Posts by lerche

Try using the firmware (Image) for MagicBox, I solved it when it got stuck on the Boot with Openesi.

it works a minute ,to the first ECM the channel freezes .

I have to go back to the French channels ,to restart the Italian channel.

I don't know what the problem is ..? I also put the latest Oscam 11693.

I can't see these channels : RSI la 1 , RSI la 2, ( SGR SWISS new frequencies , 10971 H sr 29700)

I use an image E2 (OpenPli), emu Oscam or Ncam in CS.

Only with Italian language channels ....with the French and German channels no problem .

Thanks

put a firmware E2 ,you will have less trouble managing it .

it's available , OpenPli.

Beautiful Image ,I can't find the EMU...?

Thanks

Really a Good image ,is there the possibility of making a personal backup ..?

Thanks

I have this Axas e3hd decoder, with red and green light both on.
I tried to change the power supply, nothing.
I know that at the time I had made an upgrade to the Boot, as recommended in the Forums.
I opened it but I don't see Jtag attacks, there is a serial.
Thanks
750DMIPS cpu (500 Mhz)
Linux Enigma2 (kernel 3.x.x)
1x DVB-S2 Tuner (SAT)
MPEG2 / H.264 Hardware Decoding
Lan 10 / 100MB
Plug-in System
PVR-Ready
Media Player
1x Smartcard Reader
256MB Nand Flash / 512MB DDR Memory
2x USB 2.0 (1x Front- 2x Rückseite)
1x HDMI

Octagon SF8008 and Octagon SF8008 MINI 4K ,they use the same Image...?

Thanks

CCCAM does not work in this receiver.

Oscam-gx only. See the post of Sami Noor,

Latest oscam versions for octagon 88, 88+, etc ..

I can give you the configuration for Oscam .

( for Card : Standard and GOLD)

it seems that C******, I don't know which version 2.3.2 or 2.8.2

should read the card, by default.

Bye

5139f5971.png

• Main Processor: STi7111 @ 450MHz
• Nor flash: 1x 8MB
• Nand flash: 1x 512MB
• RAM: 2x 128MB DDR
• Bootloader mit Dual-Boot-Option für Spark (Fulan-Firmware) sowie Enigma2; siehe auch Spark:U-Boot
• Frontdisplay: beim Standardmodell: 4-stellig alphanumerisch, bei Plus-Modellen: VFD hochauflösend
• Tuner Type: 1x DVB-S2 SHARP BS2S7VZ7306A
• DiSEqC: 1.0, 1.1 1.2, USALS
• Demodulation: QPSK, 8PSK
• Transport Stream: MPEG-2, H.264
• Input Rate: Max.120Mbit/s
• Aspect Ratio: 4:3, 16:9, Letter Box
• Video Decoding: MPEG-2, MP@ML, MPEG-4 part 10/H264
• Video Resolution: 720*480P/I, 720*576P/I, 1280*720p,1920*1080i, 1920*1080p
• Audio Decoding: MEPG-1 layer I/II, Mpeg2 layer II, Dolby digital
• HDMI: VER1.2, Type A
• Sampling Rate: 32, 44.1 and 48KHz
• TV-SCART: CVBS / RGB output
• Audio L/R output: RCA A/V
• Video CVBS output: Audio L/R output
• Digital Audio Output: Coaxial
• RS232: Transfer rate 115.2Kbps, 9 pinD-sub Type
• USB: 1x USB 2.0
• Ethernet: 1x 10M/100M
• Gehäusebreite: 22 cm
•  
• This is the list of Receivers, that with Image E2, (OpenPli Taapat, OpenEsi, OpenAtv) Multistream also works.

Amiko alien 8900 and Clone = Golden Media spark reloaded +Godlen Media 990 CR HD PVR Spark, Edision Pingulux and Plus,, Galaxy Innovation, Dynavision Spark, Sogno Spark Revolution, Yumatu Spark,Superbox s750, StarTrack STR 2020, Visionnet Hammer 5400, Visionnet Fireball 101, Fulan Spark i+, Truman Premier 1+ , Samsat Linux 1, Galaxy Innovations GI S8120, SAB Unifx F+ Solo .

The OpenPli image of Taapat,supports Multistream channels.

Now I have loaded the settings Vhannibal for Rotor.With other Multistream receivers I see All channels free ( Zgemma H7, Zgemma H9 combo )

it's my only problem...? Am I using an old Image E2 for Amiko 8900 ...? it is a problem of the receiver too old..?

Thanks

The free Italian channels, you can see them all at 5 ° west ...?

Thanks

use the program: HP USB DiskStorage Format Tool. for the usb pen.

If you use Windows 8, or 10 ,you can have problems formatting in Fat32.

Bye

I installed the OpenAtv 6.3, in Amiko 8900, I don't find an EMU that works ( Oscam or Ncam).

I tried to install, several EMUs in ipk format,but I'm not displayed in the OpenAtv menu...?

(I use GOOGLE traslate)

Thanks

exists on the market , the Tuner sx2 Multistrem, for this receiver : Gigablue QUAD HD Plus +....?

Thanks

the receiver Amiko Mini como, has nothing to do in this section Forum. ( Section Amiko nò Model linux )

Here we talk about receivers with E2 or Spark software.

In your receiver the IPTV,with WebTV List.txt

Nò, c è Oscam ed altre emu : wicard, Ncam,Mgcamd, Gcam.....quelle che girano per processore ARM.

I need, Ncam for Image OpenPli.

Thanks