☺ gorski on a light note English came on a boat here, a newb might misunderstand your last statement and start to install every package in the repository, and not every package that he requires, to be sourced from pure2 repository or specifically FNC plugins
Posts by Kihmathi
-
-
well, pure2 team could perhaps have a situation where it checks for user scripts at a custom location eg hdd, then have them executed at first boot if for instance the scripts are named in a particular way to avoid them being executed at every boot. While other scripts therein can continue to be operated as currently setup.
This I say would be an awesome tweak to existing setup
-
Please share your config files here to other friends ... Or do you use the config what comes with ipk file ?!!
Concerning Zgemma H9.2h it's not a matter of configuration files. I've tried Ncam 10.9 even with old config files (the ones that work fine with Ncam 10.8) and I'm still facing the same problem.
What about Kihmathi ... He have same your device and he said every things work with new ncam ... ?!!
Try this bin file for test
And I will release new version with some fixes .... soon ...
Hi @fairbird!
@Kihmathi owns a Zgemma H7s with mipsel processor, instead my Zgemma H9.2h has a arm processor. My second box is a dm800hd se clone (mipsel). In dm800hd se clone Ncam 10.9 works fine and I can use CCcam.cfg file perfectly with the new configuration. I faced problem with arm processor.
Zgemma H7s is not mips based it uses same packages as Zgemma h92h arm processor, i also own your box but i sent it a a friend Giggzhawker under lockdown after his zgemma h9combo died on him.
-
Please share your config files here to other friends ... Or do you use the config what comes with ipk file ?!!
sorry guys was offline, here are the configs i use. If there are any lines they are from freeservers plugin
-
My device is zgemma h7s
-
BBC, Sky 68.5e on ncam 10.9
-
You didn't asnwer me mate.
My mgcand or n line are not working on v10.9. they work fine on 10.8
:hypnotised:
I have both sky and BBC on 68.5e working on 10.9 on pure2 6.5, could be an error in your config files
-
The bin file work nothing wrong .... maybe the script path of PURE..
Does emu show in panel ?! If Yes then the script in correct path ...
See in /tmp folder if you find ncam.log then the emu work.
Thanks a lot @fairbird!
I don't know if it is image's fault since Ncam 10.8 works fine with the same PURE image.
I'll check log file, as you advise me.
Anyway, thank you very much!
I had similar problems where it was working on 10.8 and not 10.9, then I choose the openssl binary and replaced it in /usr/bin/cam then it worked. Try that version, also start scripts of pure2 point to a different config folder in etc vs usual /etc/tuxbox/config check your start script in /usr/script*/cam. Open in notepad edit appropriately.
-
Kihmathi, which image did you use to flash your H7 from USB stick exactly? Normal, 4 partitions or the special 2 partition image v. 6.3?
Panda555 - the same here with E2iStream in 6.3. 6.4 has it in feeds? For another box, with v. 6.5, it's not yet in feeds. E2iPlayer also can't be updated but not sure why. Must ask the dev in charge of it... :)
Normal 4 partitions image
-
@ Kihmathi - it is generally polite to answer a question... You asked a Q, I answered and asked you a Q back in post no. 494...
So...???
Sorry about that, am currently on pure2 6.4 however i believe i used pure2 6.3 for fresh flash from usb, thereafter i always do an online flash to second partition at which point i switch to pure2 6.4 on second slot, first slot i then overwrite with openspa. those are the only two images i use.
Reason for installing pure2 on 2nd slot is that it gains lots of space or lets say the remainig enitre unsed space is available for pure2, due to the many good fnc plugins on first partition i tend to find myself almost utilizing the small partition
-
Indeed, that's the "cheat the circumstances" step I would do, too... :rasta2bigsmoke0gf1::P:thumbup:
Btw, Giggzy, are you using PurE2? If you do, it's not Estuary skin?
Hello yes i have PurE2 on the H9. I use and love GB blue skin. It feeds me data the way i like it.
PurE2 > MENU > Setup > Service Searching > Blind scan > good luck... ;)
Blindscan doesn't work on Cband.
Try the attached satellite.xml
FTP the file to etc - enigma2 and reboot box
Then try a manual scan
I dont Use C band, so report back if it works or not
Thanks i will try and revert.
waiting for the results, I also had same issues on the sat, I will also try to move my dish and try
-
A unique PurE2 image for Zgemma H7 with only 2 partitions!
And I quote:
"Zgemma H7 image with only two, bigger partitions in flash (cca. 1.5GB)
To use it, it is necessary (only once) to flash this image via USB and the button on the front panel.
After this you can freely flash images on-line (from SW manager or pure2 manager) in STARTUP_1 or STARTUP_2."
To return to 4 partitions in Zgemma H7 Flash, one uses a "normal" image, which repartitions the H7 Flash.
And both 2 and 4 partitions images partition the H7 flash CORRECTLY, unlike many other images... ;)
So, a unique, top quality image (what else do you expect from PurE2 Team ) for the discerning, serious hobbyist with serious demands...
So, by default Zgemma H7 has 4 partitions. This unique image repartitions the eMMC/flash. It must delete everything on it in order to make a new partitioning system with only 2 larger partitions, of course, how else?
With the new partitioning scheme for zgemma h7, the 4 partition image to me is really a two partition image, the first partition is around 1 gb, then the others share the other partition, it's like they just create a mount point and assign it as a second, third and fourth partition, i can tell this by looking at the space available and how its used up as you install stuff to other partitions.
-
Well telnet init 4 and copying over my channel list is generally how I do it then init 3 but I find 76.5, 68.5 and 57e greyed out, so as a routine I at times also copy over the XML file overwriting what's there, by the way this only happens to me in pure2 in others I don't have that problem, i.e openatv, openpli, openspa etc which start with a blank channel list though openatv 6.2 starts with the same channel list but all satellites are configurable out of the box, in 6.3 openatv kicked out the custom channel list
-
abu ok I have downloaded latest image and can see by extracting rootfs that /usr/share is a symlink to /etc/tuxbox so am wrong, however /etc/enigma2 doesn't have the file or channels that exists once first setup is done, my guess is whatever dumps the custom German channels also dumps the offending satellite.xml in that folder, I will do a fresh install later and give feedback
-
abu baniaz kindly do check, the one in /etc/tuxbox is not the same as the one in /usr/share which is the full and probably latest version, initially to overcome this small annoyance I would copy it over from there to /etc/tuxbox and /etc/enigma2. That was before I discovered XML update in feeds.
The one that ships in tuxbox misses several cband satellite 76.5e, 68.5e and 57e, while 7w and 8w are presented old SATs that have long been updated.
-
Actually I discovered that when you do an online update sometimes the updates overwrite satellite.xml in etc and etc/tuxbox folder with a custom version that results in users in regions not captured in the custom xml having greyed out channels.
I would suggest that the two files in etc be pulled by the same feed that has the one in use/share. Indeed it's even so the first time you boot a fresh image, I have resorted to downloading latest XML file using XML update in the feeds
gorski request the developers to maintain or ship the full satellite.xml file in /etc/tuxbox and /etc/enigma2 folders, for the preconfigured channels it's understandable the target market but a virgin XML won't affect the preconfigured channels for your target market
-
gorski thanks a lot, and sure the team deserves a good one, will look into it soon
-
gorski could you request the team to include in feeds xupnp and udpxy.