min to use correct env for hyprion images, its diffrent from nebula env. Use correct env.
all that faq is very old.
Now procedure is slightly diffrent to what it was long time a ago.
flashing with willemg is completly diffrent thing to what u have to do when flash virgin nbox
just use one of backup images, u will find everything installed on.
No more problems with judder, this problem was related to sh4 platform receivers, not just nbox.
its the internal player file replaced with fixed one by j00zek for sh4 platform. It is the oryginal one.
However j00zek added his source code for that fix in svn, best is the oryginal one.
The problem is in the way the satellite on *** send the signal. Some receivers just cant handle it proply as it so many errors send.
TELNET HAS BEEN DISABLED BEACUSE:
many of you are using on router DMZ, setting port forwards but most of you dosent set any password... if you do that, putting in google enigma2 interface will come up with many not protected receivers, you can accces someone box...
Even poor password with SSH is hard to crack vs compare to telnet...
to enable telnet, just edit system.sh with notepad+
Find line telnet: and change from disabled to enable and copy back on the box, reboot the box.
ps: you can use any ftp client like for example total commander and will work fine with SSH connection to yours nbox.
install total commander, start it, press ctrl+n and it will ask you for IP adress.
just enter ip, untick annonymous, enter as login root and leave password blank.
Configs are in etc/oscam
lets get thing clear when come to PKT image for nbox.
Why are they realase software for nbox ?? Beacuse the main thread is for diffrent box, all these extras, requires a lot of memory etc.
PKT HAVING A CHAINS (enviroment for nbox) SH4, THEY SIMPLY BUILD THE IMAGE WHICH BY DEFAULT HAS BEEN DESIGNED FOR OTHER BOX. (just take up to 15min to build cross coneverted image from other box)
Other teams "making" firmware in the same way very often.
If the care, they should realase "LIGHT" version for nbox, they dont even test that software on nbox. Thats why is so many bugs when u running it on nbox.
PKT realased new firmware some time a go with PIG support in skin, that was killer of nbox, a lot "uboots" vanished.
It was a very popular problem, who test that before has been realased for nbox from PKT?? no one ?
But from time to time, they realase something nice, true is that they got best recording "image-moduls" for nbox.
Hi
A lot info is missing :D
For BSKA Soft max 4.7ca 17 (4.7A 17), for BSLA 4.82 17 (4.99 17) - updated 09.2009.
Where u want to buy a box with software from 2009 ?? ;)
Very often on newer batch the loader is broken and u will not be able to acces service menu :).
You will have to connect 2 mainboard togheter, on one of them u will need to disable nand flash (that with software) and leave on only, flash with uboot.
The main conception is to connect already converted mainboard with preflashes uboot and disabled nand, to board with oryginal software, and nand enabled.
This way you can access nand over uboot from 1st mainboard.
ps: GS- mean green screen :)
hyperion require swap when used on nbox.
