buy a HDMI v2 cable then you know it's going to work.
Posts by 2bagstew
-
-
Always replace cable that a not UK Sourced if you have a lead Replace with a 3A Red fuse buy a figure 8 C8 make sure the fuse is 3A
-
When the image starts to load how long do you wait before you come to the conclussion it has frozen as some images can take up to 4 minutes to load.....try waiting and see what happens....just a thought. cheers
Sorry Friends ive been away,
When i load any clone image it will start as normal but when i restart the box it load halfway then freeze i've left it for over an hour and it has not changed, reload another image it will restart but will freeze when i reboot again i'm using standard images not backups.
Thanks -
Hi.
It's a clone, it's SSL is 84b all the images used have had the SSL84b i have no problem loading a image, on to the box.
The images will load after it's initially been flashed, but when the box is restarted the images will start too load but will stop half way through & no amount of restating will get the images to load.Thank You.
-
Hi Reilly.
Thank you.
I've tried Mozzila, IE 8,9 & 10, also Google Chrome. still get the same result.
Regards.
-
Hi Satmate.
Thank You.
I have tried to reflash using dreamup also used a different power supply from a known working DM800se.
Same result.Regards
Stew.
-
Hi All
I have DM800se SSl84B, this is the problem, when i re-flash with any ssl84b image, the box will reboot ok, but when it too rebooting it, it will start to load the image but freeze halfway through. This happens with all images.
Has anybody seen this before, is there a fix or is the box knackered.Thanks.
2bagstew.
-
It says processing error so there must be a problem.
-
Hi
Is the flash drive mounted, try different drive, format the drive to fat32 then mounted -
What Image are you using ? generally :
1 format usb to FAT32.
2 put in rear usb socket, wait for the image to recognise the usb.
3 got to the mount menu then select mounts.
4 select mount: /media/hdd for hard disk recording or mount: /media/usb.
5 save then the box with reboot.Check the mount menu to see if they are mounted.
Hope this helps..Stew