Hi folks
Sorry for the candid questions but what are the prerequisites to open sly uk.
Im on vuzero 4k, openpli 9, updated ncam for ARM, cccam (opening sly DE).
However UK channels are not opening.
Does it come down to the cccam provider (which i guess it is) or am i missing sth?
Thanks in advance
Candid question, but can you confirm that with the newest version, it should help open Sly UK?
I know it works for DE.
Thanks in advance.
Hi.
Any further suggestions? Thanks in advance.
Hi
Thanks for your reply.
As previously mentioned, disecq set up did not change. I'm on 1.2,, no tone burst, no USALS (as manual pointing).
However if you have set up advise, I'd be interested to test.
Hi team,
[apologies if this was previously raised but could not find any similar scenario here]
I have a motorized 80cm dish (using disecq 1.2) with a VU Zero+ 4K receiver (kernel version 4.1.20 / 20210407) and i am experiencing "no signal" issue on some TPs (mostly on 23e when most of the signal strength on the majority of them is above 60%) and/or signal oscillation varying from 35% down to 10% on a couple of TPs (Hispasat) without reason (I'm on OpenPLi 8.2).
Previously i had a Formuler F4 turbo and never had any similar behaviour (and no setup was changed only the receiver).
I am tempting to test with other coax cables but would rather have your opinion/suggestions first because I read on several forums that it might be tuner/hardware related and, if the case, no solution is currently available .
thanks in advance for your replies.
Hi,
Apologies if this has already been asked, but is there a way to set up a rule to avoid the plugin the sync some channels based on their name during the list creation?
For example, if i don't want to have UHD channels appearing in the different lists, is this possible via a config tweak?
thanks in advance for your replies.
Hi there
sorry to hijack this thread but has there been a recent change on the Abertis channel TP location?
As an example, on 11222H I can only open La 1 HEVC, La 2 HEVC TVE Star (Black screen). The others report no data on the transponder.
Issue seems to have started a week ago approx.
Anyone experienced the same?
Thanks
Hi there
Has there been a recent change on the Avertis channel TP location?
As an example, on 11222H I can only open La 1 HEVC, La 2 HEVC TVE Star (Black screen). The others report no data on the transponder.
Issue seems to have started a week ago approx.
Anyone experienced the same?
Thanks
Display More@beam335 your ncam.conf and ncam.services are fine.
You have to put the whole string "disablecrccws_only_for " not to affect other caids, because what I've posted yesterday was only for SKY_de "caid 098D", ( disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;098C:000000;098D:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000 )
Go to a SKY_DE channel in your box (preferably one of Cinema package) and wait a little bit until it opens, otherwise the problem is with the lines you use.
works perfectly! thanks a bunch
I suspect this is to commemorate Presidents Day today.
QQ does the auto key updater function in ncam only work for powervu? also BISS?
Thanks in advance.
All good on Formuler F4 turbo and latest openPLI vers. Good work!
yes the conf files are similar - but maybe by pure luck, i managed to get the perfect configurations under ncam to have those channels opened.
I finally managed to have all powervu channels up and running, not with OSCAM- emu but NCAM (mips_V10.8-r0) - so the issue was surely with the client compatibility.
I thought i'd update this thread in case , other folks are facing the same issue.
Why you use enigma2-plugin-systemplugins-autocamsetup?
Is a problematic plugin
i am trying to have an automatic switch from oscam to ncam/emu for powervu/BISS keys (and never experienced issue) - however you raised a valid point: i removed the autocam plug, rebooted the system and then tried to remove oscam-emu (but the same).
i might have to wait for a more recent plugin version to be released and try to upgrade.
but until then, ncam does the trick.
this is madness, - i can download and see the ipk in the root directory but when i try to reinstall it, i get the same msg again
i'm considering giving up :-(
there you are. you can see the package in the list.
thanks
thanks all for your feedback but even after following those manual removal recommendations, the message was still there and the plug in was still detected as installed -thus no possibility to reinstall it from feed plugins.
but as an alternative i installed the ncam plugin and i managed to have the set up as previous.
user-script oscam delette
sorry, what do you mean?
unless i'm looking at the wrong directory, the ipk is still reported as installed :-(
who else from this forum has managed to manually remove the oscam-emu completely (on openpli)? or even better would have the following ipk: enigma2-plugin-softcams-oscam-emu (git1825+c46c72d-r0.0)
thanks
