It works with Sky Italia and cline servers (not with local card)?
If so where is the final package?
It works with Sky Italia and cline servers (not with local card)?
If so where is the final package?
What about for the rear 2.5" Hard DIsk slot?
This is my main priority for the new Dreambox!
Solved: deleted the swap partition and mounted the Hard Disk corretcly! :)
Perhaps i found the problem: if i enter in EPARTED it founds 2 partions:
Partition 1: 0-5000GB (5TB) - EXT4
Partition 2: 500-5001 partition type LINUX
Is it safe to remove linux partition?
The strange thing is:
If i install the MEDIA PLAYER PLUGIN I SEE THE HARD DRIVE (but not labeled HARD DISK but LABELED with the DISK MODEL) and inside there are all the movies and i can read it!
BUT I CAN'T MOUNT THE HARD DISK AS A NETWORK DRIVE! And under the Device section of the dream Elite it continues to tell me the partition is not supported!
Hello
I'm using a DM920UHD with the Dream Elite Image installed.
It worked flawlessy and it's mounted inside a Seagate 5TB Hard Drive.
I had to reinstall the Dream Elite Image cause a problem with the Oscam-Emu. When i booted from scratch the updated Dream Elite Image now i can't mount the Hard Disk because in the partition manager there is a green dot but next to it appears "Partition Type is not supported"!
Why?
Please help me to fix this problem! There are hundreds of movies inside the drive!
Thank you so much!
For using OSCAM-EMU with TVSAT you need to put the correct configuration files in the proper folder (in the dreambox its is /etc/tuxbox/config .
There are many oscam config files. One of these files has inside the RSA key for using the TVSAT card with OSCAM-EMU.
Attached to this post there are my config files.
Unluckly with this config it does't write viewing rights into the smartcard so once a month you have to switch to cccam/scam for updatting viewing rights.
You need an OSCAM-EMU type of OSCAM (like the one in this thread for Dreambox) and you also need a Softcam.key keys file in the config folder.
You don't need anything else: with these files it will open RSI LA1 and LA2 like a charm.
OSCAM-EMU can open VIACCESS with the proper config without a smartcard.
For NAGRAVISION (italian's TVSAT) you need an original (active) smartcard
Hello garmill
RSI works well indeed (it was totally emulated without smartcard).
TVSAT also works well bit it does not update viewing rights so once a month i have to swirtch to SCAM for updating viewing rights.
Here are my "updated" configs:
Oscam conf:
[global]
logfile = /tmp/oscam.log
nice = -1
preferlocalcards = 2
[cache]
[dvbapi]
enabled = 1
au = 1
user = linux
[webif]
httpport = 8888
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1
Oscam DVBAPI
P: 183D:::
P: 1805:::
Oscam server
[reader]
label = mediaset
protocol = internal
device = /dev/sci1
caid = 1805
rsakey = removed here but it was woring
detect = cd
group = 1
nagra_read = 2
emmcache = 1,1,2
ident = 1805:000000,008D11
blockemm-g = 1
blockemm-unknown = 1
[reader]
label = tvsat
protocol = internal
device = /dev/sci0
caid = 183D
rsakey = removed here but it was working
detect = cd
group = 2
nagra_read = 2
emmcache = 1,3,2,0
ident = 183d:000000,005411
blockemm-g = 1
blockemm-unknown = 1
Oscam user
[account]
user = tizio1
pwd = xxxxxx
group = 1,2,3
au = tvsat,mediaset
[account]
user= linux
au = 1,2
group = 1,2,3
Here is the snapshot of the OSCAM Webif reader
As you can see it does not write EMM at all.
It think it is a bug of the OSCAM-EMU 11385.
Can you upload OSCAM 11391 for DREAM ELITE 6.0?
Thank you very much!
I have a problem with OSCAM-EMU version you gave me and viewing rights of the TVSAT CARD.
The Oscam EMU 11385 doesn't write EMMs so after a month i have dark vision.
I've tried absolutely everything in OSCAM configuration for EMM writing. It doesn't work. I have to switch to SCAM for receiving viewing rights.
I'm asking you if does exist a newer version of OSCAM -EMU 11385 build and if it is can you upload it for DREAM ELITE image?
Thank you very much. :)
Here are the configs.
I'm pleased if you can help other users with my configs.
Thank you! :)
Solved (a little of creativity is great)! :D
Configured
oscam.user
oscam.server
oscam.dvbapi
....
for reading Tivúsat card.
Now i have both Tivúsat (Nagravision) and RSI (viacess) with the same OSCAM-EMU.
Thank you very much for your support and kindness! :)
You truly a master! :D
THANK YOU!!!
IT WORKS! Finally i have light on RSI La1 and RSI La2
But now i have another big problem.
If enable Oscam-Emu and Scam 3.60 i have light on RSI but no more light on Italian Tivúsat that i use with a regular smartcard.
If i enable cccam i have light on Tivúsat but no more light on RSI (priority must me on CCCAM than OSCAM-EMU.
How can i use OSCAM-EMU and SCAM/CCCAM at the same time?
Very big thank to you Master G! :)
Here we go!
Here's the FPU version i downloaded from Blupanel
I have no words for thanking you! :)
The file you linked me doesn't install correctly with automatic .deb installation through image Dream Elite 6.0
I decompressed the .deb file and i put manually the right files in
/etc/tuxbox/confing
/usr/bin
/lib/systemd/sytem
Sadly it doesn't appear in blupanel yet and i don't have light on RSI.
Softcam.key correctly placed
Permission 755 gived to oscam in /usr/bin/oscam
But is it normal i don't see OSCAM-EMU under blu panel and i see only a Softcam menu in the Decoder menu? Should i enable OSCAM-EMU in other ways?
Regarding the softcam.key i gave 644 permissions.
Still no light on RSI Swiss :(
I created the "config" directory under etc/tuxbox (there were only 2 .xml inside) and i put Softcam.key i downloaded from this section.
BLACK SCREEN.
Tried to rename Softcam.key to Softcam.keys.
BLACK SCREEN again.
I think the key file is wrong for RSI.
Should i disable also SCAM 3.60 when i use OSCAM EMU?
I'm using SCAM 3.60 for opening italian Tivúsat and it works.
Thank you for your support.
Hello Master G.
After installing your package i notice a new voice appearead in the Decoder main menu: "Softcam' "
My purpose is to configure the OSCAM-EMU for the Swiss RSI La1 HD and RSI La2 HD vision without a smartcard.
Can you help me and show me how to configure the Oscam-Emu for the light with these channels?
Thank you very much.
Thank you very much.
I tried the file you linked but it doesn't appear in Dream Elite 6.0 Blue Panel. It seems to install correctly anyway but simply it does't appear inside the blu panel.
Do you have other files i can try?
Oh my Dream Elite version is 22062017 on DM7080HD
Thank you.
Hello.
Where can i download OSCAM-EMU for DREAM ELITE IMAGE 6.0 (OE 2.5) for DM7080HD (MIPS32EL)?
I can't find it anywhere.
Thank you for your support.