oscam-git11880-802@208972e6-vuplus4k_arm-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-mixed-upx-signed
Posts by Hannibal_Lecter
-
-
oscam-git11880-802@208972e6-vusolo4k-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-mixed-upx-signed
-
genau, never change a running system
-
It's easy to check whether it's coming from your line provider. Just get an OSCAM test line from Dr. G..gle. There are tons of them online.
-
please read here: oscam emu patch
-
oscam-2.25.03-11878
raspberry Pi 3 B + , Pi 4 B aarch64
raspberry Pi Model B ARMv6 Processor
-
2.25.03-11878@e6b928d6
Raspberry Pi 3 Model B
model name : ARMv7 Processor
Compiler: arm-linux-gnueabih
-
oscam-git11878-802
-
oscam-git11878-802
-
oscam-2.25.03-11877
raspberry Pi 3 B + , Pi 4 B aarch64
raspberry Pi Model B ARMv6 Processor
-
Try to change password
How to change password using Telnet with FTP prog DCC oder Filezilla.
open FTP Prog
enter your correct IP, or click on the magnifying glass
then on search, double click on the correct IP address and 2x ok, ready.
Now klick on Telnet:
user name: root (press enter)
write: passwd (press enter)
write the password you want (press enter) the entered password is not visible
write your new password again (press enter) the entered password is not visible
It should look something like this. It depends on what software and box you are using.
reboot
-
Mach mal folgendes:
[streamrelay]
stream_relay_enabled = 1
Telnet:
opkg update
opkg install libusb-1.0-0
opkg install libssl1.0.0 or libssl1.0.2
opkg install libcrypto1.0.0 or libcrypto1.0.2
opkg install libpcsclite1
opkg update && opkg upgrade
Neustart
-
Mutant HD60 Flash Instructions
1. Turn off the receiver using the power button on the back.
2. Unzip the image and copy the /hd60 folder and the "bootargs.bin" and "fastboot.bin" files to a formatted FAT32 USB flash drive.
In my experience, smaller USB flash drives work best, e.g., (1 GB to 4 GB).
3. Insert the USB flash drive into the USB port on the box.
4. Press and hold the (small, inconspicuous) "U-boot" button on the left side of the receiver, look picture
5. Turn on the receiver using the power button on the back.
6. When FLSH appears on the display, the flash process has begun. Release the button.
The process takes about 5 minutes, and the receiver will then restart.
The new image can now be configured as desired.
-
Raspberry Pi 4/5 Debian12 64-Bit Version: 2.25.03-11877 Git: cd33226c
aarch64 z.B. für Dream One/Two
-
Compiled by Levi45
Oscam icam patch 11877 with emu r802 ipk/deb for all e2/sh4 boxes and imagesThx Levi45
-
-
aarch64 z.B. für Dream One/Two
oscam 11874 smargo IPV6 Neon SSL
-
oscam-git11874-802@a32ffba4-vusolo4k-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-mixed-upx-signed
-
oscam-git11874-802@a32ffba4-vuplus4k_arm-webif-dvbapi-ssl-libusb-libdvbcsa-emu-icam-mixed-upx-signed
-
oscam-git11872-802
