Display Morewelcome
I have a problem in emu channels four power vu " thor & Astra 4A 4.8E"
Brings the code but the channel does not work
Black screen
But when I use it " Mcas " Works well
My device is OPENBOX SX6 HD
Look for My config
Dear friend - From where do you download updated keydata.tmp file for Mcas of Openbox SX6? I also use the same box and want to get Mcas key file updated regularly. Please advice as it will be helpful for all Mcas users.Thanking you.
Display Morewelcome
I have a problem in emu channels four power vu " thor & Astra 4A 4.8E"
Brings the code but the channel does not work
Black screen
But when I use it " Mcas " Works well
My device is OPENBOX SX6 HD
Look for My config
Dear friend - From where do you download updated keydata.tmp file for Mcas of Openbox SX6? I also use the same box and want to get Mcas key file updated regularly. Please advice as it will be helpful for all Mcas users.Thanking you.
Anybody Knows about the possibility of decoding 4:2;2 feeds (with Biss encryption) with DM 900 UHD box?
I am sorry but your information is not correct, those are not linux receivers.
So please correct me. If not Linux what OS these have ? Tiger T8 High Class and Starsat 2000HD Extreme
It is Linux OS - Factory updated software for Tiger and Starsat receivers.
Sony @ 105e open in Linux boxes like Tiger T8 High Class / Starsat 2000 Hyper or Extreme but may be blocked again with the starting of FIFA (as TEN 3 will officially air it)
Yes - If your DM 900 box has no DVB S2X Multistream Tuner , buy it separately (Ex Ebay) and replace the tuner. It is plug and paly unit and image will identify it.
I use a 'customized' version of openATV 6.2 with Kodi fully working on my 2.30 SIM which for me is the most stable of all the images. Also looks great with a customized Seven or Blacky skin.
Good to hear. Do you use an original box or clone DM900?
1.What if change as " group + 1 " in all readers in above oscam.server file?
I want to configure oscam.config file to work with CCcam and Newcamd for TS 3 image with latest Oscam emu.
(DM 800 SE)
2.Will this Oscam.config file work with it?
( As given in https://linuxsat-support.com/c…th-dvbapi-configured-rar/)
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1
http_status_log = 1
[newcamd]
port = 10001@0963:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1
[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1
Link correction and reposting done.
I tested latest for clone.It is with CCcam and Oscam - Installed and working well in my box.
SIM230_openatv-6.2-dm900-20180507_0scam cccam231 rootfs.tar
Its not necessary to use oscam.dvbapi, PowerVU and your other readers will work fine without it.
Thanks MasterG for your advice. Greatly appreciated.
Thanks for the reply.
I have one more question. Although my oscam.conf shows dvbapi - enabled there is no oscam.dvbapi file found. It is necessary to have it in the box oscam to work normally? I so please get me the file for me. Awaiting for the reply.
I noticed that same question was asked in the thread few years a go but still got no answer. Please advice.
Enigma 2 boxes with Softcam Emu still can not decode Sony Pack @ 105.5e as still no solution found.But it opens in some Linux boxes only. I hope you have to wait till somebody finds the way to do it. Same issue is here -
Thanks for the reply.
I have one more question. Although my oscam.conf shows dvbapi - enabled there is no oscam.dvbapi file found. It is necessary to have it in the box oscam to work normally? I so please get me the file for me. Awaiting for the reply.
I have DM900 UHD Clone Sim 2.30 Arm7 box with SIM230_openatv-6.0-dm900-20170820 image (Only working image with my box among other images)
I installed enigma2-plugin-softcams-oscam.emu-11392_openatv_armv7ahf-vfp-neon.ipk in the box. (And replaced with Oscam-emu 11420)
My oscam.conf file -
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
lb_mode = 1
lb_save = 100
lb_reopen_mode = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox
[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1
[newcamd]
port = 10001@
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1
[cccam]
port = 12000
version = 2.1.4
ignorereshare = 0
stealth = 1
keepconnected = 1
My oscam.user file -
[account]
user = linuxsatsupport
group = 1
au = 1
My oscam.server file -
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000F E
I need to add readers to my oscam.server file to use with Contant.cw / softcam.key / CCcam server / Newcamd server
Please prepare oscam.server file for me.
Thanking you all in advance
Anyway thanks for the help given to all of my friends.
It is for Japhar Ferrari sim - My DM 900 is ARM7
Personally I prefer the Newnigma2 of February and the May version of the OpenPLi 6++, these are working great.
Emo
Is it for the clone box? Please give me the link so I could test it too.Thanks
