Posts by 3xtr3m3d

Hi

Any one know what TBS IP Tool does? i couldn't find any useful information by searching google.

Regards

Quote from master G

In oscam.conf [dvbapi] try changing extended_cw_api = to 0 or 1 or 2

extended_cw_api = 0

(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument

only above line repeating

extended_cw_api = 1 below lines repeating

• 2018/03/28 15:40:06 017712C9 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
• 2018/03/28 15:40:06 017712C9 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
• 2018/03/28 15:40:06 017712C9 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
• 2018/03/28 15:40:06 017712C9 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
• 2018/03/28 15:40:06 017712C9 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
• 2018/03/28 15:40:06 017712C9 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument

extended_cw_api = 2 below line repeating

(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument

Hi

I have a zgemma h52s running oscam Build: r11401. when powervu encrypted channel playing below error appears

(dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument

any idea why this error appear?

channel is playing fine

Regards

disablecrccws                 = 1

solved.. needed above config for the reader

Quote from buffdadi

TRY THIS

[reader]

label = server1

protocol = newcamd

device = hostname,port

key = 0102030405060708091011121314

user = XXXXXXXXX

password = XXXXXX

disableserverfilter = 1

disablecrccws_only_for = 0500:032830,042820,030B00;1811:003311,003315;0100:003311;1819:00006D

group = 1

emmcache = 1,1,2,1

audisabled = 1

Display More

still no luck :(

Quote from master G

Do you have [dvbapi] enabled in oscam.conf ?

Try with the attached configs. Add your reader to oscam.server.

Any other errors in the oscam log ?

Thanks master G for quick reply.

i have tried those settings as-well, still no luck

there is no error messages i can see on live log though, below is the newcamd stratup and then found message repeating

Quote

• 2018/03/24 19:37:03 2C6F94A8 p (newcamd) CAID: 0000 - UA: 0000000000000000 - Provider # 1
• 2018/03/24 19:37:03 2C6F94A8 p (newcamd) Provider ID: 000000 - SA: 00000000

2018/03/24 19:37:05 5034540F c (ecm) dvbapiau (0639@000000/026A/000A/3C:CF9491C7153AC09E88A8C240E0F07E37): found (697 ms) by Line1 - CARTOON NETWORK

Hi

My box is Zgemma h5.2s running OpenPLi 6.0-release

I have added a Mgcamd line to oscam-emu Build: r11400 like this

[reader]
label                         = Line1
protocol                      = newcamd
device                        = hostname,port
key                           = 0102030405060708091011121314
user                          = username
password                      = password
disableserverfilter           = 1
group                         = 1

I can see line connected to server successfully and in live log i see Found message with times in milliseconds.

problem is my screen is black and no picture. any idea what I'm doing wrong here?

Regards

Hi

I used a dreambox dm800se and it has blindscan feature which takes ages to fully scan a satellite.

for Zgemma receiver plugin exiting saying "manufacturer doesn't support blind scan"

is there any way to get blind scan support for Zgemma h5.2s?

Regards

Hi

Which file is for Zgemma receivers?

Regards

for Zgemma H5.2S, oscam 11392 without stream relay everything works fine.

Had to disable stream relay and change API for extended CWs under DVB-api settings to 2-OE2.0

i though for my box stream relay must be enabled. but i was wrong.

i have downloaded oscam 11392 from below page and everything works perfect without stream relay.

OSCam-EMU 11392 IPK For OE2.0 Mips Based Receivers Various Images

I replaced OScam with version OSCam r11284 and powervu plays and stream perfectly fine.

but this version doesn't support autoroll feature :(

Looks like its a problem with version?

Quote from joeuser

Sorry, not really - it varies from box to box and service to service.

Not sure if your box supports it, but do you have "Include ECM in http streams" enabled?

yes. its included.

Quote from joeuser

You can try adjusting the "ECM fix delay:" in the stream relay config.

any recommended value? i have tried so many values but doesn't seems to be improving.

Hi

I have a Zgemma H5.2S receiver which running Oscam 11392 with emu ver758.

I have configured Stream Relay to play powervu channels but channels are not playing smoothly. how to fix this issue?

Regards

Quote from joeuser

Biss does not use stream relay. I assume you can stream other/FTA channels ok?? You do not get JUST video, or no video or sound?

other channels ok. checked with another feed with biss key and it works fine. seems like just that one not streaming

Hi

I have a Zgemma h5.2s box running OpenPLi 6.0-release. I have installed Oscam 11392 with emu ver758.

I tried Biss key with this Oscam version and it works fine on TV. i tried to stream it to PC via Openwebif and i don't get video.

by checking network activity i can see that TS stream is receiving without any problem but it doesn't seems to be decode.

like powervu, also Biss needs to be stream relayed? what am i doing wrong here?

Regards

thanks master G. after playing with oscam and cccam for hours, i found the way of doing it. now time to contact and ask permision to reshare if possible from provider

Hi

I have a Dreambox Dm800se and a Freesat v8 super. my dreambox runs OScam build r11284 with Cccam account.

my questions are:

1. is it possible to share cccam account through oscam to my freesat v8 box which is connected on same local network? if so how do i configure oscam?

2. is it illegal to re-share cccam account on local network?

3. if this not possible, how can i achieve this? do i need a Nline?

Regards

Hi, when i try to format internal hard disk this message appears.

"Error: A Required tool (mkfs.ext4) was not found."

any solution for this?

Regards