Posts by lonas

**lonas** · Apr 2nd 2017

Here I leave the version of NCam 1.4-r0 (official), I hope it is all to your liking.

Changelog:

Code

#########################################################################

 NCam cardserver v1.4-r0, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
 Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).
 Visit https://www.lonasdigital.com/ for more details.
 Source Code: https://github.com/javilonas/NCam

#########################################################################

**********************************************************************************************
 Important notice !!
 
 This is the OFFICIAL version (02.04.2017)
 There are no later versions.
 
 If you have downloaded any version, listed as 1.5, 1.6, 1.7, etc ... These are FAKE versions.
 Be very careful when downloading non-OFFICIAL versions, 
 we are not responsible for those versions or what their authors may have added.
 
 Signed: Javier Sayago (Javilonas)
***********************************************************************************************

Compiled:

ncam.mips                         Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc                  Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                          Linux PC (32 bit - i686).
ncam.x86_64                       Linux PC (64 bit).
ncam.ppc                          Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                      Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                          Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon          Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian                 ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android                  ARM (For all api android).
ncam.arm-marvell                  ARM (Synology DS114, DS214 and similar).
ncam.arm-mca                      ARM (For Matrix CAM Air).
ncam-router.mips                  Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips   Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe                   Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

***********************************************************************************************

Ncam settings web::

Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam

Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.

Change serverip 192.168.xx.xx for the ip of the receiver.

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config

SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.

If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225

***********************************************************************************************

Changelog v1.4-r0:

- Added support for stapi5.
- New config somewhat more globalized (If you have cuts, adjust the config to your needs).
- Increased values of ECM_FMT_LEN, CXM_FMT_LEN, and MAX_ATR_LEN.
- Compiled with new FLAGS to avoid problems in 4k architectures.

--------------------------------------------------------------------
--------------------------------------------------------------------
 -------------
 Legal warning
 -------------
 NCam does not emulate by default any payment signal without its corresponding suscription. 
 You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
 nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------

If you want to invite me for a beer: https://www.paypal.me/Javilonas

Display More

If I have forgotten something or there is a last minute problem, it will be fixed in the next version.

**lonas** · Apr 2nd 2017

Quote from mrman

Sorry don't understand what to do with the ncam.cortexa9hf-vfp-neon file. I have Ncam1.1 already on the reciever, but i don't know how to update.

Rename the binary to ncam, assign permissions 755 and upload the contents of the files to /var/tuxbox/config
Then run ncam either by telnet with ncam -b or by a script that you must create yourself.

**lonas** · Apr 2nd 2017

Resubmitted with the version for Matrix Cam Air, I forgot to add it hehe

**lonas** · Apr 1st 2017

New forum system? I like it hehe

**lonas** · Apr 1st 2017

Hello!!!

new version NCam 1.3-r7 ;)

Changelog:

Code

#########################################################################


 NCam cardserver v1.3-r7, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
 Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).
 Visit https://www.lonasdigital.com/ for more details.
 Source Code: https://github.com/javilonas/NCam


#########################################################################


**********************************************************************************************
 Important notice !!
 
 This is the OFFICIAL version (01.04.2017)
 There are no later versions.
 
 If you have downloaded any version, listed as 1.4, 1.5, 1.6, etc ... These are FAKE versions.
 Be very careful when downloading non-OFFICIAL versions, 
 we are not responsible for those versions or what their authors may have added.
 
 Signed: Javier Sayago (Javilonas)
***********************************************************************************************


Compiled:


ncam.mips                         Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc                  Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                          Linux PC (32 bit - i686).
ncam.x86_64                       Linux PC (64 bit).
ncam.ppc                          Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                      Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                          Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon          Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian                 ARM (Raspberry pi 3, Prismcube and other similars).
ncam.arm-android                  ARM (For all api android).
ncam.arm-marvell                  ARM (Synology DS114, DS214 and similar).
ncam.arm-mca                      ARM (For Matrix CAM Air).
ncam-router.mips                  Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips   Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64.exe                   Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


***********************************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive for default , it is not possible to delete it, but yes disable it.


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


***********************************************************************************************


Changelog v1.3-r7:


- Added support for more architectures.
- Improved support for CCcam multiport.
- Fix for ppc and ppc-old (user and pass).
- Fix libs for ppc and ppc-old.
- Fix posible crash in webif.
- New functions for loadbalance.
- Improved reload reader function on loadbalanced.
- New functions for ACOSC.
- Added IP information in the readers tab.
- Added Port last conection in the users tab.
- Fix for refresh tittle in status.
- New link to logo, embedded in base64.
- Improved connection between multics/newbox.
- Disable default debug.
- Update parse entitlements for streamguard.
- Fix ON/Off dvbapi.
- Add support for dvn jetcas.
- Streamrelay optimized.
- Fix excache in webif for rasp, prismcube, etc...
- Fix for "Skip CWs checksum test only for" in readers.
- Optimized German caid (try fewer freezes).
- Various arrangements during the tests during the last days.


--------------------------------------------------------------------
--------------------------------------------------------------------
 -------------
 Legal warning
 -------------
 NCam does not emulate by default any payment signal without its corresponding suscription. 
 You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
 nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me for a beer: https://www.paypal.me/Javilonas

Display More

**lonas** · Mar 19th 2017

Quote from ettore88

Hi guys.I ask you a small information. A few days ago it was written on the forum that the only Ncam official version is 1.1!To see the Canalsat channels... What version can I use?Thx in advance

Version 1.1-r2 is the latest version, it has been released right now.

The next version will be 1.2, all that is not called OFFICIAL or that follow the same order of numeration, are fake versions.

**lonas** · Mar 19th 2017

Quote from ishara

is there ncam info like cccam info

I'm working on an android APP and an exclusive PC program for NCam. For enigma2 already exist plugins for NCam.

**lonas** · Mar 19th 2017

The final version 1.1 is already here, I hope it's all to your liking;)

Code

#########################################################################




 NCam cardserver v1.1-r2, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
 Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).
 Visit https://www.lonasdigital.com/ for more details.
 Source Code: https://github.com/javilonas/NCam
#########################################################################




************************************************************************
 Important notice !!
 
 This is the OFFICIAL version (18.3.2017)
 There are no later versions.
 
 If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
 Be very careful when downloading non-OFFICIAL versions, 
 we are not responsible for those versions or what their authors may have added.
 
 Signed: Javier Sayago (Javilonas)
************************************************************************




Compiled:




ncam.mips                   Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc            Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86                    Linux PC (32 bit - i686).
ncam.x86_64                 Linux PC (64 bit).
ncam.ppc                    Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                    Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon    Enigma2 - (Cortex-A9 - Wetek Play and similar).
ncam.arm-raspbian           ARM (Raspberry pi 3, Prismcube and other similars).
ncam-router.mips            Routers (Routers MIPSEL DD-WRT).
ncam-x86_64.exe             Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).




************************************************************************




Ncam settings web::




Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x)
user: root
password: ldteam




Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config




SoftCam.Key Not included!!




If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225




************************************************************************




Changelog v1.1-r2:




- Added support for CCcam.cfg native.
- Added new option auto block sid in CCcam.
- Added support for auto restart reader after some time and extend reset cycle for network reader.
- Added friendly output debug message for CCcam.
- Added Support for streamguard.
- Update jquery-3.2.0
- Upgrade reader tongfang.
- Support httputf8 webif (on/off).
- Added latest OScam patchs till the date 18-03-2016.
- Tandberg ecm and emm algorithm fix.
- Added support radegast.
- Added Ping time feature.
- Added MAX accepted ECM time.
- Added Support for never retry failed load balanced things.
- Define which client can use option force reopen.
- Improved logging and enabled debug mode again.
- Live log active.
- Changes in webif status.
- New option of services in the reader to select a reader in priority.
- Added option ECM timeout limit.
- Fix NDS CWs are dropped when connected to real CCCam servers.
- Increase to 128 the service limit.
- Increase ECM length and Fix check_sec_len for some large ecm data.
- Fix card matching for prov is 0 in CCcam.
- General Arrays in CCcam Protocol, now works more like the native CCcam.
- Arrangements to reduce blockages and freezes.
- Support for Rasp pi 3 (Prismcube uses this same binary).
- Fixed the problem of anticascading.
- Fix for aggressive-loop-optimizations warnning.
- Add extended allowed timeframe request.
- Accept all providers when provider is not specified
- Add full support for multiport supported by Cs378x.
- add support AES key to dvbapi and newcamd
- Completely reconfigured by default. Do not forget to redo your config.




--------------------------------------------------------------------
--------------------------------------------------------------------
 -------------
 Legal warning
 -------------
 NCam does not emulate by default any payment signal without its corresponding suscription. 
 You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
 nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------




If you want to invite me to a beer: https://www.paypal.me/Javilonas

Display More

**lonas** · Dec 14th 2016

As far as I know, no one has added any new features that are not found in ncam git, only compiled and renamed 1.2 / 1.3, the reality is that version 1.1 has not yet been released, it is still being tested.

Everyone is free to compile and share their own compilation, but do not confuse users with imaginary changelogs and version number increases without any sense.

The official version is 1.1 and will be released soon, so I have decided not to upload a single commit more with the new changes to github, from now on it will be done privately in a private git.

The ideal, would have been something like ... Version compiled by x person directly from the official git, without any change, but to emphasize, and would have taken for good, but it is not of receipt auto plocamarse something that is not of Its authorship. It seems to me to lack of respect for the work that others do and the hours and hours of testing that we carry.

Ncam does not release unstable versions, so it will only see the light 1.1 when the team believes that version 1.1 is stable enough to see the light.

The cordial greeting

**lonas** · Jul 23rd 2012

New NCAM: 0.2.2!!

Added support CONAX ;)

Posts by lonas

NCam-1.4-r0 (Oficial)

NCam-1.3-r7 (Oficial)

NCam-1.3-r7 (Oficial)

NCam-1.3-r7 (Oficial)

NCam-1.3-r7 (Oficial)

What is the official latest version of Ncam?

ncam info plugin or extension

NCam-1.1-r2 (Official)

Ncam 1.2 Compiled by marouan

Ncam Based On Oscam For Enigma1, Enigma2, Spark & Linux PC