I know its a blast from the past, but does anyone have one of the above receivers lying about they are not using anymore? willing to pay ££
Posts by ste141
-
-
the only files I have in /etc/epgimport/ are -
readme
rytec.sources
spainKoala.sources
I am using vix image if that helps
-
Hi guys,
I need some help!
Have 2 services - 1 with epg data and 1 without it, they are same channels just different sids and transponders
I currently get my epg data from rytec sources on crossepg
Is there any way of getting the epg data to show on both services?
Thanks in advance,
Ste
-
I'm not entirely sure what you mean but the image i'm using can be downloaded from the site https://www.raspberrypi.org/downloads/raspbian/
-
2019-07-10-raspbian-buster-lite, that is the latest image I downloaded from the official raspberrypi site. I've tried with the full version as well and getting the same issue.
Everytime I run the command I seem to get a different outcome, for example I just ran it again and got this -
root@raspberrypi:~# cd /usr/src
root@raspberrypi:/usr/src# svn co http://www.streamboard.tv/svn/oscam/trunk oscam-svn
A oscam-svn/Distribution
A oscam-svn/Distribution/doc
A oscam-svn/Distribution/doc/html
A oscam-svn/Distribution/doc/man
A oscam-svn/Distribution/doc/txt
A oscam-svn/Distribution/doc/man/oscam.provid.5
A oscam-svn/Distribution/doc/man/oscam.user.5
A oscam-svn/module-dvbapi.c
A oscam-svn/Distribution/doc/man/oscam.ac.5
svn: E200014: Checksum mismatch for '/usr/src/oscam-svn/Distribution/doc/txt/oscam.conf.txt':
expected: 101ca62dc977f0acc5546c0229ee995f
actual: 14679370e0282c6ec38123051f62b03e
-
mirodvd They are the exact steps i've already taken and I'm running the svn co http://www.streamboard.tv/svn/oscam/trunk oscam-svn command as root. I'm doing all the commands as root from when he tells you to in that guide.
-
Im trying to install oscam on the lastest rasbian-buster-lite following this guide Oscam server setup guide - Raspberry Pi from scratch.
Everything has gone well upto when I do svn co http://www.streamboard.tv/svn/oscam/trunk oscam-svn
this is what I get:
A oscam-svn/Distribution
A oscam-svn/Distribution/doc
A oscam-svn/Distribution/doc/html
A oscam-svn/Distribution/doc/man
A oscam-svn/Distribution/doc/txt
A oscam-svn/Distribution/doc/html/oscam.conf.5.html
A oscam-svn/Distribution/doc/man/list_smargo.1
A oscam-svn/Distribution/doc/man/oscam.whitelist.5
svn: E200014: Checksum mismatch for '/usr/src/oscam-svn/Distribution/doc/html/oscam.server.5.html':
expected: 2819e8faf699c1af15701053f2e0b975
actual: a6d41ea4d61500e54b5ff07d923826f7
I've ftp'd into the oscam-svn folder and it's not downloaded all the files from the web directory only the files above , does anyone have any idea why this would be?
Any help on will be greatly appreciated!
-
I've had a funny one on my conax nc+ card a few weeks ago I lost some channels but not all e.g Nat geo wild, Comedy central, tnt and more. My supplier has refreshed the card 3 times now with no luck. I'm receiving all the EMM's so I know its not that. Tried 2 different receivers and latest version of oscam. Its not the RSA as when I delete it from oscam I lose all channels.
Don't suppose anyone else had simlar issue?
-
-
Full Activation of the card only takes upto 2 hours. I think you should ask your supplier to resend activation make sure you stay on TVP 1 HD for 2 hours when they send it also make sure blockemm-u = 0 is set. After 2 hours then check you are able to receive all channels you have paid for.
Remember though to set back to blockemm-u = 1 after your package activation is successful.
-
Here is the config for nc+ conax card working 100% once you have the rsa.
[reader]
label = smart
protocol = pcsc
device = 0
caid = 0b01
rsakey = (you will receive this from your supplier)
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
As I said to you in pm allow unique emm only to activate the card then block uq emm after activation.
-
Tehwiz will definitely send you the rsa with your conax card well in my case they emailed it to me. Wish I had just renewed my conax card now last year instead of getting a seca one it was just cheaper to get that with full pacakage at the time than renewing my conax card.
They have asked me send them the seca card back to check it but have said it is likely nc have stopped it.
Not even sure if nc is planning to eventually be narga only and get rid of conax has anyone heard anything on this?
-
Am I done with mine? Just come back to my box from been away for few weeks to this
duo2 (0100&000068/5C00/3ABD/64:A2C56B48D39BE008E2F43782E654FC05): not found (1 ms) by smart (provider expired)
No channels clearing and no entitlements showing but I no for a fact that about 3 weeks ago my entitlements updated to sometime in March and I remember telling canthackit in a pm that my card had just updated.
I know from this link that nc+ are slowly stopping seca cards. http://satkurier.pl/news/16239…-parowanie-kart-seca.html
-
Newbie to OSCAM here. I've been enjoying AFN for the past couple of week. Have rescanned and got the channels back, but exactly what do I need to change in SoftCam.Key to get them to open again. I have found the old entries (Group 0x9E - P 00090001 - 0009000B) but exactly what do I need to change. Any help would be most welcome.
replace old key with these new keys
P 0009006A 00 0123456789ABCD ;AFN Spectrum 9.0E
P 0009006A 01 0123456789ABCD ;AFN Spectrum 9.0E
P 00090066 00 0123456789ABCD ;AFN Prime Atlantic Benelux 9.0E
P 00090066 01 0123456789ABCD ;AFN Prime Atlantic Benelux 9.0E
P 00090069 00 0123456789ABCD ;AFN Prime Pacific 9.0E
P 00090069 01 0123456789ABCD ;AFN Prime Pacific 9.0E
P 0009006C 00 0123456789ABCD ;AFN Family 9.0E
P 0009006C 01 0123456789ABCD ;AFN Family 9.0E
P 0009006D 00 0123456789ABCD ;AFN Movie Channel 9.0E
P 0009006D 01 0123456789ABCD ;AFN Movie Channel 9.0E
P 00090067 00 0123456789ABCD ;AFN News 9.0E
P 00090067 01 0123456789ABCD ;AFN News 9.0E
P 00090068 00 0123456789ABCD ;AFN Sports 9.0E
P 00090068 01 0123456789ABCD ;AFN Sports 9.0E
P 0009006B 00 0123456789ABCD ;AFN Sports 2 9.0E
P 0009006B 01 0123456789ABCD ;AFN Sports 2 9.0E
P 0009 00544CE1 AB6A053EF67E7D ;EMM Key 9.0E
P 0009 00540716 FCCD8E6C12268A ;EMM Key 9.0E
P 0009 0057B90F 2C280A7807F63D ;EMM Key 9.0E
P 0009 003E7E84 1B80AA69C85E8B ;EMM Key
at moment there no audio I don't know if it's technical issue or we need new oscam patch
Will these keys work for AFN channels on 1w?
-
Thanks for that:-)
-
How much is it a month?
How much does your dealer want?
approx £13 a month
Dealer wants £250!
-
My focussat card as expired and dealer is wanting to much for renewal so l'm looking for another working viewing card with or without sub (Not interested in s*y freesat cards!). If anyone has a focussat card with own online account I would take that.
-
Ok so I've enabled the extra options shown below but still the motor isn't moving I've also enabled the same extra options on the duo2 and that's still moving the motor fine with a signal. Really can't understand it because the settings on both the dm820 and the duo2 are exaclty the same. When I select a channel the little symbol is coming up showing that the dish is moving but I know it's actually not.
I know the tuner isn't faulty because my fixed 28.2 dish works fine with it no issue.
- - - Updated - - -
Sorted it I wasn't getting a signal with the lnb cable plugged tightly into the tuner, loosened it abit a viola a signal but had a look and saw the copper core at the end was in bad condition so cut it off and remade it. Working fine now tightly screwed in:-) This thread can now be closed.
-
I'll have a look at the extra options now but not sure why I'd need them on dm820 as motor moves fine using duo2 and can view any channel perfectly without the extra options.
-
Hi Lads,
Need some help with my dm820hd openatv image and motorized dish.
My dish moves perfectly fine with my duo2 vix image and the config in the picture below but with the same config and latest vhannibal channel list on my dm820 my dish just doesn't move at all. Only have one single tuner on dm820 so it's not that i'm selecting wrong tuner:-)
Tried newest openatv image and older 5.0 image with no luck.
Any help would be greatly appreciated.